|
DL QuickSpecs
|
DL20
|
|
DL60
|
|
DL80
|
|
DL120
|
|
DL140
|
|
DL145
|
|
DL160
|
|
DL160se
|
|
DL165
|
|
DL180
|
|
DL185
|
|
DL320
|
|
DL325
|
|
DL345
|
|
DL360
|
|
DL365
|
|
DL380
|
|
DL385
|
|
DL388
|
|
DL560
|
|
DL580
|
|
DL585
|
|
DL740
|
|
DL760
|
|
DL785
|
|
DL1000
|
|
|
ML QuickSpecs
|
ML30
|
|
ML110
|
|
ML115
|
|
ML150
|
|
ML310
|
|
ML330
|
|
ML350
|
|
ML370
|
|
ML530
|
|
ML570
|
|
ML750
|
|
|
BL QuickSpecs
|
BL10e
|
|
BL20p
|
|
BL25p
|
|
BL260c
|
|
BL280c
|
|
BL2x220c
|
|
BL30p
|
|
BL35p
|
|
BL40p
|
|
BL420c
|
|
BL45p
|
|
BL460c
|
|
BL465c
|
|
BL480c
|
|
BL495c
|
|
BL60p
|
|
BL620c
|
|
BL660c
|
|
BL680c
|
|
BL685c
|
|
BL860c
|
|
|
SL QuickSpecs
|
SL160z
|
|
SL165z
|
|
SL170s
|
|
SL170z
|
|
SL230s
|
|
SL250s
|
|
SL270s
|
|
SL2x170z
|
|
SL335s
|
|
SL390s
|
|
SL4540
|
|
SL4545
|
|
|
XL QuickSpecs
|
XL170r
|
|
XL190r
|
|
XL220a
|
|
XL230a
|
|
XL730f
|
|
XL740f
|
|
XL750f
|
|
|
CL QuickSpecs
|
CL1850
|
CL1850 G1
| |
CL380
|
CL380 G1
| |
|
|
|
|
|
|
|
Proliant BL660c G8 QuickSpecs |
US QuickSpecs |
|
|
|
|
|
|
|
|
|
Proliant BL660c G8 Overview
HP ProLiant BL660c Generation 8 (Gen8) Server Blade
|
|
|
HP
ProLiant BL660c Generation 8 (Gen8) Server Blade
|
1.
|
Three (3) PCIe
3.0 mezzanine I/O expansion slots
|
6.
|
HP
c-Class Blade SUV (Serial, USB, VGA) connector
|
2.
|
Up to four (4)
Intel® Xeon® E5-4600 family processors
|
7.
|
MicroSDHC
card connector
|
3.
|
Two FlexibleLOM connectors
|
8.
|
Trusted Platform Module (TPM) connector
|
4.
|
Two
(2) small form factor (SFF) hot-plug drive bays
|
9.
|
Internal
USB 2.0 connector
|
5.
|
Thirty-two
(32) DDR3 DIMM memory slots (8 per processor)
|
10
|
Access
panel
|
|
What's
New
|
- Support
for 6G SATA Value Endurance Boot Solid State Hard Drives
|
Standard Features
NOTE: This document covers the HP ProLiant BL660c Gen8 server blade
only. For information on HP BladeSystems c-Class Enclosures and HP BladeSystem
c-Class interconnect and mezzanine options, please see the following:
HP
BladeSystem c-Class Enclosures QuickSpecs:
NOTE: For proper BladeSystem operation, the minimum required
versions of HP Onboard Administrator and HP Virtual Connect are required and available
via the HP Service Pack for ProLiant, please see https://www.hp.com/go/spp/download.
|
|
Processor
One of the following depending on Model
|
Eight-Core
Processors
|
Intel®
Xeon® E5-4650 (2.7GHz/8-core/20MB/130W) Processor
|
Intel®
Xeon® E5-4650L (2.6GHz/8-core/20MB/115W) Processor
|
Intel®
Xeon® E5-4640 (2.4GHz/8-core/20MB/95W) Processor
|
Intel®
Xeon® E5-4620 (2.2GHz/8-core/16MB/95W) Processor
|
Six-Core
Processors
|
Intel®
Xeon® E5-4617 (2.9GHz/6-core/15MB/130W) Processor
|
Intel®
Xeon® E5-4610 (2.4GHz/6-core/15MB/95W) Processor
|
Intel®
Xeon® E5-4607 (2.2GHz/6-core/12MB/95W) Processor
|
Four-Core
Processors
|
Intel®
Xeon® E5-4603 (2.0GHz/4-core/10MB/95W) Processor
|
|
Cache Memory
One of the following depending on Model
|
16MB or 20MB L3 cache
NOTE: For eight-core processors.
|
12MB or 15MB L3 cache
NOTE: For six-core processors.
|
10MB L3 cache
NOTE: For four-core processors.
|
|
Upgradeability
|
Upgradeable to four (4) processors
|
|
Memory
Protection
|
Data
bus ECC protection
|
Advanced
ECC / SDDC
|
Rank
sparring (on line spare)
|
Lockstep
mode
|
DIMM
address/control bus parity protection
|
Failed
DIMM isolation
|
Demand
scrubbing
|
Patrol
scrubbing
|
Memory
thermal control
|
|
Memory
One of the following depending on Model
|
Type
|
HP
SmartMemory
DDR3 Load Reduced (LRDIMM) and Registered (RDIMM)
|
Standard (Pre-configured Models)
|
128GB
(8 x 16GB) DDR3 1600MHz RDIMMs at 1.5V
128GB (8 x 16GB) DDR3 1333MHz RDIMMs
at 1.35V
|
Maximum
(LRDIMM)
|
1.0TB (32 x 32GB) up
to 1333MHz at 1.35V
|
Maximum
(RDIMM)
|
512GB (32 x 16GB) up
to 1600MHz at 1.5V
768GB (32 x 24GB) up to 1333MHz at 1.35V
|
NOTE:
HP memory from previous generation servers are not qualified or warranted with
this server. NOTE: HP SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen8. For
additional information, please see the HP SmartMemory QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMMs and RDIMMs are distinct memory technologies and cannot be
mixed within a server.
NOTE: Depending on the memory configuration
and processor model, the memory speed may run at 1600MHz, 1333MHz, or 1066MHz.
Please see Memory Population Table later in this document or the Online Memory
Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory"
section later in this document.
|
|
Network
Controller
|
Two (2) HP FlexibleLOM
connectors for one or two dual-port FlexibleLOMs
NOTE:
FlexibleLOM options include 10Gb FlexFabric, 10Gb Flex-10, and 10Gb Ethernet.
NOTE: FlexFabric capabilities require the use of an HP Virtual Connect
FlexFabric module. Learn more at: https://www.hp.com/go/bladesystem/interconnects
NOTE: The server supports one or two FlexibleLOMs.
NOTE: For
Pre-configured Model configurations, two FlexibleLOMs are already included; no
additional FLexibeLOMs are added.
NOTE: For a Factory Integrated Model
configuration with one FlexibleLOM, it is added in the HP Networking section of
"Step 2" in the Factory Integrated Models section.
NOTE: For
a Factory Integrated Model configuration with two FlexibleLOMs, the second FlexibleLOM
is a different part number. You must select the first FlexibleLOM in the "Step
2" HP Networking section and select the second FlexibleLOM in the "Step
4" HP Networking section.
NOTE: All FlexibleLOMs are dual port:
one port is routed to interconnect module bay 1 and the other to bay 2.
|
|
Expansion
Slots
|
Three (3) I/O expansion
mezzanine slots:
- x8 PCIe 3.0 Type A (supports Type A mezzanine cards)
(expansion slot 1).
- x16 PCIe 3.0 Type B (supports Type A and Type
B mezzanine cards (expansion slot 2).
- x16 PCIe 3.0 Type B (supports
Type A and Type B mezzanine cards (expansion slot 3).
Mezzanine card
options include:
- Dual-port to quad-port (depending on the model) 10Gb
FlexFabric, 10Gb Flex-10, 10Gb Ethernet, and 1Gb Ethernet for additional Ethernet
network ports.
- Dual-port 8Gb and 16GB Fibre Channel HBAs for SAN
connectivity.
- QDR and FDR InfiniBand for low latency and high bandwidth
server interconnectivity.
- HP Smart Array P721m Controller for direct
attached SAS Storage
- HP I/O Accelerator Options for higher I/O performance
and low latency access to storage, with the reliability of solid state
|
|
HP Server ROM
|
HP ROM (read only memory) is now digitally signed using HP's Corporate
Signing Service. This signature is verified before the flash process starts,
reducing accidental programming and preventing malicious efforts to corrupt
system ROM.
HP ROM provides for essential initialization and validation of hardware
components before control is passed to the customer-installed operating
system. The ROM also provides the capability of booting from various fixed
media (HDD, CD-ROM) and removable media (USB), to continue operation to
the operating system.
HP ROM performs very early configuration of the video controller, to allow
monitoring of initialization progress via an attached monitor. If configuration
or hardware errors are discovered during this early phase of hardware
initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the
Integrated Management Log (IML) to assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
- Processor and chipset status registers
- System memory, memory map, and memory initialization
- System hardware configuration (integrated PCI devices and optional
PCIe cards).
- Customer-specific BIOS configuration using the HP ROM-Based Setup
Utility (RBSU).
NOTE: For further information, please
refer to HP's RBSU (ROM based setup utility) user guide at www.hp.com/support/rbsu.
|
|
Storage Controller
|
All Models
|
One (1) embedded HP Smart Array
P220i Controller
NOTE: The HP Smart Array P220i supports
RAID 0 and 1. It includes 512MB flash-backed write cache (FBWC) on pre-configured
models and is optional on factory integrated models. The FBWC is not required
for RAID capability. The purpose of the cache is it can increase hard drive
write performance and provides data protection in case the server losses
power.
NOTE: The HP Smart Array P220i supports upgradeable firmware with
recovery ROM.
NOTE: The HP Smart Array P220i supports two (2) small form factor
(SFF) hot plug drive bays.
Available Options: Smart Array Advanced Pack 2.0 Software for enhanced performance,
reliability, availability, and security of system data
|
|
Maximum
Internal Storage
|
Hot Plug SFF
SAS
|
2.4TB
|
2
x 1.2TB
|
Hot Plug
SFF SATA
|
2.0TB
|
2
x 1.0TB
|
Hot Plug
SFF SAS SSD
|
1.6TB
|
2
x 800GB
|
NOTE:
The ProLiant BL660c Gen8 server includes the new HP hot plug small form factor
(SFF) SmartDrive carrier for enhanced management and reduced maintenance errors.
HP drives from previous generation servers are not compatible with the ProLiant
BL660c Gen8 drive bays.
