|
DL QuickSpecs
|
DL20
|
|
DL60
|
|
DL80
|
|
DL120
|
|
DL140
|
|
DL145
|
|
DL160
|
|
DL160se
|
|
DL165
|
|
DL180
|
|
DL185
|
|
DL320
|
|
DL325
|
|
DL345
|
|
DL360
|
|
DL365
|
|
DL380
|
|
DL385
|
|
DL388
|
|
DL560
|
|
DL580
|
|
DL585
|
|
DL740
|
|
DL760
|
|
DL785
|
|
DL1000
|
|
|
ML QuickSpecs
|
ML30
|
|
ML110
|
|
ML115
|
|
ML150
|
|
ML310
|
|
ML330
|
|
ML350
|
|
ML370
|
|
ML530
|
|
ML570
|
|
ML750
|
|
|
BL QuickSpecs
|
BL10e
|
|
BL20p
|
|
BL25p
|
|
BL260c
|
|
BL280c
|
|
BL2x220c
|
|
BL30p
|
|
BL35p
|
|
BL40p
|
|
BL420c
|
|
BL45p
|
|
BL460c
|
|
BL465c
|
|
BL480c
|
|
BL495c
|
|
BL60p
|
|
BL620c
|
|
BL660c
|
|
BL680c
|
|
BL685c
|
|
BL860c
|
|
|
SL QuickSpecs
|
SL160z
|
|
SL165z
|
|
SL170s
|
|
SL170z
|
|
SL230s
|
|
SL250s
|
|
SL270s
|
|
SL2x170z
|
|
SL335s
|
|
SL390s
|
|
SL4540
|
|
SL4545
|
|
|
XL QuickSpecs
|
XL170r
|
|
XL190r
|
|
XL220a
|
|
XL230a
|
|
XL730f
|
|
XL740f
|
|
XL750f
|
|
|
CL QuickSpecs
|
CL1850
|
CL1850 G1
| |
CL380
|
CL380 G1
| |
|
|
|
|
|
|
|
Proliant DL140 G2 QuickSpecs |
US QuickSpecs |
|
|
|
|
|
|
|
|
|
Proliant DL140 G2 Overview
HP ProLiant DL140 Generation 2 (G2)
|
1. 500W power supply |
2. Full-height, full length 133 MHz PCI-X expansion
slot which supports PCI-Express with optional riser board |
3. Low-profile, half-length 133 MHz PCI-X expansion
slot |
4. Memory DIMM slots |
5. Intel Xeon Processors (Supports up to 2) |
6. System fans |
|
7. Power on/off
|
8. USB port
|
9. System LEDs |
10. Optional CD- or DVD-ROM drive |
11. Two Non-Hot Plug SATA OR SCSI
1" Hard Drive Bays |
12. Access panel |
|
|
|
At
A Glance |
- Processors:
- Supports 1 or 2 Intel Xeon processors:
- 2.8 GHz 2MB Level 2 Cache 800MHz front-side bus supporting
Hyper-Threading Technology
- 3.4 GHz 2MB Level 2 Cache 800MHz front-side bus supporting
Hyper-Threading Technology
- 3.6 GHz 2MB Level 2 Cache 800MHz front-side bus supporting
Hyper-Threading Technology
- Intel Chipset is E7520
- Memory:
- 8 DIMM slots, supporting up 16GB DDR2-400MHz memory
- 1 GB of PC2-3200 DDR2 SDRAM running at 400MHz with Advanced ECC
capabilities standard, expandable to 16 GB
- Storage Controller:
- Serial ATA (SATA) models offer SATA controller in the chipset
- SCSI models will have SCSI controller in a slot (occupies low-profile
slot)
- Internal Drive Support:
- Support for up to two SATA/SCSI non-hot plug hard drives
- Internal storage capacity of up to 1TB (2 x 500GB non-hot plug
SATA HDDs), or 292GB (2x146GB NHP SCSI HDDs)
- Network Controller:
- Two integrated Dual Broadcom 10/100/1000 5721 NICs (Wake on LAN
and PXE capable)
- Integrated 10/100 NIC dedicated for server management
- Expansion Slots:
- Two PCI-X 64-bit/133MHz PCI slots operating at 3.3 volts (one
full-length, one low-profile)
- Includes one full-length, full-height and one low-profile, half-length
64-bit/133MHz PCI-X slot; Optional PCI Express x8 on full-length,
full-height slot
- USB Ports:
- Four USB ports (two rear, two front)
- Optical Drives:
- Optional DVD or CD-ROM drive
- Power Supply:
- 500W Power Supply (Non-Hot Plug, autoswitching)
- Form Factor:
- Management:
- ROM Setup Utility
- HP ProLiant Lights Out 100i Remote Management support standard
- IPMI 2.0 support
- Warranty:
- Protected by HP Services, including a one-year, limited warranty,
Parts only 1 year limited Global warranty - Certain restrictions
and exclusions apply.
