|
DL QuickSpecs
|
DL20
|
|
DL60
|
|
DL80
|
|
DL120
|
|
DL140
|
|
DL145
|
|
DL160
|
|
DL160se
|
|
DL165
|
|
DL180
|
|
DL185
|
|
DL320
|
|
DL325
|
|
DL345
|
|
DL360
|
|
DL365
|
|
DL380
|
|
DL385
|
|
DL388
|
|
DL560
|
|
DL580
|
|
DL585
|
|
DL740
|
|
DL760
|
|
DL785
|
|
DL1000
|
|
|
ML QuickSpecs
|
ML30
|
|
ML110
|
|
ML115
|
|
ML150
|
|
ML310
|
|
ML330
|
|
ML350
|
|
ML370
|
|
ML530
|
|
ML570
|
|
ML750
|
|
|
BL QuickSpecs
|
BL10e
|
|
BL20p
|
|
BL25p
|
|
BL260c
|
|
BL280c
|
|
BL2x220c
|
|
BL30p
|
|
BL35p
|
|
BL40p
|
|
BL420c
|
|
BL45p
|
|
BL460c
|
|
BL465c
|
|
BL480c
|
|
BL495c
|
|
BL60p
|
|
BL620c
|
|
BL660c
|
|
BL680c
|
|
BL685c
|
|
BL860c
|
|
|
SL QuickSpecs
|
SL160z
|
|
SL165z
|
|
SL170s
|
|
SL170z
|
|
SL230s
|
|
SL250s
|
|
SL270s
|
|
SL2x170z
|
|
SL335s
|
|
SL390s
|
|
SL4540
|
|
SL4545
|
|
|
XL QuickSpecs
|
XL170r
|
|
XL190r
|
|
XL220a
|
|
XL230a
|
|
XL730f
|
|
XL740f
|
|
XL750f
|
|
|
CL QuickSpecs
|
CL1850
|
CL1850 G1
| |
CL380
|
CL380 G1
| |
|
|
|
|
|
|
|
Proliant BL465c G6 QuickSpecs |
US QuickSpecs |
|
|
|
|
|
|
|
|
|
Proliant BL465c G6 Overview
HP ProLiant BL465c Generation 6 (G6) Server
Blade
|
|
|
HP ProLiant BL465c Generation 6 (G6)
Server Blade
|
1. |
Access panel |
6. |
Smart Array E200i storage controller (optional
battery-backed write cache) |
2. |
Two (2) mezzanine I/O expansion slots |
3. |
Two (2) multifunction Gigabit Ethernet network adapter ports |
7. |
Local I/O connector |
4. |
Up to two (2) AMD Opteron™ 2400 Series processors |
8. |
Two (2) small form factor (SFF) hot-plug hard drive bays |
5. |
Eight (8) PC2-5300 Registered DIMM (DDR2-667) or PC2-6400
Registered DIMM (DDR2-800) memory slots |
9. |
Internal USB connector |
|
What's New |
- Support for HP NC553m 10Gb 2-port FlexFabric Adapter
|
|
At
A Glance |
This document covers the HP ProLiant BL465c G6 server
blade only. For more information on HP BladeSystem c-Class Enclosures
and HP BladeSystem c-Class Interconnect and Mezzanine Components, please
see the following:
The HP ProLiant BL465c G6 delivers
uncompromising performance and expandability, industry-leading management
tools, and the latest technologies for dense compute environments.
HP ProLiant BL465c G6 server blade includes:
- Processor:
- Up to two (2) Six-Core
AMD Opteron™ 2400 series processors
- Supports up to 2.6 GHz,
2.2 GHz HyperTransport™; 512 KB Level 2 cache memory per core;
6 MB Level 3 cache
- AMD Dual Dynamic Power
Management™ for optimum performance and reduced power consumption
- ServerWorks HT-1000 and
HT-2100 chipsets
- BL465c G6 Memory:
- Up to 64 GB of memory, supported
by eight (8) slots of PC2-5300 Registered DIMMs at 667 MHz or 32 GB
of memory, supported by eight (8) slots of PC2-6400 Registered DIMMs
at 800 MHz
- Supporting memory interleaving
(2:1)
- Storage Controller:
- Integrated Smart Array E200i
RAID controller with 64 MB cache (with optional battery-backed write
cache with an upgrade to 128 MB cache (BBWC)). Supports RAID 0,1.
- Internal Drive Support:
- Up to two (2) small form
factor (SFF) SAS or SATA hot plug hard disk drives
- Network Controller:
- Two (2) embedded NC370i
Multifunction Gigabit Ethernet Server Adapters
- One (1) additional 10/100
network adapter dedicated to iLO 2 Management
NOTE: The Gigabit Ethernet
adapters transmit from the server only at 2000 Mbps, full duplex per
port. For more information, see the "Network Controller"
item in Standards Features section.
- Mezzanine Support:
- Two (2) I/O expansion mezzanine
slots
- Supports up to (2) mezzanine cards
- Dual-Port FlexFabric
Adapter mezzanine option
- Dual-Port Fibre Channel Mezzanine options for
SAN connectivity
- iSCSI Ethernet mezzanine option for optimized
iSCSI connectivity
- Ethernet server adapter mezzanine options for
additional network ports
- 4X DDR InfiniBand (IB) Mezzanine (20 Gb/s)
options for low latency server interconnectivity (based on Mellanox
technology)
- I/O Accelerator mezzanine options for high
transaction rate local storage
- SAS mezzanine option for external direct attach
and shared SAS storage
- Internal USB Support:
- One (1) internal USB 2.0
connector for security key devices and USB drive keys
- Form Factor:
- HP ProLiant BL465c G6 server
blade plugs into the BladeSystem c3000 and c7000 enclosures
- Infrastructure Management:
- This server blade requires the latest version of the Onboard
Administrator firmware. This firmware release may also require other
subsystem firmware upgrades. For information on the latest firmware
versions, please see the Blades Firmware Maintenance website at:
https://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
- HP Integrated Lights-Out 2 (iLO 2) management processor for simplified
server setup, health monitoring and recovery, power and thermal
control, and lights-out remote administration.
- HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, control and optimize your IT infrastructure
through a single, simple management console. Insight Control supports
both Windows and Linux-based central management servers.
- HP Insight Dynamics for ProLiant, a product option, is an integrated
command center that enables IT Staff personnel to continuously analyze
and optimize a converged infrastructure, while automating and reducing
the cost of common data center tasks by as much as 40 percent. This
ultimately enables them to dynamically keep pace with the organization's
changing business requirements.