NOTE: The mixing of standard SAS drives with
SAS SSD drives is supported within the server, but limits the RAID configuration
to two separate RAID 0 volumes. Mixing of other drives types is not supported.
|
|
Interfaces
|
Micro SDHC Slot
|
One (1) internal Micro Secure
Digital High Capacity (Micro SDHC) card slot
|
USB 2.0 Port
|
One (1) internal USB 2.0 connector
for USB flash media drive keys
|
NOTE:
The above options are for integrated hypervisor virtualization environments
needing a low cost boot solution with the highest performance and reliability.
|
|
Industry Standard Compliance
|
ACPI 2.0
|
Microsoft® Logo certifications
|
USB 2.0 Support
|
IMPI 2.0
|
Secure Digital 2.0
|
TMP 1.2 Support
|
IEEE (specific IEEE standards
depending on Ethernet adapter card(s) installed)
|
Advanced Encryption Standard
(AES)
|
Triple Data Encryption Standard
(3DES)
|
SNMP
|
SSL 2.0
|
DMTF Systems Management Architecture
for Server Hardware Command Line Protocol (SMASH CLP)
|
Active Directory v1.0
|
PCIe 3.0
|
SR-IOV capability (requires
network adapter and operating system support)
|
|
Enclosures
|
Enclosures HP offers two different c-Class server blade enclosures to
meet your individual needs:
- The HP BladeSystem c7000 rack enclosure is 10U high and holds up to
eight (8) ProLiant BL660c Gen8 servers plugged vertically.
- The HP BladeSystem c3000 rack enclosure is 6U high and holds up to
four (4) HP ProLiant BL660c Gen8 servers plugged horizontally.
- Server blades, storage blades, interconnect modules, power supplies,
fans, and redundant Onboard Administrator modules are all designed to
fit into the c3000 and c7000 enclosures.
NOTE: For additional enclosure
information, please see https://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
|
|
Graphics
|
Integrated Matrox G200 video standard
- 1280 x 1024 (32 bpp)
- 1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
- 16 MB Flash
- 256 MB DDR 3 with ECC (112 MB after ECC and video)
|
|
Form
Factor
|
HP ProLiant
BL660c Gen8 is a single-wide, full-height server blade that plugs into the HP
BladeSystem c3000 and c7000 enclosures.
|
|
On System Management
|
HP iLO Management Engine
|
HP iLO Management Engine is a comprehensive set of embedded management
features supporting the complete lifecycle of the server, from initial
deployment, through ongoing management, to service alerting and remote
support. HP iLO Management Engine comes standard on all HP ProLiant Gen8
servers. The HP iLO Management Engine portfolio includes:
- HP iLO: The HP iLO (Integrated Lights-Out) management processor
is the core foundation for the HP iLO Management Engine
- HP Agentless Management: Provides built in server health monitoring
and alerting capability without OS agents, that starts working the moment
a power cord and an Ethernet cable are connected.
- HP Active Health System: Always on, continuous monitoring for
increased stability and shorter downtimes; 100% configuration history;
Health and service alerts and easy export and upload to Service and
Support.
- HP Intelligent Provisioning: Lets customers provision and configure
a single server without any separate media. No more SmartStart CDs or
firmware DVDs are needed.
- To start Intelligent Provisioning:
- Press the F10 key during the ProLiant Gen8 server boot process
(also known as power on self test or POST).
- Please go to the Intelligent Provisioning website at www.hp.com/go/intelligentprovisioning
for additional information and to view usage videos.
- Use the Service Pack for ProLiant (SPP) at www.hp.com/go/spp
to get firmware and software updates.
- HP iLO Mobile App: Enables the ability to access, deploy,
and manage your server anytime from anywhere from select smartphones
and mobile devices. For additional information please visit: www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit:
https://www.hp.com/go/ilo or HP
iLO Management Engine technologies whitepaper
|
|
HP Insight management software
|
HP
Service Pack for ProLiant (SPP)
|
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) provide
a comprehensive approach to firmware and system software maintenance. Together
they provide better operating stability and ensure maximum uptime. The SPP will
be updated at a predictable cadence, typically coinciding with new HP server hardware
launches. By enabling firmware to be updated online and integrating firmware and
system software updates in one operation, HP SUM and the SPP offer faster updates
of individual servers and dramatically faster updates of entire BladeSystem enclosures.
Further improving system uptime and stability is the fact that HP provides 12
months of support for each Service Pack for ProLiant release.
The user
experience around HP SUM and the SPP has been improved in several ways, starting
with the web download. A single web page provides access to a single download
containing both the latest version of HP SUM and the latest SPP. Optional smaller
subsets with only specific types of servers or specific operating systems are
offered to save on download time. The HP SUM application provides a straightforward,
intuitive user interface that guides the user through the steps of discovery,
analyses and update, providing comprehensive information on available updates,
criticality and interdependencies. This information is also available in reports.
By providing the option of multiple local or shared repositories which can be
easily updated from hp.com, HP SUM provides the tools to optimize stability and
consistency throughout the company. While HP SUM and the SPP recommend the combinations
of firmware and system software that HP has found to be the best practice, the
application gives customers the flexibility to set their own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific
attention for interaction between firmware, drivers and agents both within the
server as well as in interaction with the BladeSystem enclosure components (Onboard
Administrator and Virtual Connect). This testing ensures the highest quality as
well as providing the input for HP SUM to deploy updates taking into account all
interdepencies, when determining the correct updates and order of update deployment.
NOTE:
The Service Pack for ProLiant (which includes HP SUM) can be downloaded from www.hp.com/go/spp/download.
More information can be found: https://www.hp.com/go/SmartUpdate,
www.hp.com/go/spp and https://www.hp.com/go/hpsum
|
|
Security
|
- Power-on password
- Administrator's password
- Keyboard password (QuickLock)
- HP iLO 4 On System Management Chipset with:
- SSL encryption
- Secure Shell version 2
- Advanced Encryption Standard (AES) and Triple Data Encryption
Standard (3DES) on browser, CLP and XML scripting interface
- AES and RC4 encryption of video
- External USB port enable/disable
- Network server mode
- Serial interface control
- TPM (Trusted Platform Module) 1.2 option
- Advanced Encryption Standard (AES)
- Intel® Advanced Encryption Standard-New Instructions (AES-NI)
- Intet TXT (require the TPM module option)
|
|
Availability
|
Memory
- Data Bus ECC protection provides automatic correction
from a single data bit error and detection of double data error bits. Often called
single error correction/double error detection (SEC/DED).
- Advanced ECC
uses single device data correction (SDDC) to detect and correct single and all
multi-bit error that occurs within a single DRAM chip. Both x4 and x8 SDDC are
supported (x8 requires lockstep mode).
- Memory online spare mode (also
known as rank spare mode) detects a rank that is degrading and switches operation
to the spare rank. HP offers the rank sparing rather than DIMM sparing as rank
sparing uses less spare memory resulting in reduced overhead.
- Memory
lockstep mode is used to correct a single x8 DRAM device failure on a DIMM. The
DIMMs in each paired memory channel must have identical HP part numbers.
- Memory
demand and patrol scrubbing prevent accumulation of correctable errors and reducing
the likelihood of unplanned downtime.
- Failed DIMM isolation improves
the service time thus improving the overall system availability.
- Address
parity protection available on RDIMMs and LRDIMMs detects address bit errors to
improve service time and overall system availability.
- Memory thermal control
is used to prevent DIMMs from overheating. Achieved by slowing down the memory
access rate per the temperature monitored by DIMM sensor.
|
Mezzanine options and
I/O
- One or two FlexibleLOM connectors each supporting two
(i.e. redundant) Ethernet ports routed to redundant interconnect modules.
- Multiple mezzanine I/O expansion slots that support a wide variety of
mezzanine cards each supporting multiple data paths routed to redundant interconnect
modules.
- Network Adapter Teaming (bonding) provides network fault
tolerance, transmit load balancing, and switch-assisted load balancing.
|
Storage
- Two (2) hot-plug SAS/SATA/SSD drive bays.
- Integrated HP Smart
Array P220i Controller with 512MB FBWC capability, RAID 0 and 1, and upgradeable
firmware with recovery ROM capability.
NOTE:
The 512MB flash-backed write cache (FBWC) is included on pre-configured models
and is optional on factory integrated models. The FBWC is not required for RAID
capability. The purpose of the cache is it can increase hard drive write performance
and provides data protection in case the server losses power
.
- Up
to eight optional HP D2200sb and/or D22020sb Storage Blades for attachment of
up to 12 drives per Storage Blade (up to 96 drives total) within the c-Class enclosure.
- Optional
dual-port Fibre Channel mezzanine card(s) for redundant SAN connections.
|
Processor/Chipset
- Processor internal sensors & thermal control protection against over-temperature
conditions.
- Cache parity/ECC protects cache data from accidental
data corruption.
- Machine Check Architecture (MCA) detects and captures
hardware errors such as system bus, memory ECC, parity, and cache, and improves
service time.
- Intel® QPI Protocol Protection allows detection
of data errors using a checksum of 8-bits.
- Core Disable for FRB (fault
resilient boot) allows a system to power-on despite a failing core-pair. It uses
BIST (built-in self test) results to detect a failure and disables the target
core-pair upon subsequent boot.
|
Server Blade Enclosure Infrastructure
- Pooled power for true
N+N power redundancy through up to six (6) hot-plug, high-efficiency, common slot
enclosure-based power supplies (configuration dependent).
- Up to
ten (10) redundant enclosure-based hot-plug HP Active Cool fans that scale to
meet future demands and optimize airflow, reduce power draw, and improve acoustic
performance.
- Dual grid power providing redundant rack enclosure power
feeds to the server blade enclosure.
- HP Dynamic Power Saver Mode
the total enclosure power consumption is monitored in real time and automatically
adjusted with changes in demand for improved efficiency and reliability.
- HP
Dynamic Power Capping safely limits power usage without impacting performance
by capping peak usage instead of average power usage, removes risk to electrical
infrastructure with a fast-acting, hardware-based capping algorithm, and reclaims
more power by dynamically controlling power limits based on workload demand.
- Up to eight interconnect modules per server blade enclosure providing
four simultaneous redundant fabrics for FlexFabric, Virtual Connect Ethernet,
Fibre Channel, InfiniBand, Pass Thru Ethernet, etc.
- Enclosure crosslinks
between adjacent enclosures to provide interconnect module-to-module connections
or as Virtual Connect module stacking links.
- Optional enclosure redundant
Onboard Administrator system management module.
|
|
Warranty
|
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of HP Authorized Channel Partners.
Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Enhancements to warranty services are
available through HP Care Pack services or customized service agreements.