|
Standard Features
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section. |
Processor
One of the following depending on Model |
Intel Xeon 2.8 GHz/800Mhz -
2MB L2 |
Intel Xeon 3.4 GHz/800MHz -
2MB L2 |
Intel Xeon 3.6 GHz/800MHz -
2MB L2 |
|
Cache Memory
(Depending on Model)
|
2MB Level 2 cache memory |
|
Upgradeability
|
Upgradeable to dual processing |
|
Chipset
|
Intel Chipset E7520 with 800MHz
Front Side Bus |
|
Memory Protection
|
Advanced ECC capabilities |
|
Memory
|
Type |
PC2-3200 DDR2 SDRAM running
at 400MHz |
Standard |
1 GB (2 x 512 MB) |
(2 x 512
MB) |
Maximum |
16 GB (8 x 2 GB) |
(8 x 2
GB) |
|
Network
Controller |
Integrated Dual Broadcom 5721
10/100/1000 NICs (Wake on LAN and PXE capable) |
|
Expansion Slots
|
Slot Number
|
Bus Speed
|
Bus Number*
|
Device Number**
|
Hot Plug
(Y/N)
|
PCI Voltage
|
Notes
|
1
|
64-bit/133MHz PCI-X
|
1
|
0
|
N
|
3.3 volts
|
Full length, full height
|
1
|
X8 PCI Express
|
5
|
1
|
N
|
3.3 volts
|
Full length, full height
|
2
|
64-bit/133MHz PCI-X
|
6
|
3
|
N
|
3.3 volts
|
Low-profile
|
NOTE: For more information
regarding PCI-X, please see the following URL: https://www.HP.com/pci-x. |
NOTE: All slots can accept
universal keyed PCI cards |
* Default bus assignment. Inserting
cards with PCI bridges may alter the actual bus assignment number. |
** Slots are enumerated differently
based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting
with the lowest bus). |
|
Storage
Controller |
Serial ATA (SATA) models offer
SATA controller in the chipset; SCSI models will have SCSI controller in
a slot (occupies low-profile slot) |
|
Storage |
Diskette Drives |
via USB only |
DVD-ROM |
8x IDE (ATAPI) DVD-ROM
drive, slim (optional) |
CD-ROM |
24x IDE (ATAPI)
CD-ROM drive (optional) |
Hard Drives |
Non-Hot Plug SATA |
80GB 7,200 rpm Hard Drive |
Non-Hot Plug SCSI |
36GB 15,000 rpm Hard Drive |
|
Maximum Internal
Storage |
Non-Hot Plug SATA
|
1TB
|
2 x 500GB |
Non-Hot Plug SCSI |
292GB |
2 x 146GB |
|
Interfaces |
Parallel |
None |
Network RJ-45 (Ethernet) |
1-Dedicated for HP ProLiant
Lights Out 100i Remote Management |
Serial |
1 |
Pointing Device (Mouse) |
1 |
Graphics |
1 |
Keyboard |
1 |
USB |
4 (two front, two rear)
NOTE: Please see the following URL
for additional information regarding USB support:
https://h18004.www1.hp.com/products/servers/platforms/usb-support.html. |
Network RJ-45 (Ethernet) |
2 |
|
Graphics |
Integrated ATI RAGE XL Video
Controller with 8MB SDRAM Video Memory |
|
Form
Factor |
Rack Mount (1U) |
|
ProLiant Essentials
Foundation Pack Software |
Optional ProLiant
Essentials Value Packs |
Optional software offerings
that selectively extend the functionality of an Adaptive Infrastructure
to address specific business problems and needs: |
- Intelligent Networking Pack - detects and analyzes network bottlenecks
or broken network linkages and steers traffic to the optimum route based
on network conditions, plus it provides an extra layer of protection.