- Operating Systems and Virtualization Software:
- Supports Windows, RHEL, SLES, Solaris, VMware
ESX, Citrix XenServer
- Enclosures:
- HP offers three different c-Class server
blade enclosures to meet your individual needs:
- The HP BladeSystem c7000 rack enclosure is
10U high and holds up to sixteen (16) ProLiant BL465c G6 servers
plugged vertically.
- The HP BladeSystem c3000 rack enclosure is
6U high and holds up to eight (8) HP ProLiant BL465c G6 servers
plugged horizontally.
- Server blades, storage blades, and interconnect
modules are all designed to fit into the c7000 and c3000 enclosures.
- For additional enclosure information, please see:
https://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
- Warranty:
- This product is covered by a global limited warranty
and supported by HP Services and a worldwide network of HP Authorized
Channel Partners. Hardware diagnostic support and repair is available
for three years from date of purchase. Support for software and initial
setup is available for 90 days from date of purchase. Enhancements
to warranty services are available through HP Care Pack services or
customized service agreements. Hard drives have either a one year
or three year warranty; refer to specific hard drive QuickSpecs for
details.
NOTE: Server warranty includes
3-year Parts, 3- year Labor, 3-year on-site support. Warranty repairs
may be accomplished through the use of Customer Self Repair (CSR)
parts. These parts fall into two categories: 1) Mandatory CSR parts
are designed for easy replacement. A travel and labor charge will
result when customers decline to replace a Mandatory CSR part; 2)
Optional CSR parts are also designed for easy replacement but may
involve added complexity. Customers may choose to have HP replace
Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at:
https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
|
Standard Features
NOTE: For the
Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section. |
Processor |
Six-Core Processors |
AMD Opteron™ processor
Model 2435 (2.6 GHz, 6 MB L3 Cache, 75W ACP) |
AMD Opteron processor Model
2427 (2.2 GHz, 6 MB L3 Cache, 75W ACP) |
Low Power AMD Opteron processor
Model 2425 HE (2.1 GHz, 6 MB L3 Cache 55W ACP) |
NOTE: AMD Opteron
2400 series processors are 64-bit, six-core, and support AMD Virtualization™.
NOTE: Processor wattage references reflect Average CPU Power (ACP).
For more information on ACP visit: https://www.amd.com/powernow. |
|
Upgradeability |
Upgradeable to dual (2) processors |
|
Cache
Memory |
512 KB Level 2 cache memory
per core |
6 MB Level 3 cache memory |
|
Chipset |
ServerWorks HT-1000 and HT-2100 |
|
Memory | Type
| PC2-5300 DDR2 Registered DIMMs
at 667 MHz PC2-6400 DDR2 Registered DIMMs at 800 MHz | Standard | 2
GB (2 x 1 GB) | Maximum | 64
GB (8 x 8 GB) at 667 MHz 32 GB (8 x 4 GB) at 800 MHz |
NOTE:
Memory must be installed in pairs. |
|
Network
Controller |
Two (2) embedded NC370i Multifunction
Gigabit Ethernet Server Adapters with TCP/IP Offload Engine, iSCSI boot,
and optional accelerated iSCSI |
One (1) additional 10/100 network adapter dedicated to iLO 2 management
NOTE: The Gigabit Ethernet adapters
transmit from the server only at 2000 Mbps, full duplex per port.
NOTE: The iSCSI offload feature of the embedded multifunction adapter
requires the HP Accelerated iSCSI Pack. For more information, please see
the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12466_div/12466_div.html
|
|
Multifunction
Networking |
The embedded multifunction NC370i combines standard Gigabit Ethernet
networking, TCP/IP offload engine (TOE) acceleration, iSCSI boot, and
optional accelerated iSCSI into a single adapter.
- TOE moves the processing of data in the TCP protocol stack from the
server CPU to the network card, freeing CPU cycles for other activities.
With TOE, network communications are improved, and server efficiency
is increased. The NC370i offers TOE for Microsoft® Windows 2000
and 2003 environments.
- The iSCSI network boot (iSCSI boot) allows the BL465c G6 to boot from
a remote operating system (OS) image located on a storage area network
(SAN) within a Red Hat or SUSE Linux environment. The BL465c G6 uses
an iSCSI firmware image (iSCSI boot option ROM) making the remote disk
drive appear as a local, bootable C: drive. The BL465c G6 is configured
to connect to and boot from the iSCSI target disk on the network and
download the OS image from the iSCSI target disk. The iSCSI boot option
ROM is supplied by HP at no cost. The additional cost and mezzanine
slot usage of an add-in iSCSI HBA card is not required. Additionally,
the HP iSCSI boot solution includes scripts to significantly simplify
the installation process.
|
|
I/O Expansion Slots |
Two I/O expansion mezzanine slots (One x8 and one x4 PCI Express) |
|
Integrated Manageability |
HP Integrated Lights-Out 2 (iLO
2) management processor |
|
Storage
Controller | Smart Array E200i
Controller | 64 MB
memory module supports RAID 0,1 Available upgrades: 128 MB with Battery-backed
write cache | |
Maximum Internal
Storage |
Hot Plug SAS |
1.2TB SAS |
2 x 600GB Serial SCSI |
Hot Plug SATA |
1TB SATA |
2 x 500GB Serial ATA |
|
Graphics |
Integrated ATI RN-50 1280 x
1024 x 16M color (32 MB DDR1 memory) |
|
Graphics
Resolution Supported | Resolution
Color Depths |
1280 x 1024, 16.7M,
64k, 256, 16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16,7M, 64k, 256, 16
640 x 480, 16,7M, 64k, 256, 16 |
|
Fibre Channel Support |
Two (2) optional dual-port Fibre Channel HBAs are supported by the HP
ProLiant BL465c G6. Each mezzanine circuit board connects directly to
the server blade system board. These Fibre Channel HBAs are available
via option kits and must be ordered separately.
|
HBA mezzanine card option kits:
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
(PN 403621-B21)
- Based on the same field-proven ASIC, firmware, and driver technology
as Emulex's renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver
compatible with all Emulex HBAs
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
(PN 403619-B21)
- Uses common drivers which means that customers can standardize on
one QLogic driver whether they are using the QMH2462 or other HBAs powered
by QLogic
Emulex and QLogic Fibre Channel HBAs for HP BladeSystem c-Class feature:
- Optimal performance utilizing PCI Express
- 4/2/1Gb/s auto negotiating speeds (4Gb HBAs)
- Dual-ports for redundant path connections
- Up to two FC HBAs per server blade providing redundant FC HBA support
- Optimized for HP StorageWorks and supported by third party SAN vendors
- Support for Microsoft® Windows® and Linux operating system
environments
|
|
Compatible SAN |
HP ProLiant BL465c G6 server blades are optimized for HP StorageWorks
MSA, EVA, and XP
HP ProLiant BL465c G6 server blades are compatible with select 3rd party
SANs (please see blade storage page for more details:
https://h18004.www1.hp.com/products/blades/components/c-class-sans.html)
|
|
HP Virtual Connect |
HP Virtual Connect simplifies server connectivity to LANs and SANs, and
reduces costs. Unique HP Flex-10 technology makes maximum use of 10Gb
Ethernet bandwidth by allowing multiple ports within a single Industry
Standard connection that can be dynamically tuned to meet individual server
requirements. HP Virtual Connect Enterprise Manager (VCEM) provides a
central console to administer connections and workloads for thousands
of servers. For more information on Virtual Connect Ethernet, Fibre Channel
and management options see: www.hp.com/go/virtualconnect
|
|
HP Insight management software
|
HP Insight Foundation |
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: https://www.hp.com/go/foundation.