Certain restrictions and exclusions apply. Hard drives have either a one
year or three year warranty; refer to specific hard drive QuickSpecs for
details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year
on-site support. Warranty repairs may be accomplished through the use
of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel and
labor charge will result when customers decline to replace a Mandatory
CSR part; 2) Optional CSR parts are also designed for easy replacement
but may involve added complexity. Customers may choose to have HP replace
Optional CSR parts at no charge. Additional information regarding worldwide
limited warranty and technical support is available at
https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
|
Optional Features
Fibre Channel Support
|
Up to three (3) optional Fibre Channel mezzanine HBAs are supported on
the HP ProLiant BL660c Gen8.
|
|
HP Virtual Connect
|
HP Virtual Connect is an interconnect
option for BladeSystem c-Class that simplifies server connectivity to data
and storage networks, and reduces costs. Unique HP Flex-10 technology makes
maximum use of network bandwidths, provide dynamic tuning and enable extreme
flexibility to meet individual server and infrastructure requirements by
allocating up to 4 network connections per server port. Virtual Connect
FlexFabric modules extend those capabilities to allocate one function per
port to storage connections. HP Virtual Connect Enterprise Manager (VCEM)
provides server management software with a central console to administer
network connections and workloads for thousands of servers. For more information
on Virtual Connect Enterprise Manager, see https://www.hp.com/go/vcem.
For more information on Virtual Connect Ethernet, Fibre Channel, Converged
Network and management options, see https://www.hp.com/go/virtualconnect.
|
|
HP Insight management software
|
HP Insight Control
|
HP Insight Control, a product
option, delivers essential infrastructure management that can help save
time and money by making it easy to deploy, migrate, monitor, remote control,
and optimize your IT infrastructure through a single, simple management
console. For more information, see https://www.hp.com/go/insightcontrol.
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. For more information about this
service, see https://www.hp.com/services/insight.
|
HP Matrix Operating Environment
|
The HP Matrix Operating Environment
(Matrix OE) for ProLiant and Integrity servers is an integrated command
center that helps you instantly adjust to dynamic business demands. This
advanced infrastructure management software lets you reduce the cost of
common data center tasks by up to 40 percent while keeping pace with your
changing business.
The HP Matrix OE includes the automated provisioning, optimization, and
recovery management capabilities for HP CloudSystem Matrix, the ideal
platform for private cloud and Infrastructure as a Service (IaaS). For
more information, see https://www.hp.com/go/matrixoe.
|
HP iLO Scale-Out
|
The HP iLO Scale-Out license
ideal for web/hosting/cloud service providers and High Performance Computing
environments. This license is a specific subset of iLO Advanced functionality,
provides fast remote access through Text Console via SSH, lower operational
cost with Dynamic power capping, and faster time to resolution through Email-based
Alerting and proactive notifications. With this newly designed HP iLO Scale-Out
license HPC customers now have a server management package solely design
and priced for their massive data environments. HP iLO Scale-Out is available
on all HP ProLiant Gen8 BL and SL platforms. For more information, see:
www.hp.com/go/iLO/scale-out
|
HP iLO Advanced
|
HP Integrated Lights-Out Advanced License a product option, providing
smart remote server management without compromise. iLO Advanced unlocks
the full set of remote administration functionality for all HP ProLiant
servers by activating the full Virtual Keyboard Video and Mouse remote
console, multi-user collaboration, console record and replay, GUI-based
and scripted virtual media and virtual folders, and enhanced security
and power management functionality. For more information, see: https://www.hp.com/go/iloadvance
|
|
High Performance Clusters
|
HP
Cluster Platforms
|
HP Cluster
Platforms are specifically engineered, factory-integrated large-scale ProLiant
clusters optimized for High Performance Computing, with a choice of servers, networks
and software. Operating system options include specially priced offerings for
Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft
Windows HPC Server. A Cluster Platform Configurator simplifies ordering. https://www.hp.com/go/clusters
|
HP HPC Interconnects
|
HP HPC Interconnects High Performance Computing (HPC) interconnect technologies
are available for this server as part of the HP Cluster Platform portfolio. These
high-speed InfiniBand and Gigabit interconnects are fully supported by HP when
integrated within an HP cluster. Flexible, validated solutions can be defined
with the help of configuration tools. https://www.hp.com/techservers/clusters/ucp/index.html
|
HP Insight Cluster Management
Utility
|
HP Insight Cluster Management
Utility (CMU) is an HP-licensed and HP-supported suite of tools that are used
for lifecycle management of hyperscale clusters of Linux ProLiant systems. CMU
includes software for the centralized provisioning, management and monitoring
of nodes. CMU makes the administration of clusters user friendly, efficient, and
effective. https://www.hp.com/go/cmu
|
|
Storage Software
|
Whether you need to solve a specific data protection, archiving, or storage
command and control challenge, or deliver on strategic consolidation,
compliance, or continuity initiatives, look no further than HP storage
software. Our storage software helps you reduce costs, simplify storage
infrastructure, protect vital assets and respond faster to business opportunities.
Storage software that gets the job done:
- Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HP data protection
and recovery software will cost-effectively protect you against disaster
and ensure business continuity.
- Data Archive and Migration Software
HP's storage software enables you to comply with data retention and
retrieval requirements, improve application performance, and reduce
costs by efficiently migrating infrequently accessed or less valuable
data to lower cost storage.
- Storage Resource Management Software (SRM)
HP's storage resource management software reduces operational costs
and provides the command and control foundation you need to efficiently
manage and visualize your physical and virtual environments.
- Data Replication Software
HP offers array-based and host-based replication software for use in
disaster recovery, testing, application development and reporting.
- Storage Device Management Software
Maximize your investment in HP storage and networking with software
that enables hardware-specific configuration, performance tuning and
connectivity management.
- HP StoreVirtual VSA
With HP StoreVirtual VSA you can use the power of virtualization to
turn a set of heterogeneous and disconnected physical disk drives in
your servers and storage devices into a single pool of logical storage
capacity.
NOTE: For more information available
Storage Software including QuickSpecs, please see: www.hp.com/go/storage/software.
|
|
HP Insight Online
|
HP Insight Online is a new addition
to the HP Support Center for one stop, secure access to product and HP support
information personalized to your IT environment. Insight Online can automatically
display devices remotely monitored by HP Insight Remote Support. With Insight
Online's easy navigation you can efficiently track your IT support contracts
and device status from anywhere and at anytime. https://www.hp.com/go/insightonline.
|
|
HP Proactive Insight experience
|
Prevent problems with innovative,
automated monitoring tools and proactive services. The HP Proactive Insight
experience consist of using Insight Online, Insight Remote Support, and
Proactive Care Support Service as one integrated solution. The Proactive
Insight experience provides you with expert advice and personalized, cloud-based
automated IT support, helping to prevent unplanned down time and solve problems
quickly. For more information, visit: www.hp.com/go/proactiveinsightexperience
|
|
Factory Express Portfolio for
Servers and Storage
|
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server
model please contact your sales representative or go to: https://www.hp.com/go/factory-express.html
|
|
HP Simple Configurator
|
SCE is a guided self service tool to help sales and non technical people
provide customers with initial configurations in 3 to 5 minutes. You may
then send the configuration on for configuration help, or use in your
existing ordering processes. If you require "custom" rack configuration
or configuration for products not available in SCE, please contact HP's
Customer Business Center or an Authorized Partner for assistance. https://www.hp.com/products/configurator
|
Service and Support
Service and Support
|
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires
a service partner who understands your increasingly complex business technology
environment. That's why it makes sense to team up with the people who
know HP infrastructure hardware and software best - the experienced professionals
at HP Services.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack services offer complete care and support expertise with committed
response choices designed to meet your IT and business needs.
HP Foundation Care services offer scalable reactive support-packages
for HP industry-standard servers and software. You can choose the type
and level of service that is most suitable for your IT and business needs.
HP Proactive Care delivers high levels of system availability through
proactive service management and advanced technical response.
|
|
Recommended HP Care Pack Services
for your HP product
|
Optimized Care
|
3-Year HP 6 hour Call to Repair Response, Proactive Care
Combined reactive and proactive support for hardware and software helping
optimize your systems and delivering high levels of availability through
proactive service management and advanced technical response. Hardware
problem resolution to return the hardware in operating condition within
6 hours of the initial service request. A Technical Account Manager, as
your single point of contact, will own your call or issue end to end until
resolved.
https://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP Install c-Class Server Blade Service
This easy-to-buy, easy-to-use HP Care Pack service helps ensure that your
new HP hardware is installed smoothly, efficiently, and with minimal disruption
of your IT and business operations.
|
|
Standard Care
|
3-Year HP 24x7 4 hour response, Proactive Care Service
This service gives you combined reactive and proactive support including
rapid access to our Advanced Solution Center to manage and prevent problems
and a Technical Support Specialist with a broad level of technical knowledge
that will engage with additional technical expertise as needed from HP's
vast global resources.
https://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP Install c-Class Server Blade Service
This easy-to-buy, easy-to-use HP Care Pack service helps ensure that your
new HP hardware is installed smoothly, efficiently, and with minimal disruption
of your IT and business operations
|
|
Related Services
|
HP Proactive Care Personalized Support - Environmental Option
The Personalized Support option provides an assigned Account Support Manager
who can bring best practices from across the industry plus extra technical
skills to your IT team. This option is only available as an add-on to
HP Proactive Care Support.
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical
services. You can buy Proactive Select Service Credits when you purchase
your hardware and then use the credits over the next 12 months. https://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf
Additional HP Care Pack services can be found at: https://www.hp.com/go/cpc
|
|
Insight Online/Insight Remote
Support
|
HP Insight Remote Support provides 24 X 7 remote monitoring, proactive
notifications, and problem resolution. This comes at no additional cost
with your HP solution. Learn more about Insight Remote Support https://www.hp.com/go/insightremotesupport
and Insight Online https://www.hp.com/go/insightonline
NOTE: Insight Remote Support is a prerequisite
for Proactive Care. All blades within a single HP BladeSystem enclosure
must be at the same service level.
|
|
HP Support Center
|
Personalized online support portal with access to information, tools
and experts to support HP business products. Submit support cases online,
chat with HP experts, access support resources or collaborate with peers.
Learn more https://www.hp.com/go/hpsc
HP's Support Center Mobile App allows you to resolve issues yourself
or quickly connect to an agent for live support. Now, you can get access
to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional
cost with a HP warranty, HP Care Pack or HP contractual support agreement.
NOTE: HP Support Center Mobile
App is subject to local availability.
|
Parts and Materials
|
HP will provide HP-supported replacement parts and materials necessary
to maintain the
covered hardware product in operating condition, including parts and materials
for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime
and/or the
maximum usage limitations as set forth in the manufacturer's operating
manual, product
quick-specs, or the technical product data sheet will not be provided,
repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to
Disk or eligible SSD/Flash Drives replaced by HP due to malfunction.
|
For more information
|
To learn more on HP ProLiant servers and HP BladeSystem servers, please
contact your HP sales representative or HP Authorized ServiceOne Channel
Partner. Or visit: www.hp.com/services/bladesystem
|
Pre-configured Models
NOTE: For the Standard Features shipped in
the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
NOTE: Pre-configured
models ship with the configurations below. Options can be selected from the Core
or Additional options section of this QuickSpecs.
NOTE: HP does not
allow factory integration of options into pre-configured models. Any additional
options purchased will be shipped separately.
NOTE: If you desire a
custom configuration please see "Configuration Information - Factory Integrated
Models" section of this QuickSpecs.