The virus throttle feature of the solution slows the propagation of
fast spreading virus.
- Vulnerability and Patch Management Pack - identifies and remediates
software security vulnerabilities due to missing patches as well operating
system configurations that can be exploited by viruses, worms, and other
blended threats.
|
NOTE: Flexible
and volume quantity license kits are available for ProLiant Essentials Value
Packs. Refer to https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for
more information.
NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: https://www.hp.com/servers/proliantessentials. |
|
Industry Standard
Compliance |
ACPI V2.0 Compliant |
PCI 2.2 Compliant |
PXE Support |
WOL Support |
Microsoft® Logo certifications |
IPMI 2.0 Compliant |
|
Manageability |
HP ProLiant Lights Out 100i
Remote Management standard |
|
Security |
Power-on password |
Setup password |
|
Server Power Cords |
One Highline IEC Power cord
ships standard (for connection to a Power Distribution Unit) |
NOTE: Rack models
ship standard with an IEC cable.
Localized cables included with geographic specific models in other world
regions. |
|
Power
Supply |
500 Watts, auto-switching, PFC
(Power Factor Correcting) |
|
System
Fans |
6 - Non-hot plug, Non-redundant
system fan shipped standard |
|
OS
Support | Microsoft
Windows® 2000 Server (32-bit) Microsoft Windows 2000 Advanced Server (32-bit)
Microsoft Windows 2003 Standard Edition (32-bit) Microsoft Windows 2003 Enterprise
Edition (32-bit) Microsoft Windows 2003 Web Edition (32-bit) Microsoft
Windows 2003 for Extended Systems Standard Edition (64-bit) Microsoft Windows
2003 for Extended Systems Enterprise Edition (64-bit) Red Hat Linux AS/ES/WS
3.0 and 4.0 (32- and 64-bit) SUSE Linux 8 (32-bit) SUSE Linux 9 (32- and
64-bit) Solaris 10 32/64-bit |
NOTE: For an up-to-date listing of the latest OS support matrix, please
see: https://www.hp.com/go/supportos
NOTE: For an up-to-date listing of the latest drivers available for the
HP ProLiant DL140 G2, please see: https://h18023.www1.hp.com/support/files/server/us/index.html
NOTE: For more complete and up-to-date information on how to buy server
operating systems from HP please visit the OS product site at: https://h18004.www1.hp.com/products/servers/software/OEM.html
NOTE: Drivers may also found on the base media for some Linux
OS's. When configuring your server, please consult your base media driver base,
or visit HP.com at: https://h18023.www1.hp.com/support/files/server/us/index.html |
|
Rack Airflow Requirements |
Rack 10000 series
Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used,
observe the following additional requirements to ensure adequate airflow
and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front
and rear doors, you must allow 5,350 sq cm (830 square inches) of hole
evenly distributed from top to bottom to permit adequate airflow (equivalent
to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side
panels of the rack must be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels
to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
NOTE: For additional information,
refer to the Setup and Installation Guide or the Documentation CD provided
with the server, or to the server documentation located in the Support
section at the following URL: https://h18000.www1.hp.com/products/servers/proliantdl140/index.html
|
|
Telco Rack Support |
Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack
kit and an additional option kit from Rack Solutions.
https://www.racksolutions.com/hp |
|
Factory Express Portfolio for
Servers and Storage |
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple
configuration, racking, installation, complex configuration and design services as well
as individual factory services, such as image loading, asset tagging, and
custom packaging. HP products supported through Factory Express include a wide
array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant
Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000,
VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to https://www.hp.com/go/factory-express.
|
|
Service and Support |
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of resellers and service providers.
Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Additional support may be covered under
the warranty or available for an additional fee. Enhancements to warranty
services are available through HP Care Pack services or customized service
agreements.
NOTE: Server Warranty includes 1 year
Parts only. Additional information regarding worldwide limited warranty
and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server, purchased at the same time or afterward, internal
to the enclosure, as well as 22" and smaller external monitors and
tower UPS options up to 3kVA; these items will be covered at the same
service level and for the same coverage period as the server. Coverage
of UPS Battery is not included, standard warranty terms & conditions
apply. For servers or storage systems installed within a rack, service
also covers all HP qualified rack options installed within the same rack.
HP services provide continuous care and support expertise with committed
response designed to meet your IT and business needs.