The foundation pack includes:
NOTE: In an effort to support reducing
our environmental impact, the HP Insight Foundation Suite for ProLiant
media will be available as a selectable option for this server at time
of order of a Factory Integrated Model. This will allow customers to order
the number of media kits that best meet their needs and eliminate receiving
unnecessary duplicate media.
|
HP Integrated Lights-Out (iLO) |
HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring,
power and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP iLO functions without additional software and
can be accessed from any location via a web browser. HP iLO works hand-in-hand
with HP Systems Insight Manager, Insight Control, and Insight Dynamics
for ProLiant, helping customers unleash the value of the ProLiant platform
and deliver the highest possible quality of IT service. For more information,
visit: www.hp.com/go/iLO
|
HP Insight Control |
HP Insight Control, a product
option, delivers essential infrastructure management that can help save
time and money by making it easy to deploy, migrate, monitor, remote control,
and optimize your IT infrastructure through a single, simple management
console.
Two versions of Insight Control are available, to serve environments requiring
either a Linux-based or a Windows-based central management server: HP Insight
Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, please
visit: https://www.hp.com/services/insight. |
HP Insight Dynamics for ProLiant |
HP Insight Dynamics for ProLiant,
a product option, is an integrated command center that enables IT Staff
personnel to continuously analyze and optimize a converged infrastructure,
while automating and reducing the cost of common data center tasks by as
much as 40 percent. As a powerfully integrated by design toolkit to accelerate
complex technology projects and simplify daily operations that ultimately
enable IT Staff personnel to dynamically keep pace with the organizations
changing business requirements. It enables them to plan capacity and power
continuously, balance across physical and virtual resources, and ensure
cost-effective high availability. It also enables IT organizations to provision
infrastructure consistently and automatically from pools of shared resources
using a self-service portal. Resources provisioned can range from a single
virtual machine to complex multi-tier environments and their associated
physical and virtual resource requirements. In addition to the previous
functional benefits, it also provides a cost-effective disaster recovery
for physical and virtual environments that works with HP StorageWorks Continuous
Access software for both the Enterprise Virtual Array and the XP storage
array allowing application environments to be reactivated in minutes with
the touch of a button to a remote location.
NOTE: For more information, visit:
https://www.hp.com/go/insightdynamics |
|
High Performance Clusters
|
HP Cluster Platforms |
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance Computing,
with a choice of servers, networks and software. Operating system options
include specially priced offerings for Red Hat Enterprise Linux and Novell
SLES, as well as Microsoft Windows HPC Server. A Cluster Platform Configurator
simplifies ordering. https://www.hp.com/go/clusters
|
HP HPC Interconnects |
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when integrated
within an HP cluster. Flexible, validated solutions can be defined with
the help of configuration tools. https://www.hp.com/techservers/clusters/ucp/index.html
|
HP Cluster Management Utility |
HP Cluster Management Utility
(CMU) is an HP-licensed and HP-supported suite of tools that are used to
manage large-scale Linux ProLiant systems. CMU includes software for the
centralized provisioning, management and monitoring of nodes. CMU makes
the administration of clusters user friendly, efficient, and effective.
https://www.hp.com/go/cmu |
HP HPC Linux Value Pack |
HP HPC Linux Value Pack (Value
Pack) is an HP-licensed and HP-supported specially priced software bundle
for the development and deployment of applications on HPC Cluster Platforms.
Value Pack includes the Platform LSF workload scheduler, the HP-MPI parallelization
library, the HP Unified Parallel C compiler and the HP Shmem library, as
well as the execution environments for the libraries and compiler. HP
HPC Linux Value Pack |
|
Availability |
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Two embedded Gigabit Ethernet adapters for redundant LAN connections
Two hot-plug SAS/SATA hard drive bays and integrated RAID (Smart Array E200i) controller on every server blade (Battery-backed write cache is optional.)
Redundant ROM on each server blade
Multiple mezzanine I/O expansion
ECC Memory
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)
|
|
Industry Standard Compliance |
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
|
|
Security |
Power-on password
Administrator's password
Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
Integrated Lights-Out 2 can be disabled via a Global Setting
|
|
Factory
Express Portfolio for Servers and Storage |
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server
model please contact your sales representative or go to: https://www.hp.com/go/factory-express. |
|
HP Enterprise Configurator |
The HP eConfigure Enterprise Configurator now provides factory default
racking for our HP hardware portfolio. This approach is aligned with our
strategic direction to meet the needs and expectations of our valued customers.
If you require "custom" rack configuration, please contact HP's
Customer Business Center or an Authorized Partner for assistance. https://www.hp.com/products/configurator.
|
Service and Support
Service and Support |
HP Care Pack Services: Packaged server and storage services for increased
uptime, productivity and ROI
When you buy HP server and storage products and solutions, it's also a
good time to think about what levels of support you may need. Our portfolio
of service options reduce deployment and management worries while helping
you get the most out of your server and storage investments. We take a
holistic approach to your environment, bridging servers, blades, storage,
software and network infrastructures with our packaged HP Care Pack Services
for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment
warranties have matured along with technology. Good news that can also
create problems stemming from depending on standard warranties designed
to only protect against product defects and some downtime causes. Using
a standard approach to warranty uplifts, such as HP Care Pack Services,
helps reduce downtime risks and provides operational consistency for mission-critical
and standard business computing.
HP Care Pack Services: Upgrading or extending standard server and
storage warranties cost effectively
HP Care Pack Services offer a standard reactive hardware and software
support services suite sold separately, or combined with our Support Plus
and Support Plus 24 services. The portfolio also provides a combination
of integrated proactive and reactive services, such as Proactive 24 Service
and Critical Service. In addition with HP Proactive Select, you can acquire
the specific proactive constancy and technical services. HP Proactive
Select menu offers a broad set of service options that you can mix and
match depending on your specific requirements. Proactive service options
include offers for server, storage, network, SAN device, software, environment
and education services.