NOTE: Not all Pre-configured
Models are available in all regions. Check with your local country HP offices
for availability.
|
Performance
Models
|
HP ProLiant BL660c Gen8 E5-4650 4P 128GB-R Server
679114-B21
|
Processor(s)
|
Four
(4) Intel® Xeon® E5-4650 (2.7GHz/8-core/20MB/130W)
|
Cache
Memory
|
20MB Level 3 cache
|
Memory
|
128GB
(16x 8GB) PC3-12800R (DDR3-1600) Registered DIMMs at 1.5V
NOTE:
Total of 32 DIMM slots.
|
Network
Controller
|
Two (2) HP FlexFabric
10Gb 2-port 554FLB FlexibleLOMs
|
Storage
Controller
|
HP Smart Array P220i
Controller with 512MB FBWC and RAID 0, 1
|
Hard
Drive
|
None ship standard; includes
2 SFF hard drive blanks
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD
drives
|
Internal Storage
|
SAS:
2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 1.6TB
|
Optical
Drive Bay
|
None
|
Expansion Slots
|
3
standard - Slot 1 supports Type A mezzanine Cards. Slots 2 and 3 support Type
A and Type B mezzanine cards.
|
Management
|
HP
iLO Management Engine (standard)
Optional: HP iLO Scale-Out or HP Insight
Control
|
Form Factor
|
Up
to four (4) full-height server blades supported in the HP BladeSystem c3000 Enclosure
Up to eight (8) full-height server blades supported in HP BladeSystem c7000 Enclosure
|
Warranty
|
Server
warranty includes 3 year parts, 3 year labor, 3-year on-site support.
|
|
HP ProLiant
BL660c Gen8 E5-4620 4P 128GB-R Server
679115-B21
|
Processor(s)
|
Four
(4) Intel® Xeon® E5-4620 (2.2GHz/8-core/16MB/95W)
|
Cache
Memory
|
16MB Level 3 cache
|
Memory
|
128GB
(16x 8GB) PC3L-10600R (DDR3-1333) Registered DIMMs at 1.35V
NOTE:
Total of 32 DIMM slots.
|
Network
Controller
|
Two (2) HP FlexFabric
10Gb 2-port 554FLB FlexibleLOMs
|
Storage
Controller
|
HP Smart Array P220i
Controller with 512MB FBWC and RAID 0, 1
|
Hard
Drive
|
None ship standard;
includes 2 SFF hard drive blanks
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD
drives
|
Internal
Storage
|
SAS: 2.4TB; SATA: 2.0TB;
SAS SSD: 1.6TB; SATA SSD: 1.6TB
|
Optical
Drive Bay
|
None
|
Expansion Slots
|
3
standard - Slot 1 supports Type A mezzanine Cards. Slots 2 and 3 support Type
A and Type B mezzanine cards.
|
Management
|
HP
iLO Management Engine (standard)
Optional: HP iLO Scale-Out or HP Insight
Control
|
Form Factor
|
Up
to four (4) full-height server blades supported in the HP BladeSystem c3000 Enclosure
Up to eight (8) full-height server blades supported in HP BladeSystem c7000 Enclosure
|
Warranty
|
Server
warranty includes 3 year parts, 3 year labor, 3-year on-site support.
|
|
HP ProLiant
BL660c Gen8 E5-4617 4P 128GB-R Server
679116-B21
|
Processor(s)
|
Four
(4) Intel® Xeon® E5-4617 (2.9GHz/6-core/15MB/130W)
|
Cache
Memory
|
15MB Level 3 cache
|
Memory
|
128GB
(16x 8GB) PC3-12800R (DDR3-1600) Registered DIMMs at 1.5V
NOTE:
Total of 32 DIMM slots.
|
Network
Controller
|
Two (2) HP FlexFabric
10Gb 2-port 554FLB FlexibleLOMs
|
Storage
Controller
|
HP Smart Array P220i
Controller with 512MB FBWC and RAID 0, 1
|
Hard
Drive
|
None ship standard; includes
2 SFF hard drive blanks
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD
drives
|
Internal Storage
|
SAS:
2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 1.6TB
|
Optical
Drive Bay
|
None
|
Expansion Slots
|
3
standard - Slot 1 supports Type A mezzanine Cards. Slots 2 and 3 support Type
A and Type B mezzanine cards.
|
Management
|
HP
iLO Management Engine (standard)
Optional: HP iLO Scale-Out or HP Insight
Control
|
Form Factor
|
Up
to four (4) full-height server blades supported in the HP BladeSystem c3000 Enclosure
Up to eight (8) full-height server blades supported in HP BladeSystem c7000 Enclosure
|
Warranty
|
Server
warranty includes 3 year parts, 3 year labor, 3-year on-site support.
|
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model or configure-to-order (CTO) server. To ensure
only valid configurations are ordered, HP recommends the use of an HP
approved configurator. Contact your local sales representative for information
on CTO product offerings and requirements.
NOTE: Configure-to-order server blades must start with a CTO Blade
Server
NOTE: FIO indicates that this option is only available as a factory
installable option.
NOTE: All CTO (Configure to Order) systems will be populated with
sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
|
Step
1: Base Server Blade Configuration (Select a configurable Blade)
|
Models
|
HP ProLiant BL660c
Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
|
679118-B21
|
Each configurable
model ships with:
|
|
Two (2) FlexibleLOM connectors providing a choice of supported FlexibleLOMs
(see Step 2)
One (1) embedded HP Smart Array P220i Controller with RAID 0, 1
Optional HP Smart Array P220i Controller 512MB FBWC (listed in step 4)
Two (2) HP small form factor hot-plug SAS/SATA/SSD hard drive bays
Three (3) PCIe Gen 3.0 I/O expansion slots (one x8 Type A, two x16 Type
B)
One (1) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HP iLO Management Engine (standard)
|
|
|
Step
2: Choose Required Options (one of the following from each list unless otherwise
noted)
|
HP
Processors
|
NOTE:
The BL660c Gen8 supports two or four processors; one and three processor
configurations are not supported.
NOTE: All processor kits contain
two (2) processors.
NOTE: If four processors are desired, select one
2P xxxxxx-L21 processor kit here in Step 2 and one xxxxxx-B21 2P processor kit
in Step 3.
NOTE: All processors within the server must be identical.
NOTE: The processor model as well as the memory configuration determines
the maximum speed memory can operate. Please see the see the "Memory"
section later in this document.
|
|
Eight-Core
Processors
|
|
HP
BL660c Gen8 Intel® Xeon® E5-4650 (2.7GHz/8-core/20MB/130W) FIO 2-processor
Kit
|
679098-L21
|
HP
BL660c Gen8 Intel® Xeon® E5-4650L (2.6GHz/8-core/20MB/115W) FIO 2-processor
Kit
|
679110-L21
|
HP
BL660c Gen8 Intel® Xeon® E5-4640 (2.4GHz/8-core/20MB/95W) FIO 2-processor
Kit
|
679100-L21
|
HP
BL660c Gen8 Intel® Xeon® E5-4620 (2.2GHz/8-core/16MB/95W) FIO 2-processor
Kit
|
679102-L21
|
Six-Core Processors
|
|
HP BL660c Gen8 Intel®
Xeon® E5-4617 (2.9GHz/6-core/15MB/130W) FIO 2-processor Kit
|
679112-L21
|
HP BL660c Gen8 Intel®
Xeon® E5-4610 (2.4GHz/6-core/15MB/95W) FIO 2-processor Kit
|
679104-L21
|
HP BL660c Gen8 Intel®
Xeon® E5-4607 (2.2GHz/6-core/12MB/95W) FIO 2-processor Kit
|
679106-L21
|
Four-Core Processors
|
|
HP BL660c Gen8 Intel®
Xeon® E5-4603 (2.0GHz/4-core/10MB/95W) FIO 2-processor Kit
|
679108-L21
|
HP
Memory
|
NOTE:
HP memory from previous generation servers are not qualified or warranted
with this HP ProLiant Server.
NOTE:
HP SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document. For additional information,
please see the HP SmartMemory QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMMs and RDIMMs are all distinct memory technologies and cannot
be mixed within a server.
NOTE: A minimum of one DIMM is required per
processor.
NOTE: Depending on the memory configuration and processor
model, 1600MHz and 1333MHz memory may operate at a lower speed. Please see the
see the "Memory" section later in this document and the Online Memory
Configuration Tool for details at www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory"
section later in this document.
|
|
HP SmartMemory
|
|
Load Reduced
DIMMs (LRDIMMs)
|
|
HP 32GB (1x32GB)
Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low Voltage Memory Kit
|
647903-B21
|
Registered DIMMs
(RDIMMs)
|
|
HP 4GB (1x4GB) Single
Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory Kit
|
647893-B21
|
HP 4GB (1x4GB) Single
Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
|
647895-B21
|
HP 8GB
(1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory
Kit
|
647897-B21
|
HP 8GB
(1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
|
647899-B21
|
HP 8GB (1x8GB) Dual
Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
|
690802-B21
|
HP 16GB
(1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory
Kit
|
647901-B21
|
HP 16GB (1x16GB)
Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
|
672631-B21
|
HP 24 GB (1x24GB)
Three Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory
Kit
NOTE: When HP 24GB (1x24GB) Three
Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits are
used, all 32 DIMM slots on the BL660c Gen8 must be fully populated with these
24GB DIMMs.
|
716324-B21
|
HP
Networking
|
FlexibleLOM
Adapters
|
|
NOTE:
The ProLiant BL660c Gen8 supports one or two FlexibleLOMs.
NOTE: For
a single FlexibleLOM Factory Integrated Model configuration, select the option
here in the "Step 2" HP Networking section.
NOTE: For a
two FlexibleLOM Factory Integrated Model configuration, the second FlexibleLOM
is a different part number. When two FlexibleLOMs are needed you must select the
first FlexibleLOM here in the "Step 2" HP Networking section and the
second FlexibleLOM from "Step 4" HP Networking section.
NOTE:
All FlexibleLOMs are dual port: one port is routed to interconnect module bay
1 and the other to bay 2.
|
|
10GbE Ethernet
FlexibleLOMs
|
|
HP Flex-10 10Gb 2-port 530FLB FIO Adapter
NOTE: For a two FlexibleLOM configuration, the HP Flex-10 10Gb 2-port 530FLB
FIO Adapter may be configured with the HP Flex-10 10Gb 2-port 530FLB Adapter (656590-B21)
or the HP 10Gb 2-port 560FLB Adapter (655639-B21).
|
684211-B21
|
HP
FlexFabric 10Gb 2-port 534FLB FIO Adapter
NOTE:
For a two FlexibleLOM configuration, the HP FlexFabric 10Gb 2-port 534FLB FIO
Adapter may be configured with the HP FlexFabric 10Gb 2-port 534FLB Adapter (700741-B21).
|
700742-B21
|
HP FlexFabric 10Gb
2-port 554FLB FIO Adapter
NOTE: For
a two FlexibleLOM configuration, the HP FlexFabric 10Gb 2-port 554FLB FIO Adapter
may be configured with the HP FlexFabric 10Gb 2-port 554FLB Adapter (647586-B21)
or the HP 10Gb 2-port 560FLB Adapter (655639-B21).
|
684212-B21
|
HP
Ethernet 10Gb 2-port 560FLB FIO Adapter
NOTE: For a two FlexibleLOM
configuration, the HP 10Gb 2-port 560FLB FIO Adapter may be configured with the
HP 10Gb 2-port 560FLB Adapter (655639-B21).
|
684214-B21
|
HP
Storage Controllers
|
Optional
Upgrades
|
|
HP
512MB FBWC for BL660c FIO Kit
|
694033-B21
|
NOTE:
Please see the Smart Array Advanced Pack 2.0 QuickSpecs for Technical Specifications
and additional information at https://h18000.www1.hp.com/products/quickspecs/13200_na/13200_na.html.
(Smart Array Advanced Pack)
|
|
|
Step
3: Choose Additional Factory Integration Options
|
HP
Insight Software
|
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single
Server FIO License
|
C6N36A
|
HP
Storage Blades
|
HP
D2220sb Configure-to-order Storage Blade
NOTE:
The ProLiant BL660c Gen8 supports up to two expansion blades (Ultrium Tape Blade(s),
HP D2200sb/D2220sb Storage Blade(s), and/or PCI Expansion Blade(s) that directly
connect to the server via the enclosure midplane
NOTE: Please see the
QuickSpecs for technical specifications and additional information at https://h18006.www1.hp.com/storage/bladesystem/index.html
|
QW918A
|
|
Step
4: Choose Additional Options for Factory Integration
|
NOTE: For additional options, including server blade enclosures interconnect,
mezzanine options and power subsystem options; please see the Core Options and
Additional sections below; or the following:
|
Core Options
HP
Networking
|
10Gb Ethernet Mezzanines
|
|
NOTE: All 10Gb
Ethernet adapters are Type A mezzanine cards that can be installed in any of the
BL660c Gen8 mezzanine slots.
NOTE: Each 10 Gigabit Ethernet adapter
requires a minimum of 2GB of server memory.
NOTE: A 10 Gigabit Ethernet
adapter supports linking at 1Gbps or 10Gbps when connected to an interconnect
module with 10Gb Ethernet downlinks.
NOTE: A 10 Gigabit Ethernet adapter
supports linking at only 1Gbps when connected to an interconnect module with 1Gb
Ethernet downlinks.
NOTE: The 10 Gigabit Ethernet adapters on each
server blade connect to a 10Gb interconnect in bays 3-6 (HP BladeSystem c7000
Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).
|
|
HP
Ethernet 10Gb 2-port 560M Adapter
NOTE:
Please see QuickSpecs for technical specifications and additional information
at: https://h18004.www1.hp.com/products/quickspecs/14478_na/14478_na.html.
|
665246-B21
|
HP FlexFabric 10Gb 2-port 554M
Adapter
NOTE: Please see QuickSpecs
for technical specifications and additional information at: https://h18000.www1.hp.com/products/quickspecs/14221_na/14221_na.html.
|
647590-B21
|
HP Flex-10 10Gb 2-port 552M Adapter
NOTE: Please see QuickSpecs for technical
specifications and additional information at: https://h18000.www1.hp.com/products/quickspecs/14218_na/14218_na.html.
|
674764-B21
|
HP FlexFabric 10Gb 2-port 534M
Adapter
NOTE: Please see QuickSpecs
for technical specifications and additional information at: https://h18000.www1.hp.com/products/quickspecs/14617_na/14617_na.html
|
700748-B21
|
HP
Flex-10 10Gb 2-port 530M Adapter
NOTE:
Please see QuickSpecs for technical specifications and additional information
at: https://h18000.www1.hp.com/products/quickspecs/14217_na/14217_na.html.
|
631884-B21
|
1Gb Ethernet Mezzanines
|
|
NOTE:
All 1Gb Ethernet adapters are Type A mezzanine cards that can be installed
in any of the BL660c Gen8 mezzanine slots.
|
|
HP Ethernet 1Gb 4-port 366M Adapter
|
615729-B21
|
10Gb Ethernet FlexibleLOM
Adapters
|
|
NOTE:
The server supports one or two FlexibleLOMs.
NOTE: For Pre-configured
Model configurations, two FlexibleLOMs are already included; no additional FlexibeLOMs
are added.
NOTE: For a Factory Integrated Model configuration with
one FlexibleLOM, it is added in the HP Networking section of "Step 2"
in the Factory Integrated Models section earlier in this document; it is not added
here.
NOTE: For a Factory Integrated Model configuration with two
FlexibleLOMs, the second FlexibleLOM is a different part number. You must select
the first FlexibleLOM earlier in this document in the "Step 2" HP Networking
section and select the second FlexibleLOM here in the "Step 4" HP Networking
section.
NOTE: The FlexibleLOMs here can also be used change the FlexibleLOM(s)
that original came with the server.
NOTE: All FlexibleLOMs are dual
port: one port is routed to interconnect module bay 1 and the other to bay 2.
|
|
HP Flex-10 10Gb 2-port 530FLB Adapter
|
656590-B21
|
NOTE:
Please see QuickSpecs for technical specifications and additional information
at: https://h18000.www1.hp.com/products/quickspecs/14216_na/14216_na.html.
|
|
HP
FlexFabric 10Gb 2-port 534FLB Adapter
NOTE:
Please see QuickSpecs for technical specifications and additional information
at: https://h18000.www1.hp.com/products/quickspecs/14617_na/14617_na.html
|
700741-B21
|
HP FlexFabric 10Gb 2-port 554FLB
Adapter
|
647586-B21
|
NOTE:
Please see QuickSpecs for technical specifications and additional information
at: https://h18000.www1.hp.com/products/quickspecs/14219_na/14219_na.html.
|
|
HP Ethernet 10Gb 2-port 560FLB
Adapter
|
655639-B21
|
NOTE: Please
see QuickSpecs for technical specifications and additional information at: https://h18000.www1.hp.com/products/quickspecs/14331_na/14331_na.html.
|
|
1Gb Ethernet FlexibleLOM Adapters
|
|
NOTE:
The server supports one or two FlexibleLOMs. Two are already included in
the Pre-configured Models and the first one is added per Step 2 for Factory Integrated
Models. The 1GbE FlexibleLOM option below is used to change the original 10Gb
FlexibleLOM(s) that originally came with the server.
NOTE: For a two
FlexibleLOM configuration, the two FlexibleLOMs must be identical.
|
|
HP Ethernet 1Gb 2-port 361FLB Adapter
NOTE: Please see QuickSpecs for technical
specifications and additional information at: https://h18000.www1.hp.com/products/quickspecs/14333_na/14333_na.html
|
652500-B21
|
|
HP Processors
|
NOTE:
The BL660c Gen8 supports two or four processors; one and three processor
configurations are not supported.
NOTE: All processor kits contain two (2) processors.
NOTE: All processors within the server must be identical.
NOTE: The processor model as well as the memory configuration determines
the maximum speed memory can operate. Please see the see the "Memory"
section later in this document.
|
|
Eight-Core Processors
|
|
HP BL660c Gen8 Intel® Xeon®
E5-4650 (2.7GHz/8-core/20MB/130W) 2-processor Kit
|
679098-B21
|
HP BL660c Gen8 Intel® Xeon®
E5-4650L (2.6GHz/8-core/20MB/115W) 2-processor Kit
|
679110-B21
|
HP BL660c Gen8 Intel® Xeon®
E5-4640 (2.4GHz/8-core/20MB/95W) 2-processor Kit
|
679100-B21
|
HP BL660c Gen8 Intel® Xeon®
E5-4620 (2.2GHz/8-core/16MB/95W) 2-processor Kit
|
679102-B21
|
Six-Core Processors
|
|
HP BL660c Gen8 Intel® Xeon®
E5-4617 (2.9GHz/6-core/15MB/130W) 2-processor Kit
|
679112-B21
|
HP BL660c Gen8 Intel® Xeon®
E5-4610 (2.4GHz/6-core/15MB/95W) 2-processor Kit
|
679104-B21
|
HP BL660c Gen8 Intel® Xeon®
E5-4607 (2.2GHz/6-core/12MB/95W) 2-processor Kit
|
679106-B21
|
Four-Core Processors
|
|
HP BL660c Gen8 Intel® Xeon®
E5-4603 (2.0GHz/4-core/10MB/95W) 2-processor Kit
|
679108-B21
|
|
HP Memory
|
NOTE:
HP memory from previous generation servers are not qualified or warranted
with this HP ProLiant Server. HP SmartMemory is required to realize the
memory performance improvements and enhanced functionality listed in this
document. For additional information, please see the HP SmartMemory QuickSpecs
at: https://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMMs and RDIMMs are all distinct memory technologies and
cannot be mixed within a server.
NOTE: A minimum of one DIMM is required per processor.
NOTE: For additional memory rules and guidelines, see the "Memory"
section later in this document.
|
|
HP SmartMemory
|
|
Load Reduced DIMMs (LRDIMMs)
|
|
HP 32GB (1x32GB) Quad Rank x4
PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low Voltage Memory Kit
|
647903-B21
|
Registered DIMMs (RDIMMs)
|
|
HP 4GB (1x4GB) Single Rank x4
PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory Kit
|
647893-B21
|
HP 4GB (1x4GB) Single Rank x4
PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
|
647895-B21
|
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R
(DDR3-1333) Registered CAS-9 Low Voltage Memory Kit
|
647897-B21
|
HP 8GB (1x8GB) Single Rank x4
PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
|
647899-B21
|
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R
(DDR3-1600) Registered CAS-11 Memory Kit
|
690802-B21
|
HP 16GB (1x16GB) Dual Rank x4
PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory Kit
|
647901-B21
|
HP 16GB (1x16GB) Dual Rank x4
PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
|
672631-B21
|
HP 24 GB (1x24GB) Three Rank x4
PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kit
NOTE: When HP 24GB (1x24GB) Three
Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory
Kits are used, all 32 DIMM slots on the BL660c Gen8 must be fully populated
with these 24GB DIMMs.
|
716324-B21
|
|
HP
Hard Drives
|
NOTE:
The ProLiant BL660c Gen8 server includes the new HP hot-plug small form factor
(SFF) SmartDrive carrier for enhanced management and reduced maintenance errors.
HP drives from previous generation servers are not compatible with the BL660c
Gen8 drive bays.
NOTE: HP hard drives have either a one year or three
year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE:
The hard drive options are not required when configuring a drive-less model.
NOTE: The mixing of standard SAS drives with SAS SSD drives is supported
within the server, but limits the RAID configuration to two separate RAID 0 volumes.