HP server and storage lifecycle support services offers a full spectrum
of customer care-from technology support to complex migrations to complete
managed services. HP Factory Express provides customization, integration
and deployment services for turnkey solutions. HP Education Services offer
flexible, comprehensive training on to help your IT staff get the most
out of your server and storage investments. HP Financial solutions extend
innovative financing and cost-effective asset management programs-from
purchase to equipment retirement.
Learn more: www.hp.com/services/servers
and www.hp.com/services/storage
NOTE: Care Pack Services availability
may vary by product and country.
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
- Services for customers purchasing from HP or an enterprise reseller
are quoted using HP order configuration tools.
- Customers purchasing from a commercial reseller can find HP Care Pack
Services at https://www.hp.com/go/lookuptool
|
|
Recommended HP
Care Pack Services for optimal satisfaction with your HP product |
Recommended Services |
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service, 6-
or 24-hour
Provides your IT manager with a team of support specialists who will quickly
begin troubleshooting the system to help return the hardware to operating
condition within 6 or 24 hours of the initial service request to the HP
Global Solution Center.
HP is committed to repairing your hardware within a maximum of six or
twenty four hours. The benefits include:
- Improved system uptime
- Predictable repair times
- More effective IT resource planning
- Consistent level of hardware support across your multi-technology
systems
https://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
|
|
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
Provides you with rapid remote support and if required an HP authorized
representative who will arrive on site any time and day of the year to
begin hardware maintenance service within 4 hours of the service request
being logged.
This service provides a trained HP service specialist to perform an installation
that meets HP quality standards, for:
- Help improve or maintain system uptime
- Convenient onsite support
- Committed response time
https://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
|
|
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner.
- Expedited installation, with all service prerequisites met before
the installation is performed
- Installation in accordance with manufacturer's specifications, enhancing
the supportability of your HP-installed hardware and software
- Service delivery at a mutually scheduled time
- Allows your IT resources to stay focused on their core tasks and priorities
- Availability of an HP service specialist to answer questions during
the onsite delivery of this service
https://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
|
|
Optional HP Care
Pack Services that will enhance your HP product experience |
Optional Services |
HP Enhanced Network Installation & Startup for BladeSystem Switches
Provides for the configuration and testing of BladeSystem Ethernet interconnect
switches to facilitate proper implementation of network protocols and
access to advanced features.
https://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW
|
|
3-Year HP Proactive 24
As an alternative to our recommended support level, for customers who
want enhanced operational effectiveness and proactive problem identification:
Provides improved stability, availability and operational effectiveness
with an integrated hardware and software support service that combines
industry-leading reactive technical assistance with proactive account
services, giving your IT manage support from a team of service specialists.
https://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-1614ENUC
|
|
HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services
and education courses
Provides a flexible way to purchase HP best-in-class consultancy and technical
services. You can buy Proactive Select Service Credits when you purchase
your hardware and then use the credits over the next 12 months.
https://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN
|
|
eSupport |
HP eSupport is a portfolio of technology-based services that assist you
with managing your business environment - from the desktop to the data
center.
Support Portal
The HP support portal provides one-stop access to the information, tools
and services you need to manage the daily operations of your IT environment.
Features include:
- Access to self-solve tools (including search technical knowledge base)
- Efficient logging and tracking of support cases
- Collaboration with other business and IT professionals
- Download of patches and drivers
- Access to diagnostic tools
- Proactive notification of relevant information
Access to certain features of the support portal requires an HP service
agreement. To access the support portal, visit: https://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for
your HP Servers and Storage, 24 X 7, so you can spend less time solving
problems and more time focused on your business. You can have your systems
remotely monitored for hardware failure using secure technology that's
been proven at thousands of companies around the world. In many cases,
you can avoid problems before they occur.
|
|
Customer Technical Training |
In today's cost-conscious business environment, IT professionals, developers,
consultants and users face an interesting challenge: how to keep up with
the latest technologies and expand important skills while delivering profitable
results on current projects. To help address this challenge, HP offers
innovative training solutions that help keep you up-to-date on virtualization,
server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related
topics-while spending less time away from business-critical activities.
|
|
HP Services Awards |
HP Technology Services continues to be recognized for service and support
excellence by customers, partners, industry organizations and publications
around the world. Recent honors and award reflect our services team's
dedications, technical expertise, professionalism and uncompromising commitment
to customer satisfaction.
|
|
Models
Six-Core Models
|
NOTE:
Not all models are available in all regions. Check with your local country
HP offices for availability.
NOTE: For the Standard Features shipped in the "Factory Integrated
Models", please see the "Configuration Information - Factory Integrated
Models" section.
|
HP ProLiant BL465c G6 2435 6C 4G 1P
539791-xx1
HP ProLiant BL465c G6 2427 6C 4G 1P
539794-B21
HP ProLiant BL465c G6 2425HE 6C 4G 1P
539797-B21
| Processor(s)
One of the following depending on model |
(1) AMD Opteron™ processor Model 2435 (2.6 GHz)
(1) AMD Opteron processor Model 2427 (2.2 GHz)
(1) Low Power AMD Opteron processor Model 2425 HE (2.1 GHz)
|
Cache Memory
One of the following depending on model |
512 KB Level 2 cache memory
per core
6 MB Level 3 cache memory |
Memory |
4 GB (2 x 2 GB) PC2-6400, Registered
DDR2-800 |
Network Adapter |
Two (2) embedded NC370i Multifunction
Gigabit Ethernet Server Adapters and one (1) additional 10/100 server adapter
dedicated to iLO 2 management |
Storage Controller |
Smart Array E200i Controller
with 64MB (optional battery-backed write cache) |
Hard Drives |
No drives included; (2) SFF
SAS/SATA drive bays |
Internal Storage |
Up to 1.2TB SAS
Up to 1TB SATA |
Optical Drive |
None |
Form Factor |
Up to 8 half-height blades supported
in the HP BladeSystem c3000 Enclosure
Up to 16 half-height blades supported in HP BladeSystem c7000 Enclosure |
|
Country Code Key
| xx=20 |
Brazil |
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard
models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is a factory installable option.
|
Step
1: Base Server Blade Configuration |
HP
Models |
HP ProLiant BL465c
G6 Configure-to-order Server |
539800-B21
|
Configurable Model
ships with: |
|
Two (2) embedded
NC370i Multifunction Gigabit Ethernet Servers Adapters and one (1) additional
10/100 network adapter dedicated to iLO 2 management |
|
Integrated Smart
Array E200i RAID controller
NOTE: Controller cache module selection
is required. Select either the standard 64 MB module or the optional 128
MB module in step 2 below. |
|
Two (2) small form
factor (SFF) SAS/SATA hot plug hard drive bays |
|
HP Integrated Lights-Out
2 management processor |
|
|
Step
2: Choose Required Options (one of the following from each list unless otherwise
noted) |
HP
Processors |
For single processor
configuration choose:
NOTE: If two (2) processors are desired,
select one xxxxxx-B21 and one xxxxxx-B21. |
|
AMD Opteron™
2435 2.6GHz Six Core 75 Watts BL465c G6 Factory Integrated Processor Option
Kit |
539792-B21 |
AMD Opteron™
2427 2.2GHz Six Core 75 Watts BL465c G6 Factory Integrated Processor Option
Kit |
539795-B21 |
AMD Opteron™
2425HE 2.10GHz Six Core 55 Watts BL465c G6 Factory Integrated Processor
Option Kit |
539798-B21 |
HP
Memory |
HP 2GB (2x1GB) Single
Rank PC2-6400 (DDR2-800) Registered Memory Kit |
|
HP 4GB (2x2GB) Single
Rank PC2-6400 (DDR2-800) Registered Memory Kit |
|
HP 8GB (2x4GB) Dual
Rank PC2-6400 (DDR2-800) Registered Memory Kit |
497767-B21 |
HP 8GB (2x4GB) Dual
Rank x4 PC2-6400 (DDR2-800) Registered Low Power Memory Kit |
|
HP 16GB (2x8GB) Dual
Rank PC2-5300 (DDR2-667) Registered Memory Kit |
408855-B21 |
HP 64GB (8x8GB) Dual
Rank PC2-5300 (DDR2-667) Registered Memory Kit |
|
NOTE:
Must be installed in pairs. |
|
HP
Storage Controller Cache |
HP Smart Array E200/64
2-ports Int PCIe x4 FIO SAS Controller |
|
HP 128MB SA641/642/E200
Battery Backed Write Cache
NOTE: Supports the Smart Array E200i
Controller, Smart Array 641 Controller, and Smart Array 642 Controller. |
|
|
BL465c G6 Core Options
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information. |
HP Ethernet Mezzanine
Options |
Gigabit Ethernet Mezzanines |
|
HP NC325m PCI Express Quad Port
1Gb Server Adapter for c-Class BladeSystem
NOTE: If the NC325m is installed
in mezzanine slot 1 of a half-height server, connectivity will be provided
on only 2 of the 4 ports. |
416585-B21 |
HP NC326m PCI Express Dual Port
1Gb Server Adapter for c-Class BladeSystem |
406771-B21 |
HP NC360m Dual Port 1GbE BL-c
Adapter |
445978-B21 |
HP NC364m Quad Port 1GbE BL-c
Adapter
NOTE: If the NC364m is installed
in mezzanine slot 1 of a half-height server, connectivity will be provided
on only 2 of the 4 ports. |
447883-B21 |
HP NC382m Dual Port 1GbE Multifunction
BL-c Adapter |
453246-B21 |
QLogic iSCSI Dual Port Adapter
with Virtual Connect for c-Class BladeSystem |
488074-B22 |
NOTE: The Gigabit
Ethernet adapters above transmit from the server at 2000 Mbps, full duplex
per port. For more information, see the "Network Controller" segment
in the Standards Features section. |
|
10 Gigabit Ethernet Mezzanines |
|
NOTE: A 10 Gigabit
Ethernet adapter is required for each server blade connecting to a 10Gb
interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP
BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB
of server memory.
NOTE: Each 10 Gigabit Either adapter supports linking at 1000Mbps
or 10000Mbps when not connected to a Flex-10 enabled module and will link
with all current 1Gb switches at 1Gb.
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring
of a FlexFabric Adapter to any of the supported protocols. For example iSCSI
to FCoE (Fibre Channel over Ethernet). Note that a HP Virtual Connect profile
takes precedence over the setting in this menu. Also, some FlexFabric Adapters
may require that network boot be enabled in order to configure the protocol.
If the protocol is configured without enabling network boot with certain
FlexFabric Adapters, the protocol may not take effect. Once the protocol
has taken effect on the first boot after configuring this option, network
boot may be disabled if desired. |
|
HP NC522m Dual Port Flex-10 10GbE
Multifunction BL-c Adapter |
467801-B21 |
HP NC532m Dual Port Flex-10 10GbE
Multifunction BL-c Adapter |
467799-B21 |
HP NC542m Dual Port Flex-10 10GbE
Multifunction BL-c Adapter |
539857-B21 |
HP NC550m 10GbE 2-port PCIe x8
Flex-10 Ethernet Adapter |
581204-B21 |
HP NC551m Dual Port FlexFabric
10Gb Converged Network Adapter |
580151-B21 |
HP BLc NC552m Flex-10GbE Dual
Port Adapter |
610609-B21 |
HP NC553m 10Gb 2-port FlexFabric
Adapter |
613431-B21 |
|
HP Fibre Channel
Mezzanine Options |
4Gb Fibre Channel Mezzanines |
|
Emulex LPe1105 4Gb Fibre Channel
Host Bus Adapter for c-Class BladeSystem |
403621-B21 |
QLogic QMH2462 4Gb Fibre Channel
Host Bus Adapter for c-Class BladeSystem |
|
|
HP Processors |
HP BL465c G6 AMD Opteron™
2435 (2.60GHz/6-core/6MB/75W) Processor Kit |
539792-B21
|
HP BL465c G6 AMD Opteron™
2427 (2.20GHz/6-core/6MB/75W) Processor Kit |
539795-B21 |
HP BL465c G6 AMD Opteron™
2425HE (2.10GHz/6-core/6MB/55W) Processor Kit |
539798-B21 |
|
HP Memory |
HP 2GB (2x1GB) Single Rank PC2-6400
(DDR2-800) Registered Memory Kit |
|
HP 4GB (2x2GB) Single Rank PC2-6400
(DDR2-800) Registered Memory Kit |
|
HP 8GB (2x4GB) Dual Rank PC2-6400
(DDR2-800) Registered Memory Kit |
497767-B21 |
HP 8GB (2x4GB) Dual Rank x4 PC2-6400
(DDR2-800) Registered Low Power Memory Kit |
|
HP 16GB (2x8GB) Dual Rank PC2-5300
(DDR2-667) Registered Memory Kit |
408855-B21 |
HP 64GB (8x8GB) Dual Rank PC2-5300
(DDR2-667) Registered Memory Kit |
|
NOTE: Must be
installed in pairs. |
|
|
BL465c G6 Hard Drives |
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and
the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer
to the specific hard drive QuickSpecs for details. |
|
SAS Hot Plug SFF (2.5-inch) Enterprise
(ENT) Drives |
|
HP 600GB 6G SAS 10K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
581286-B21 |
HP 450GB 6G SAS 10K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
581284-B21 |
HP 300GB 6G SAS 10K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
507127-B21 |
HP 146GB 6G SAS 15K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
512547-B21 |
HP 146GB 6G SAS 10K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
507125-B21 |
HP 72GB 6G SAS 15K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
512545-B21 |
SAS Hot Plug SFF (2.5-inch) Midline
(MDL) Drives |
|
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch)
Dual Port Midline 1yr Warranty Hard Drive |
507610-B21 |
NOTE: Please see
the QuickSpecs for Technical Specifications and additional information:
https://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide) |
|
SATA Hot Plug SFF (2.5-inch) Entry
(ETY) Drives |
|
HP 250GB 3G SATA 5.4K rpm SFF
(2.5-inch) Entry 1yr Warranty Hard Drive |
460355-B21 |
HP 120GB 1.5G SATA 5.4K rpm SFF
(2.5-inch) Entry 1yr Warranty Hard Drive |
458924-B21 |
SATA Hot Plug SFF (2.5-inch) Midline
(MDL) Drives |
|
HP 500GB 3G SATA 7.2K rpm SFF
(2.5-inch) Midline 1yr Warranty Hard Drive |
507750-B21 |
HP 160GB 3G SATA 7.2K rpm SFF
(2.5-inch) Midline 1yr Warranty Hard Drive |
530888-B21 |
NOTE: Please see
the Please see the QuickSpecs for Technical Specifications and additional
information:
https://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide) |
|
Additional Options
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information. |
HP Insight software
|
HP Insight Control |
|
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic
License
|
T9074BAE |
HP Insight Control
including 1yr 24x7 Technical Support and Updates Single Server License |
452148-B22 |
NOTE:
For additional license kits please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html |
|
HP Insight Software
Media Kit
NOTE: Insight Software DVD media
without licenses. Contains Insight Control, Insight Dynamics and Virtual
Connect Enterprise Manager. Uses an integrated installer to perform quick
and accurate software installation and updates. |
436222-B21 |
NOTE:
Licenses ship without media. The HP Insight Control Media Kit can be ordered
separately, or can be downloaded at: https://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key, and is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support &
Update Service.
NOTE: For additional license kits, including bundles with HP BladeSystem
enclosures, please see the Insight Control QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html |
|
HP Insight Control
for Linux |
|
HP Insight Control
for Linux including 1yr 24x7 Support Single Server License |
TC209A |
HP Insight Control
for Linux including 1yr 24x7 Support Electronic License
NOTE: This part number can be purchased
as a single license or as multiple licenses with a single activation key.
Customer will receive a license entitlement certificate via e-mail. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service.
NOTE: Electronic LTUs are only available through limited points of
sales; if not available, order a printed license entitlement certificate
instead. |
TC213AAE |
HP Insight Control
for Linux Media Kit
NOTE: Media pack DVD contains the
ISO image for HP Insight Control for Linux, HP Systems Insight Manager,
HP Insight Control power management, HP Insight Control virtual machine
management, and an integrated installer. Servers must be acquired separately.
NOTE: This Media pack is optional because the latest ISO image and
latest updates may be downloaded at no cost from: https://www.hp.com/go/ic-linux
(click on Download button). |
TC208A |
NOTE:
Licenses ship without media. The Media Kit for Insight Control for Linux
can be ordered separately, or can be downloaded at: https://www.hp.com/go/ic-linux
(click on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key, and are available in all countries except
China and Japan. Customers in China and Japan should order the physical
equivalent.
NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html |
|
HP Integrated Lights-Out
(iLO) Advanced for BladeSystem Remote Management |
|
HP iLO Advanced for
BladeSystem including 1yr 24x7 Support Single Server License |
512488-B21 |
NOTE:
Electronic licenses can be used to purchase multiple licenses with a single
activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the HP Integrated Lights-Out
2 QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html |
|
HP Insight Control
server deployment |
|
HP Insight Control
Server Deployment including 1yr 24x7 Support Electronic License |
T9082AAE |
HP Insight Control
Server Deployment including 1yr 24x7 Support Single Server License |
452151-B21 |
NOTE:
Licenses ship without media. The Insight Control Media Kit can be ordered
separately, or can be downloaded at: https://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key, and is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control
QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html |
|
|
High Performance
Clusters |
HP Cluster Management Utility
Compute Node License
NOTE: This part number can be used
to purchase one certificate for multiple licenses with a single activation
key. Each license is for one node (server). Customer will receive a printed
end user license agreement and license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online in
order to obtain a license key.
NOTE: For additional license kits please see the QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html |
436284-B21
|
HP Cluster Management Utility
Media and Management License
NOTE: Order a minimum of one license
per cluster to purchase media including software and documentation, which
will be delivered to the customer, and also licenses CMU management. No
license key is delivered or required.
NOTE: For additional license kits please see the QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html |
433257-B21
|
HP HPC Linux Value Pack One Processor
License
NOTE: This part number can be used
to purchase one certificate for multiple licenses with a single activation
key. Each license is for one socket (a.k.a. processor). Customer will receive
a printed end user license agreement and license entitlement certificate
via physical shipment. The license entitlement certificate must be redeemed
online in order to obtain a license key.
NOTE: For additional license kits please see the QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html |
TC293A |
HP HPC Linux Value Pack Media
NOTE: This part number can be used
to purchase media including software and documentation, which will be delivered
to the customer.
NOTE: For additional license kits please see the QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html |
TC294A |
|
HP Storage Controllers |
HP Smart Array P700m/512 4-ports
Ext PCIe x8 SAS Controller |
|
HP Smart Array P700m/256 4-ports
Ext PCIe x8 SAS Controller |
|
NOTE: Please see
the QuickSpecs for Technical Specifications and additional information:
https://h18000.www1.hp.com/products/quickspecs/13175_div/13175_div.html
(Worldwide) |
|
Optional Upgrade |
|
HP 128MB SA641/642/E200 Battery
Backed Write Cache
NOTE: Supports the Smart Array E200i
Controller. |
351580-B21 |
|
HP I/O Expansion Options |
HP StorageWorks 80GB IO Accelerator
for BladeSystem c-Class |
AJ876A
|
HP StorageWorks 160GB IO Accelerator
for BladeSystem c-Class |
AJ877A |
HP StorageWorks 320GB IO Accelerator
for BladeSystem c-Class |
AJ878A |
NOTE: Please see
the QuickSpecs for Technical Specifications and additional information:
https://h18000.www1.hp.com/products/quickspecs/13220_div/13220_div.html |
|
|
HP c-Class Mezzanines Options
|
HP InfiniBand Mezzanine Options |
|
HP 4X DDR IB Dual Port Mezzanine
HCA for HP BladeSystem c-Class |
448262-B21 |
|
HP StorageWorks Storage
Blades |
HP StorageWorks LTO-5 SB3000c
Tape Blade
NOTE: Please see the for Technical
Specifications and additional information at: https://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
(Worldwide) |
BS580A |
HP StorageWorks SB40c Storage
Blade and HP LeftHand VSA bundle
NOTE: Includes the SB40c Storage
Blade and a single LeftHand P4000 VSA license. LeftHand VSA software is
installed in a virtual machine on a VMware ESX host server adjacent to the
SB40c. |
AT459A |
HP StorageWorks D2200sb PCIe Storage
Blade
NOTE: The HP PCI Express Mezzanine
Pass-Thru Card (P/N 431643-B21) is required to support the HP StorageWorks
D2200sb PCIe Storage Blade with the BL620c G7. Up to two storage blades
are supported per server mix and match (Ultrium Tape, D2200sb PCIe Storage,
and/or PCI Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in
mezzanine slot 2 and/or 3.