Mixing of other drives types is not supported.
|
|
HP SAS Hot Plug SmartDrive Carriers
for Gen8 Servers only
|
|
SAS Hot Plug with SmartDrive
SFF (2.5-inch) Enterprise Drives
|
|
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch)
SC Enterprise 3yr Warranty Hard Drive
|
697574-B21
|
HP 900GB 6G SAS 10K rpm SFF (2.5-inch)
SC Enterprise 3yr Warranty Hard Drive
|
652589-B21
|
HP 600GB 6G SAS 10K rpm SFF (2.5-inch)
SC Enterprise 3yr Warranty Hard Drive
|
652583-B21
|
HP 450GB 6G SAS 10K rpm SFF (2.5-inch)
SC Enterprise 3yr Warranty Hard Drive
|
652572-B21
|
HP 300GB 6G SAS 10K rpm SFF (2.5-inch)
SC Enterprise 3yr Warranty Hard Drive
|
652564-B21
|
HP 300GB 6G SAS 15K rpm SFF (2.5-inch)
SC Enterprise 3yr Warranty Hard Drive
|
652611-B21
|
HP 146GB 6G SAS 15K rpm SFF (2.5-inch)
SC Enterprise 3yr Warranty Hard Drive
|
652605-B21
|
SAS Hot Plug SmartDrive SFF
(2.5-inch) Midline Drives
|
|
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch)
SC Midline 1yr Warranty Hard Drive
|
652749-B21
|
HP 500GB 6G SAS 7.2K rpm SFF
(2.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE:
Please see QuickSpecs for technical specifications and additional information
at https://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html.
|
652745-B21
|
6G SATA Hot Plug with SmartDrive
SFF (2.5-inch) Midline (MDL) Drives
|
|
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch)
SC Midline 1yr Warranty Hard Drive
|
655710-B21
|
HP 500GB 6G SATA 7.2K rpm SFF
(2.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for technical specifications and additional
information at
https://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html.
|
655708-B21
|
6G
SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
|
|
HP
120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
NOTE: This drive supports Gen8
servers only.
|
717965-B21
|
HP
80GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
|
734360-B21
|
6G
SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
|
|
HP
800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
NOTE: This drive supports Gen8
servers only.
|
717973-B21
|
HP
480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
NOTE: This drive supports Gen8
servers only.
|
717971-B21
|
HP
240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
NOTE: This drive supports Gen8
servers only.
|
717969-B21
|
NOTE:
Please see the QuickSpecs for technical specifications and information at:
https://h18000.www1.hp.com/products/quickspecs/14038_na/14038_na.html.
|
|
3G SATA MLC Hot Plug SFF (2.5-inch)
Enterprise Mainstream Solid State Drives
|
|
HP 400GB 3G SATA MLC SFF (2.5-inch)
SC Enterprise Mainstream 3yr Warranty Solid State Drive
|
653120-B21
|
HP 200GB 3G SATA MLC SFF (2.5-inch)
SC Enterprise Mainstream 3yr Warranty Solid State Drive
|
653118-B21
|
HP 100GB 3G SATA MLC SFF (2.5-inch)
SC Enterprise Mainstream 3yr Warranty Solid State Drive
|
653112-B21
|
6G
SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Boot Solid State
Drives
|
|
HP
600GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
|
739898-B21
|
HP
300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
|
739888-B21
|
6G SATA ME Hot Plug SFF (2.5-inch)
Enterprise Mainstream Solid State Drives
|
|
HP 800GB 6G SATA Mainstream Endurance
SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive
|
691868-B21
|
HP 400GB 6G SATA Mainstream Endurance
SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive
|
691866-B21
|
HP 200GB 6G SATA Mainstream Endurance
SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive
|
691864-B21
|
HP 100GB 6G SATA Mainstream Endurance
SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive
|
691862-B21
|
6G SAS ME Hot Plug SFF (2.5-inch)
Enterprise Mainstream Solid State Drives
|
|
HP 800GB 6G SAS Mainstream Endurance
SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive
|
690829-B21
|
HP 400GB 6G SAS Mainstream Endurance
SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive
|
690827-B21
|
HP 200GB 6G SAS Mainstream Endurance
SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive
|
690825-B21
|
6G SAS SLC Hot Plug SFF (2.5-inch)
Enterprise Performance Solid State Drives
|
|
HP 400GB 6G SAS SLC SFF (2.5-inch)
SC Enterprise Performance 3yr Warranty Solid State Drive
|
653082-B21
|
HP 200GB 6G SAS SLC SFF (2.5-inch)
SC Enterprise Performance 3yr Warranty Solid State Drive
NOTE:
Please see the QuickSpecs for technical specifications and information at
https://h18000.www1.hp.com/products/quickspecs/14038_na/14038_na.html.
|
653078-B21
|
Additional Options
HP Insight Software
|
HP
Insight Control
|
|
HP Insight Control
including 1yr 24x7 Technical Support and Updates Single Server License
|
C6N27A
|
HP Insight
Control including 1yr 24x7 Technical Support and Updates Electronic License
|
C6N28ABE
|
HP Insight Control
including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO Electronic License
|
C6N36ABE
|
HP Insight Control Server Provisioning Media Kit
|
BD883A
|
HP Insight Management
Media Kit
|
C6N31A
|
NOTE:
HP Insight Management Media Kit contains DVDs without licenses. Contains HP
Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment,
and Virtual Connect Enterprise Manager software. Uses an integrated installer
to perform quick and accurate software installation and updates.
NOTE:
HP Insight Control 7.2 introduces Insight Control server provisioning, a new
capability ideal for multi-server OS and firmware provisioning to ProLiant and
BladeSystem servers. Insight Control server provisioning is included and licensed
as part of HP Insight Control. A media kit, "HP Insight Control server provisioning
USB media kit" (# BD883A), including a USB, is available for customers who
require a physical copy of the media loaded with Insight Control server provisioning
software. Please note that this media kit is separate and in addition to the "HP
Insight Management DVD media kit" (#C6N31A).
|
|
NOTE:
Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single activation key.
NOTE: Customer will receive
a license entitlement certificate. The license entitlement certificate must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE:
Licenses ship without media. The HP Insight Management Media Kit can be ordered
separately, or can be downloaded at: https://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the Insight Control QuickSpecs
at: https://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
|
|
HP Insight Control
server deployment
|
|
HP Insight Control
Server Deployment including 1yr 24x7 Support Electronic License
|
T9082AAE
|
HP Insight Control
Server Deployment including 1yr 24x7 Support Single Server License
|
452151-B21
|
NOTE:
Licenses ship without media. The HP Insight Management Media Kit can be ordered
separately, or can be downloaded at https://www.hp.com/go/insightupdates.
NOTE: Customer will receive a license entitlement certificate, which must
be redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
|
|
NOTE:
For additional license kits please see the Insight Control QuickSpecs at https://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html.
|
|
|
HP
iLO Advanced License
|
HP Integrated
Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote Management
|
|
HP iLO Advanced Blade including
3yr 24x7 Tech Support and Updates Electronic License
|
E6U63ABE
|
HP iLO Advanced Blade 1 Server
License with 3yr 24x7 Tech Support and Updates
|
BD502A
|
HP iLO Advanced for BladeSystem
including 1yr 24x7 Tech Support and Updates Electronic License
|
E6U60ABE
|
HP iLO Advanced for BladeSystem
including 1yr 24x7 Support Single Server License
|
512488-B21
|
HP iLO Advanced for BladeSystem
including 1yr 24x7 Support Eight Server License
|
512489-B21
|
HP Integrated Lights-Out (iLO)
|
|
HP iLO Scale Out
|
|
HP Integrated Lights-Out Scale-Out
3yr 24x7 Tech Support and Updates Flex Quantity License
|
BD776A
|
HP Integrated Lights-Out Scale-Out
1yr 24x7 Tech Support and Updates Flex Quantity License
|
BD778A
|
HP Integrated Lights-Out Scale-Out
including 3yr 24x7 Tech Support and Updates Flex Qty E-LTU
|
BD776AAE
|
HP Integrated Lights-Out Scale-Out
including 1yr 24x7 Tech Support and Updates Flex Qty E-LTU
|
BD778AAE
|
HP Integrated Lights-Out Scale-Out
including 3yr 24x7 Tech Support and Updates Tracking License
|
BD777A
|
HP Integrated Lights-Out Scale-Out
including 1yr 24x7 Tech Support and Updates Tracking License
|
BD779A
|
NOTE: Customer
will receive a license entitlement certificate, which must be redeemed online
or via fax in order to obtain the license activation key(s). Includes one or three
years of 24 x 7 HP Software Technical Support Service.
NOTE: For additional
license kits, including electronic delivery options, please see the iLO QuickSpecs
at https://www.hp.com/go/iLO
|
|
|
High Performance Clusters
|
HP
Cluster Management Utility
|
|
HP Insight Cluster
Management Utility 1yr 24x7 Flexible License
|
QL803B
|
HP Insight Cluster
Management Utility 3yr 24x7 Flexible License
NOTE:
These part numbers can be used to purchase one certificate for multiple licenses
and support with a single activation key. Each license is for one node (server).
Customer will receive a printed end user license agreement and license entitlement
certificate via physical shipment. The license entitlement certificate must be
redeemed online in order to obtain a license key. Customer also will receive a
support agreement.
|
BD476A
|
HP Insight Cluster
Management Utility Media
NOTE: For
additional license kits please see the QuickSpecs at https://h18004.www1.hp.com/products/quickspecs/12612_na/12612_na.html.
|
BD477A
|
|
HP I/O Accelerator Options
|
NOTE:
The HP I/O Accelerator Options are Type B mezzanine cards that can be
installed in BL660c Gen8 mezzanine slots 2 and 3.
|
|
HP 1.2TB Multi Level
Cell IO Accelerator for BladeSystem c-Class
|
QK763A
|
HP 785GB Multi Level
Cell IO Accelerator for BladeSystem c-Class
|
QK762A
|
HP 365GB Multi Level
Cell IO Accelerator for BladeSystem c-Class
|
QK761A
|
|
HP Security
|
HP Trusted Platform
Module Option
|
488069-B21
|
NOTE:
The TPM (Trusted Platform Module) is a microcontroller chip that can securely
store artifacts used to authenticate the server platform. These artifacts
can include passwords, certificates and encryption keys. Windows® BitLocker™
Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities
of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker
to help protect user data and to ensure that a server running Windows Server
2008 has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go
to https://www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition
required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must
be retained. Misplacing or losing the key could result in data loss.
|
|
|
HP Storage Controller
|
HP Smart
Array P731m Controller
NOTE: The HP
Smart Array P731m Controller is a Type B mezzanine card that can be installed
in BL660c Gen8 mezzanine slots 2 and 3.
NOTE: The BL660 has three installation
locations for the "capacitor pack" that comes with the FBWC on Smart
Array controllers. The first install location is for the embedded Smart Array
P220i Controller. The second install location is for an optional Smart Array controller
Type A or B mezzanine card with FBWC installed in mezzanine slot 3. The third
install location is for an optional Smart Array controller mezzanine card with
FBWC installed in either mezzanine slot 1 (Type A only) or slot 2 (Type A or B).
|
|
HP Smart Array P731m/2GB FBWC
6Gb 4-ports Ext Mezzanine SAS Controller
|
698535-B21
|
HP Smart Array P721m Controller
NOTE:
The HP Smart Array P721m Controller is a Type B mezzanine card that can be installed
in BL660c Gen8 mezzanine slots 2 and 3.