NOTE: Please see the HP StorageWorks D2200sb PCIe Storage Blade QuickSpecs
for technical specifications and additional information at: https://h18006.www1.hp.com/storage/bladesystem/index.html |
AP880A |
|
HP USB and SD Options |
HP USB 2-Button Optical Scroll
Mouse (Carbonite/Silver) |
DC172B |
HP USB 04 Standard Keyboard
|
DT528A#ABA |
HP 2GB USB Flash Media Drive Key
Kit
NOTE: HP qualified blank USB key
for use with HP ProLiant servers that support the VMware virtualization
environment and other HP value-add software like SmartStart. HP recommends
this industry standard USB flash device for use with VMware ESXi. USB device
must be installed in the internal slot of the ProLiant server for use with
VMware ESXi. Refer to HP
VMware Getting Started Guide for installation instructions. |
608447-B21 |
|
HP Care Pack Services |
NOTE: The HP Care
Pack service part numbers below for ProLiant BL c-Class server blades, cover
the server blade and all HP branded hardware options qualified for the server,
purchased at the same time or afterwards, internal to the server. |
|
Hardware Services On-site Service |
|
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Years, Electronic |
UK065E
|
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Years, Electronic |
UK066E
|
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
UK067E
|
Memory
DIMM installation guidelines:
- All DIMMs must be PC2-5300 Registered DDR2 DIMMs (667 MHz) or PC2-6400
Registered DDR2 DIMMs (800 MHz).
- Both DIMM slots in a memory bank must be populated.
- Both DIMMs in a memory bank must be identical.
- Processor 1 memory bank A must always be populated.
- DIMM banks are active only when the corresponding processor socket
is populated.
- If installing only one bank on a processor, populate the bank physically
farthest from the processor.
- If mixing DIMM sizes on the same processor, the largest capacity DIMMs
must be populated in the bank physically farthest from the processor.
The smallest capacity DIMMs must be populated in the bank physically
nearest the processor.
- For optimal performance in most applications, populate the first memory
bank for every populated processor socket.
|
HP ProLiant BL465c
G6 Server Blade |
Standard Memory
2048 MB (2 x 1024 MB) or 4096 MB (2 x 2048 MB) of PC2-5300, or 4096 MB
(2 x 2048 MB) of PC2-6400, Registered DDR2 ECC DIMMs.
Standard Memory Plus Optional Memory
Up to 51200 MB or 53248 of PC2-5300 or 28672 MB PC2-6400, Registered DDR2
ECC DIMMs. Memory is available with the installation of optional PC2-5300
or PC2-6400, Registered DDR2 DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 65536 MB of PC2-5300 or 32678 MB PC2-6400, Registered DDR2 ECC DIMMs.
Memory is available with the removal of standard memory and the installation
of optional PC2-5300 or PC2-6400, Registered DDR2 DIMM memory expansion
kits.
|
BL465c G6 Memory
|
Slot
|
|
|
1A |
2A |
3B |
4B |
5C |
6C |
7D |
8D
|
Standard
|
4096 MB
|
2048 MB
|
2048 MB
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Optional |
28672 MB |
2048 MB |
2048 MB |
4096 MB |
4096 MB |
4096 MB |
4096 MB |
4096 MB |
4096 MB |
Maximum |
32678 MB |
4096 MB |
4096 MB |
4096 MB |
4096 MB |
4096 MB |
4096 MB |
4096 MB |
4096 MB |
Optional
|
51200 MB
|
8192 MB
|
8192 MB
|
1024 MB
|
1024 MB
|
8192 MB
|
8192 MB
|
8192 MB
|
8192 MB
|
Optional |
53248 MB |
8192 MB |
8192 MB |
2048 MB |
2048 MB |
8192 MB |
8192 MB |
8192 MB |
8192 MB |
Maximum |
65536 MB |
8192 MB |
8192 MB |
8192 MB |
8192 MB |
8192 MB |
8192 MB |
8192 MB |
8192 MB |
|
HP Memory |
Following are memory options available
from HP: |
|
HP 2GB (2x1GB) Single Rank PC2-6400
(DDR2-800) Registered Memory Kit |
497763-B21 |
HP 4GB (2x2GB) Single Rank PC2-6400
(DDR2-800) Registered Memory Kit |
497765-B21 |
HP 8GB (2x4GB) Dual Rank PC2-6400
(DDR2-800) Registered Memory Kit |
497767-B21 |
HP 8GB (2x4GB) Dual Rank x4 PC2-6400
(DDR2-800) Registered Low Power Memory Kit |
504351-B21 |
HP 16GB (2x8GB) Dual Rank PC2-5300
(DDR2-667) Registered Memory Kit |
408855-B21 |
HP 64GB (8x8GB) Dual Rank PC2-5300
(DDR2-667) Registered Memory Kit |
495605-B21 |
NOTE: Must be
installed in pairs. |
|
Storage
|
1-2 |
2 x SFF SAS or SATA Hot Plug Hard
Drives |
BL465c G6 Hard Drives
NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details. |
SAS Hot Plug SFF (2.5-inch)
Enterprise (ENT) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
600GB 6G SAS 10K DP
450GB 6G SAS 10K DP
300GB 6G SAS 10K DP
146GB 6G SAS 15K DP 146GB 6G SAS 10K DP
72GB 6G SAS 15K DP |
2
|
1-2
|
Smart Array E200i Controller |
|
SAS Hot Plug SFF (2.5-inch)
Midline (MDL) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
500GB 6G SAS 7.2K DP |
2
|
1-2
|
Smart Array E200i Controller |
|
SATA Hot Plug SFF
(2.5-inch) Midline (MDL) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
500GB 3G SATA 7.2K
160GB 3G SATA 7.2K |
2
|
1-2
|
Smart Array E200i Controller |
|
SATA Hot Plug SFF
(2.5-inch) Entry (ETY) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
250GB 3G SATA 5.4K
120GB 1.5G SATA 5.4K |
2
|
1-2
|
Smart Array E200i Controller |
Quickspecs
System Unit |
Dimensions
(H x W x D) |
7.154 x 2.19 x 20.058
in (18.17 x 5.56 x 50.95 cm) |
Weight
(approximate) |
Maximum
(all hard drives and processors installed) |
14.20 lb (6.44 kg) |
Minimum
(one hard drive and processor installed) |
10.75 lb (4.87 kg) |
Power Specifications |
For power specifications
including Input Requirements, BTU Rating, and Power Supply Output, please
see the HP BladeSystem c-Class Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
To review typical system power ratings use the HP BladeSystem Power Sizer
which is available via the online tool located at URL: https://www.hp.com/go/bladesystem/powercalculator |
System Inlet Temperature |
Operating |
10° to 35°C (50° to
95°F) at sea level with an altitude derating of 1.0°C per every
305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050
m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of
options installed.
System performance may be reduced if operating with a fan fault or above
30°C (86°F). |
Non-operating |
-30° to 60°C (-22°
to 140°F). Maximum rate of change is 20°C/hr (36°F/hr). |
Relative Humidity
(non-condensing) |
Operating |
10 to 90% relative humidity (Rh),
28°C (82.4°F) maximum wet bulb temperature, non-condensing. |
Non-operating |
5 to 95% relative humidity (Rh),
38.7°C (101.7°F) maximum wet bulb temperature, non-condensing. |
Altitude
|
Operating |
3050 m (10,000 ft). This value
may be limited by the type and number of options installed. |
Non-operating |
Maximum allowable altitude change
rate is 457 m/min (1500 ft/min). |
Acoustic Noise
|
For acoustic noise
specifications, please see the HP BladeSystem c-Class Enclosures QuickSpecs
located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html |
|
Smart Array E200i Controller
|
Disk Drive and Enclosure Interface
|
3G SAS (Serial Attached SCSI) |
1.5G SATA (Serial Advanced Technology
Attachment) |
SAS Connectors
|
2 internal (SFF8484) x4 wide port
connectors |
Cache Memory Speed |
DDR-1/266 MHz provides up to 4.2
GB/s maximum bandwidth. |
Server Interface
|
x4 2.5G PCIe provides 2 GB/s maximum
bandwidth. |
SAS Speed
|
x2 3 G SAS provides 600 MB/s maximum
bandwidth. |
Cache Memory
|
40-bit 64 MB or 128 MB cache: ECC
protection, battery-backed, and transportable |
Logical Drives Supported
|
Up to 32 logical volumes |
Maximum Logical Drive Capacity
|
500 GB (2 x 250 GB) |
Host Memory Addressing
|
64-bit, supporting greater than
4 GB server memory space |
RAID Support
|
RAID 1 (Mirroring) |
RAID 0 (Striping) |
Upgradeable Firmware
|
Upgradeable Firmware |
|
Embedded NC370i Multifunction
Gigabit Ethernet Server Adapter |
Network
Processor | Broadcom
5706 | Data Transfer Method | 100MHz
PCI-X | Network Transfer
Rate |
2000 Mb/s full duplex
NOTE: The Gigabit Ethernet adapters
above transmit from the server only at 2000 Mbps, full duplex per port.
For more information, see the "Network Controller" segment in
the Standards Features section. |
IEEE Compliance
| 802.1p, 802.1Q, 802.3, 802.3ad,
and 802.3x | Standard
Features |
- TCP/IP offload engine (TOE) for Microsoft Windows 2003
- iSCSI Boot
- Optional accelerated iSCSI
- 9K Jumbo frames
- TCP/IP checksum offload (TCO)
- Large send offload (LSO)
- Interrupt coalescence
- Dual address cycles (DAC)
- Wake-on-LAN (WOL)
- Pre-boot execution environment (PXE)
- ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
- IPv6 packet transmit and receive (excluding all offload capabilities);
IPv6 aware SNMPv1 agents for Microsoft Windows
|
|
HP Integrated Lights-Out
2 (iLO 2)
integrated on system board |
Architecture |
32-bit PCI-based health and remote
management ASIC |
Processor |
32-bit RISC processor core running
at 66MHz |
Upgradeability |
Option firmware upgradeable via
Flash ROM |
Operating System Support
|
Microsoft Windows Server 2008
Standard Edition (32bit and 64bit) |
Microsoft Windows Server 2008
Enterprise Edition (32bit and 64bit) |
Microsoft Windows Server 2003
and Windows Server 2003 R2, and Windows Server 2003 for Extended Systems
Standard Edition, Enterprise Edition |
Red Hat Enterprise Linux 5.4 (32bit
and 64bit) |
SUSE LINUX Enterprise Server 11
(32bit and 64bit) |
SUSE LINUX Enterprise Server 10
(32bit and 64bit) |
VMware ESX 4.0 |
VMware ESX 3.5.0 |
Microsoft Windows XP Professional
Edition |
Microsoft Windows Vista Business
and Ultimate Editions |
Red Hat Enterprise Linux Desktop
5.00 |
SUSE Linux Enterprise Desktop
11 |
SUSE Linux Enterprise Desktop
10 |
Client Browser Support
|
Microsoft Internet Explorer 7 |
Microsoft Internet Explorer 6 |
Firefox 3.5 (on supported Windows
and Linux systems) |
Firefox 3.0 (on supported Windows
and Linux systems) |
Command Line Support
|
Telnet, Secure Shell and serial
port access |
Secure Socket Layer |
Secure Shell version 2 (Password
and certificate) |
Security
|
Advanced Encryption Standard (AES)
and Triple Data Encryption Standard (3DES) on browser, CLP and XML scripting
interface |
RC4 encryption of video |
Directory Support Services
|
Active Directory v1.0 (Windows
2003) |
Driver Support
|
Health Driver (HP ProLiant iLO
2 Management Controller Driver)
iLO Management Channel Interface Driver |
Management protocols supported
|
SNMP 2, IPMI 2.0 (KCS interface),
DMTF Server Management Command Line Protocol Specification |
(SM CLP), DMTF Web Services Management
Specification (WS Management) |
|
Environment-friendly Products and Approach | End-of-life
Management and Recycling | Hewlett-Packard
offers end-of-life HP product return, trade-in, and recycling programs in many
geographic areas. For trade-in information, please go to: https://www.hp.com/go/green.
To recycle your product, please go to: https://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled,
recovered or disposed of in a responsible manner. The EU WEEE directive
(2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment. |
|
|