NOTE: The BL660 has three installation
locations for the "capacitor pack" that comes with the FBWC on Smart
Array controllers. The first install location is for the embedded Smart Array
P220i Controller. The second install location is for an optional Smart Array controller
Type A or B mezzanine card with FBWC installed in mezzanine slot 3. The third
install location is for an optional Smart Array controller mezzanine card with
FBWC installed in either mezzanine slot 1 (Type A only) or slot 2 (Type A or B).
|
|
HP
Smart Array P721m/2G FBWC 4-ports Ext Mezzanine SAS Controller
|
650072-B21
|
HP
Smart Array P721m/512 4-ports Ext Mezzanine SAS Controller
|
655636-B21
|
NOTE:
For additional information, please see the HP BladeSystem c7000 Enclosure and
InfiniBand QuickSpecs at::
https://h18000.www1.hp.com/products/quickspecs/14626_na/14626_na.html.
(Smart
Array P731m Controller)
https://h18000.www1.hp.com/products/quickspecs/14404_na/14404_na.html.
(Smart
Array P721M Controller)
|
|
|
HP
InfiniBand Mezzanines
|
NOTE:
When an InfiniBand adapter is installed in mezzanine slot 1, only one port is
active (regardless of operating mode). When installed in any other mezzanine slot,
both ports are active.
NOTE: InfiniBand QDR and FDR speeds are only
supported on the HP BladeSystem c7000 Enclosure. For additional information, please
see the HP BladeSystem c7000 Enclosure and InfiniBand QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/12586_na/12586_na.html
https://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html
|
|
HP Infiniband QDR/Ethernet 10Gb 2-port
544M Adapter
NOTE: The QDR InfiniBand
adapter may be installed in any mezzanine slot of the server.
|
644160-B21
|
HP Infiniband FDR/Ethernet 10Gb/40Gb
2-port 544M Adapter
NOTE: The FDR InfiniBand
adapter must be installed in mezzanine slot 1 for FDR mode and may be installed
in any mezzanine slot if operated in any other mode.
|
644161-B22
|
|
HP
Ultrium Tape Blades
|
NOTE:
The ProLiant BL660c Gen8 supports up to two expansion blades (Ultrium Tape Blade(s),
HP D2200sb/D2220sb Storage Blade(s), and/or PCI Expansion Blade(s) ) that directly
connect to the server via the enclosure midplane.
NOTE: For the above
Ultrium tape drives, please see the QuickSpecs for technical specifications and
additional information at: https://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
|
|
HP
StoreEver LTO-4 Ultrium SB1760c Tape Blade
NOTE:
LTO-4 Ultrium tape technology.
|
AQ697B
|
HP
StoreEver LTO-5 Ultrium SB3000c Tape Blade
NOTE:
LTO-5 Ultrium tape technology.
|
BS580B
|
|
HP
Storage Blades
|
NOTE:
The ProLiant BL660c Gen8 supports up to two expansion blades (Ultrium Tape Blade(s),
HP D2200sb/D2220sb Storage Blade(s), and/or PCI Expansion Blade(s) that directly
connect to the server via the enclosure midplane
NOTE: Please see the
QuickSpecs for technical specifications and additional information at: https://h18006.www1.hp.com/storage/bladesystem/index.html
|
|
HP
D2200sb PCIe Storage Blade
|
AP880A
|
HP
D2220sb PCIe and StoreVirtual VSA Bundle with SAAP License
|
QW914A
|
HP
D2220sb PCIe w/(12) 900 GB 6G SAS HDD Bundle with SAAP License
|
QW915A
|
HP
D2220sb Build-to-order Storage Blade
|
QW917A
|
NOTE:
For additional information, please see the QuickSpecs for technical specifications
and additional information at: https://h18000.www1.hp.com/products/quickspecs/14507_na/14507_na.html
|
|
|
HP
Expansion Blade
|
HP BLc PCI
Expansion Blade
NOTE: The PCI Expansion
Blade provides PCI card slots for an adjacent c-Class Server Blade.
NOTE:
The ProLiant BL660c Gen8 supports up to two expansion blades (Ultrium Tape
Blade(s), HP D2200sb/D2220sb Storage Blade(s), and/or PCI Expansion Blade(s) that
directly connect to the server via the enclosure midplane.
NOTE: The
PCI Expansion Blade ships with one pre-installed PCI-X connect board. Also includes
one PCIe connect board which requires installation.
NOTE: Please see
the QuickSpecs for technical specifications and additional information at https://h18000.www1.hp.com/products/quickspecs/12753_na/12753_na.html
|
448018-B21
|
|
HP
Flash Media Kits for USB Drives
|
HP
Flash Media Kits for USB Drives
|
|
HP 2GB USB Flash Media Drive
Key Kit
NOTE: HP qualified blank USB
key for use with HP ProLiant servers that support the VMware virtualization environment.
HP value-add software like SmartStart. HP recommends this industry standard USB
flash device for use with VMware ESXi. USB device must be installed in the internal
slot of the ProLiant server for use with VMware ESXi. Refer to HP VMware Getting
Started Guide for installation instructions.
|
608447-B21
|
HP
Enterprise Performance Flash Media Kits for Memory Cards
|
|
HP 4GB microSD Enterprise Performance
Flash Media Kit
NOTE: The USB flash
media and Secure Digital cards are for integrated hypervisor virtualization environments
needing a low cost boot solution with the highest performance and reliability.
Learn more at https://h18004.www1.hp.com/products/servers/options/flash_drives.html.
|
647444-B21
|
HP
Enterprise Mainstream Flash Media Kits for Memory Cards
|
|
HP
8GB microSD Enterprise Mainstream Flash Media Kit
|
726116-B21
|
HP
32GB microSD Enterprise Mainstream Flash Media Kit
|
700139-B21
|
|
HP
Care Pack Services
|
Proactive
Care
- Collaborative Support plus Proactive
services delivered by the on shore/near shore Advanced Solution Center (ASC) and
backed by the global delivery organization, end-to-end case ownership from a Technical
Solution Specialists and Technical Account Manager who remotely delivers firmware/software
revision management, proactive scans and incident trend reports. Recommended for
customers running a virtualized infrastructure and/or customers who desire an
enhanced call support experience.
|
|
HP
3 year 4 hour 24x7 ProLiant BL6xxc Proactive Care Service
|
U3B32E
|
HP 3 year 4 hour 24x7 with Defective
Media Retention ProLiant BL6xxc Proactive Care Service
|
U3B35E
|
HP 3 year 6 hour Call To Repair
24x7 ProLiant BL6xxc Proactive Care Service
|
U3B38E
|
HP 3 year 6hr Call To Repair
24x7 with Defective Media Retention ProLiant BL6xxc Proactive Care SVC
|
U3B41E
|
Proactive Care Personalized
Support Environmental Option - to add an onsite Account Support Manager (ASM)
to Proactive Care. ASM is an assigned resource who delivers support planning and
brings technical expertise and best practices advice for the customer's environment.
|
|
HP 3 year ISS ProactiveCare
Personalized Support
|
U6W98E
|
Installation
Services - reduce the time required to get your system up and running and
help minimize disruptions to your business.
|
|
HP Install c-Class
Server Blade Service
|
UE493E
|
HP Hardware Installation
during Non Standard Hours c-Class Enclosure and Server Blade Service
|
UG869E
|
Additional HP Care Pack services
can be found at: https://www.hp.com/go/cpc
|
|
Memory
For detailed memory configuration rules and guidelines, please use the
Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Memory Subsystem Architecture
Each Intel® Xeon® E5-4600 family processor socket contains four
memory channels that support two DIMMs each for a total of eight (8) DIMM
per installed processor or a grand total of thirty-two (32) DIMMs for
the server. Up to 32GB capacity DIMMs are supported for 1.0TB of memory
(32 DIMM slots x 32GB per DIMM).
Memory Population Rules and Guidelines:
- A minimum of one DIMM is required per processor.
- Install DIMMs only if the corresponding processor is installed.
- DIMM slots attached to each processor socket are only available if
a processor is installed in that socket.
- DIMM sizes can be mixed in channel. To maximize performance, it is
recommended to balance the total memory capacity between all installed
processors and to load the channels similarly whenever possible.
- RDIMMs operating at either 1.35V or 1.5V may be mixed in any order,
but the system will power them at the higher voltage.
- LRDIMMs and RDIMMs are distinct memory technologies and cannot be
mixed within a server.
- DIMMs of different speeds may be mixed in any order; the server will
select a common optimal speed.
- The maximum memory speed is a function of the memory type, memory
configuration, and processor model.
- The maximum memory capacity is a function of the memory type and number
of installed processors.
- HP memory from previous generation servers is not compatible with
the BL660c Gen8 Server Blade.
- When HP 24GB (1x24GB) Three Rank x4 PC3L-10600R
(DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits are used, all
32 DIMM slots on the BL660c Gen8 must be fully populated with these 24GB
DIMMs.
- To realize the performance memory capabilities listed in this document,
HP SmartMemory is required. For additional information, please see the
HP SmartMemory QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html.
- For memory population rules and additional memory guidelines, please
see the BL660c Gen8 user guide at https://www.hp.com/support.
|
|
BL660c
Gen8 Supported Memory Bandwidth
|
DIMM
Type
|
Registered
DIMMS (RDIMMs)
|
|
Load
Reduced (LRDIMMs)
|
DIMM
Rank
|
Single
Rank
(1R)
|
Dual
Rank
(2R)
|
Three
Rank (3R)
|
Quad
Rank
(4R)
|
DIMM
Capacity
|
4GB
|
4GB
|
8GB
|
8GB
|
8GB
|
16GB
|
16GB
|
24GB
|
32GB
|
DIMM Native Speed (MHz)
|
1333
|
1600
|
1600
|
1333
|
1600
|
1333
|
1600
|
1333
|
1333
|
Voltage*
|
LV
|
Std
|
Std
|
LV
|
Std
|
LV
|
Std
|
LV
|
LV
|
* LV=
low voltage at 1.35V; Std = standard voltage at 1.5V.
|
|
Slots
That Can Be Populated
|
32
|
32
|
32
|
32
|
32
|
32
|
32
|
32
|
32
|
|
Maximum Capacity (GB)
|
128
|
128
|
256
|
256
|
256
|
512
|
512
|
768
|
1024
|
|
Populated DIMM Speed (MHz)
|
1 DIMM Per Channel
|
1333
|
1600
|
1600
|
1333
|
1600
|
1333
|
1600
|
N/A
|
1333
|
2 DIMM Per Channel
|
1333
**
|
1600
|
1600
|
1333
**
|
1600
|
1333
**
|
1600
|
1333
|
1333
**
|
**
Using HP SmartMemory, 1333MHz DIMMs operate at 1.35V for 2 DIMMs per channel (2DPC).
Third party 1333MHz DIMM memory may only support 1.5V at 2DPC.
NOTE:
Memory speed is a function of the processor QPI bus speed; see the table below
"Memory Speed by Processor Model".
|
|
|
Memory Speed by Processor
Model
|
Processor Models
|
Supported Memory Speeds
|
E5-4650, E5-4650L, E5-4640, E5-4617
|
1600/1333/1066MHz
|
E5-4620, E5-4617, E5-4610, E5-4607
|
1333/1066MHz
|
E5-4603, E5-4607
|
1066MHz
|
|
Standard and Maximum
Memory Capacity (Pre-configured Models)
|
Pre Configured Models
|
Standard Memory
|
Maximum Memory Plus Optional Memory
|
Standard Memory Replaced with Optional Memory
|
Intel Xeon E5-4650, E5-4620, and E5-4617
|
128GB
(16x 8GB)
|
384GB
(16x 8GB + 16x 16GB)
|
1024GB
(32x 32GB)
|
NOTE: Capacity references are
rounded to the common gigabyte (GB) values.
-
4GB = 4,096MB
-
8GB = 8,192MB
-
16GB = 16,384MB
-
24GB = 24,576MB
-
32GB = 32,768MB
|
|
Memory options part number decoder
|
|
Following are memory
options available from HP:
|
HP Memory
|
NOTE:
HP memory from previous generation servers are not qualified or warranted
with this HP ProLiant Server. HP SmartMemory is required to realize the
memory performance improvements and enhanced functionality listed in this
document for Gen8. For additional information, please see the HP SmartMemory
QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies
and cannot be mixed within a server. The majority of ProLiant Gen8 servers
support RDIMM, UDIMM and LRDIMM.
NOTE: A minimum of one DIMM is required per server.
NOTE: For additional memory rules and guidelines, see the "Memory"
section later in this document.
|
|
HP SmartMemory
|
|
Load Reduced DIMMs (LRDIMMs)
|
|
HP 32GB (1x32GB) Quad Rank x4
PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low Voltage Memory Kit
|
647903-B21
|
Registered DIMMs (RDIMMs)
|
|
HP 4GB (1x4GB) Single Rank x4
PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory Kit
|
647893-B21
|
HP 4GB (1x4GB) Single Rank x4
PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
|
647895-B21
|
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R
(DDR3-1333) Registered CAS-9 Low Voltage Memory Kit
|
647897-B21
|
HP 8GB (1x8GB) Single Rank x4
PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
|
647899-B21
|
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R
(DDR3-1600) Registered CAS-11 Memory Kit
|
690802-B21
|
HP 16GB (1x16GB) Dual Rank x4
PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory Kit
|
647901-B21
|
HP 16GB (1x16GB) Dual Rank x4
PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
|
672631-B21
|
HP 24 GB (1x24GB) Three Rank x4
PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kit
|
716324-B21
|
NOTE: Depending
on the memory configuration and processor model, 1600MHz and 1333MHz memory
may operate at a lower speed. Please see the see the "Memory"
section later in this document and the Online Memory Configuration Tool
for details at www.hp.com/go/ddr3memory-configurator.
|
|
Storage
|
1-2
|
2 x SFF hot-plug SAS, SATA, SAS
SDD; and SATA SSD hard drives
|
|
Hard Drives
NOTE: The ProLiant BL660c
Gen8 server includes the new HP hot-plug small form factor (SFF) SmartDrive carrier
for enhanced management and reduced maintenance errors. HP drives from previous
generation servers are not compatible with the BL660c Gen8 drive bays.
NOTE:
Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: The hard drive options are
not required when configuring a drive-less model.
NOTE: The mixing
of standard SAS drives with SAS SSD drives is supported within the server, but
limits the RAID configuration to two separate RAID 0 volumes. Mixing of other
drives types is not supported.
|
SAS
Hot Plug SmartDrive SFF (2.5-inch) Enterprise Drives
|
|
Quantity
Supported
|
Position
Supported
|
Controller
|
1.2TB 6G SAS 10K
900GB 6G
SAS 10K
600GB 6G SAS 10K
450GB 6G SAS 10K
300GB 6G SAS 10K
300GB
6G SAS 15K
146GB 6G SAS 15K
|
2
|
1-2
|
HP
Smart Array P220i Controller
|
|
SAS Hot Plug SmartDrive SFF
(2.5-inch) Midline Drives
|
|
Quantity
Supported
|
Position
Supported
|
Controller
|
1TB 6G SAS 7.2K
500GB 6G
SAS 7.2K
|
2
|
1-2
|
HP
Smart Array P220i Controller
|
|
6G SATA Hot Plug with SmartDrive
SFF (2.5-inch) Midline Drives
|
|
Quantity
Supported
|
Position
Supported
|
Controller
|
1TB 6G SAS 7.2K
500GB 6G
SAS 7.2K
|
2
|
1-2
|
HP
Smart Array P220i Controller
|
|
6G
SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
|
|
Quantity
Supported
|
Position
Supported
|
Controller
|
120GB
6G SATA VE Boot
|
2
|
1-2
|
HP
Smart Array P220i Controller
|
|
6G SATA VE Hot Plug SFF (2.5-inch)
Enterprise Value Solid State Drives
|
|
Quantity
Supported
|
Position
Supported
|
Controller
|
800GB 6G SATA VE
480GB 6G SATA
VE
240GB 6G SATA VE
|
2
|
1-2
|
HP
Smart Array P220i Controller
|
|
3G
SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
|
|
Quantity
Supported
|
Position
Supported
|
Controller
|
400GB
3G SATA MLC
200GB 3G SATA MLC
100GB 3G SATA MLC
|
2
|
1-2
|
HP
Smart Array P220i Controller
|
|
6G
SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Boot Solid State
Drives
|
|
Quantity
Supported
|
Position
Supported
|
Controller
|
600GB
6G SATA VE Boot
300GB 6G SATA VE Boot
|
2
|
1-2
|
HP
Smart Array P220i Controller
|
|
6G SATA ME Hot Plug SFF (2.5-inch)
Enterprise Mainstream Solid State Drives
|
|
Quantity
Supported
|
Position
Supported
|
Controller
|
800GB 6G SATA ME
400GB 6G
SATA ME
200GB 6G SATA ME
100GB 6G SATA ME
|
2
|
1-2
|
HP
Smart Array P220i Controller
|
|
|
|
|
6G SAS ME Hot Plug SFF (2.5-inch)
Enterprise Mainstream Solid State Drives
|
|
Quantity
Supported
|
Position
Supported
|
Controller
|
800GB 6G SAS ME
400GB 6G
SAS ME
200GB 6G SAS ME
|
2
|
1-2
|
HP
Smart Array P220i Controller
|
|
6G SAS SLC Hot Plug SFF (2.5-inch)
Enterprise Performance Solid State Drives
|
|
Quantity
Supported
|
Position
Supported
|
Controller
|
400GB 6G SAS SLC
200GB 6G
SAS SLC
|
2
|
1-2
|
HP
Smart Array P220i Controller
|
|
Technical Specifications
System Unit
|
Dimensions
(H x W x D)
(with bezel)
|
366.27mm
(14.42") x 56.54mm (2.23") x 516.67mm (20.34")
|
Weight
(approximate)
|
Maximum:
4 processors, 2 FlexibleLOMs, 32 DIMMs, 2 hard drives, 3 mezzanine cards, and
2 flash cache batteries installed
|
27.1
lb (12.3 kg)
|
Minimum:
2 processors, 1 FlexibleLOM, and 2 DIMMs installed
|
20.2
lb (9.2 kg)
|
Power Specifications
|
For power specifications including input requirements, BTU rating, and power
supply output, please see the:
To review typical system power ratings use the HP Power
Advisor which is available via the online tool located at www.hp.com/go/hppoweradvisor.
|
System Inlet Temperature
|
Operating
|
10°
to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
per every 305 m (1.8°F per every 1,000 ft) above sea level to a maximum of
3,050 m (10,000 ft), no direct sustained sunlight.
Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number
of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
|
Non-operating
|
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr
(36°F/hr).
|
Relative
Humidity
(non-condensing)
|
Operating
|
10
to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature,
non-condensing.
|
Non-operating
|
5
to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature,
non-condensing.
|
Altitude
|
Operating
|
3,050
m (10,000 ft). This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1,500 ft/min).
|
Non-operating
|
9,144
m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1,500 ft/min).
|
Acoustic
Noise
|
For acoustic
noise specifications, please see the HP BladeSystem c-Class Enclosures QuickSpecs
located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html
|
|
HP Smart Array P220i
Controller
|
Disk Drive Interface
|
6G SAS (Serial Attached SCSI)
|
Server Interface
|
x4 PCI Express host interface
|
Cache Memory Speed
|
512MB flash backed write cache (FBWC)
cache standard with Pre-configured Models and optional on Factory Integrated
Models
|
Logical Drives Supported
|
64 (with included 512MB cache)
|
Host Memory Addressing
|
64-bit, supporting servers memory
space greater than 4GB
|
RAID Support
|
RAID 1 (mirroring) and RAID 0 (striping)
NOTE: The FBWC is not required for
RAID capability. The purpose of the cache is it can increase hard drive
write performance and provides data protection in case the server losses
power.
|
Other
|
Upgradeable firmware with recovery
ROM
Online drive flash (with SAS drives)
|
|
HP FlexFabric 10Gb
2-port 554FLB FlexibleLOM
(Included with Pre-configured Models)
|
Type
|
Integrated dual-port KR 10Gb FlexibleLOM
with FlexFabric (Flex-10, FCoE, hardware-based iSCSI, iSCSI boot, TCP/IP
offload engine, and autosencing 1Gb/10Gb Ethernet capability)
|
Network Processor
|
Emulex BE3
|
Data Transfer Method
|
x8 PCI Express 2.0
|
Network Transfer Rate
|
Two ports, each at 20Gbps full
duplex; 40Gbps aggregate full duplex theoretical bandwidth
NOTE: Each port is autosensing 1Gb/10Gb,
and can interoperate with 1Gb or 10Gb HP BladeSystem c-Class interconnect
components. Both ports will operate at the same speed.
NOTE: Each port on the 554FLB adapter transmits from the server at
20Gbps (theoretical) full duplex.
|
IEEE Compliance
|
802.1p, 802.1q, 802.1qau, 802.3ad,
802.3ae, 802.3ap (10GBase-KX4) and 802.3x
|
Standard Features
|
ProLiant Teaming including Network Fault Tolerance, Transmit Load Balancing,
and Switch-Assisted Load Balancing
9K Jumbo frames (4K Jumbo frames when in FCoE mode)
Microsoft Windows Receive Side Scaling (RSS)
Hardware-based accelerated iSCSI
iSCSI boot
Flex-10 capability
Fibre Channel over Ethernet (FCoE)
TCP/IP offload engine (stateless TCP/IP)
Autosencing 1Gb/10Gb Ethernet
|
|
Environment-friendly Products and
Approach
|
End-of-life Management and Recycling
|
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to: https://www.hp.com/go/green.
To recycle your product, please go to: https://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: https://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
|
|
|