To fully capitalizing on your HP ProLiant servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions provides a range of support services designed
to meet the varying needs of business. Whether an SMB or large global
corporation HP has a ProLiant server support offer to help you speedily
deploy and maximize system uptime.
Enhanced Care - Minimum recommended service support offer designed to
ensure customers have access to expert assistance, whenever they need
it.
- Next Business Day on site coverage, 3 Years
Continuance Care - Recommended service, delivering cost-effective support
options designed to extend HP Services committed response and guaranteed
fix times, designed to speed problem identification and resolution.
- 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years
Total Care - Highest HP Support service level recommend to help increase
IT performance and availability with comprehensive, integrated hardware
and software services
- 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years
Deployment Services - HP Installation and Start Up services designed
to take time, risk, and worry out of the deployment of ProLiant servers
- and free customers IT support staff to focus on what they do best, their
business.
- Installation of a ProLiant server as per Data Sheet. To be delivered
on a scheduled basis 8am-5pm, M-F, excl. HP holidays
For a complete listing of service offerings and information visit:
https://www.hp.com/services/proliantservices
https://www.hp.com/go/proliant/carepack
|
HPC Interconnects
NOTE: High
Performance Computing (HPC) interconnect technologies are available for
the DL140 under the Cluster Platform product portfolio. These high-speed
interconnects are fully supported by HP when they are part of these configure
to order clusters. Solutions can be defined with a lot of flexibility with
the help of configuration tools. Please visit the following URL to configure
HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects:
https://www.hp.com/techservers/clusters/ucp/index.html |
|
HPC Interconnect |
InfiniBand
|
PCI-X and PCI-Express adapters |
Gigabit Ethernet
|
Use embedded ports |
Myrinet XP |
PCI-X Rev D and Rev E adapters |
Models
ProLiant
DL140 G2 2.8 GHz Xeon 1GB, 80GB, (1P) NHP SATA 405637-xx1
| Processor | One
(1) Intel Xeon 2.8 GHz processor, 800MHz front-side-bus (Supports up to 2) |
Cache Memory | 2MB
second level ECC cache | Memory | 1
GB PC2-3200 DDR2 SDRAM running at 400MHz, with Advanced ECC capabilities |
Network Controller | Integrated
Dual Broadcom 10/100/1000 NICs (Wake on LAN and PXE capable) | Storage
Controller | Embedded SATA Controller |
Hard Drive |
80GB NHP SATA HDD |
Internal
Storage |
1TB maximum (with optional hard
drive) |
Form
Factor | Rack Mount (1U) |
|
ProLiant DL140
G2 2.8GHz Xeon 1GB, 36GB, (1P) NHP SCSI
405638-xx1 |
Processor |
One (1) Intel Xeon 2.8 GHz processor,
800MHz front-side-bus (Supports up to 2) |
Cache Memory |
2MB second level ECC cache |
Memory |
1 GB PC2-3200 DDR2 SDRAM running
at 400MHz, with Advanced ECC capabilities |
Network Controller |
Integrated Dual Broadcom 10/100/1000
NICs (Wake on LAN and PXE capable) |
Storage Controller |
U320 Single Channel PCI-X controller
(in low profile slot) |
Hard Drive |
36GB NHP SCSI HDD |
Internal Storage |
292GB maximum (with optional
hard drive) |
Form Factor |
Rack Mount (1U) |
|
ProLiant
DL140 G2 3.4 GHz Xeon 1GB, 80GB, (1P) NHP SATA 405639-xx1 | Processor | One
(1) Intel Xeon 3.4 GHz processor, 800MHz front-side-bus (Supports up to 2) |
Cache Memory | 2MB
second level ECC cache | Memory | 1
GB PC2-3200 DDR2 SDRAM running at 400MHz, with Advanced ECC capabilities |
Network Controller | Integrated
Dual Broadcom 10/100/1000 NICs (Wake on LAN and PXE capable) | Storage
Controller | Embedded SATA Controller |
Hard Drive |
80GB NHP SATA HDD |
Internal
Storage |
1TBGB maximum (with optional
hard drive) |
Form
Factor | Rack Mount (1U) |
|
ProLiant
DL140 G2 3.4 GHz Xeon 1GB, 36GB, (1P) NHP SCSI 405640-xx1 | Processor | One
(1) Intel Xeon 3.4 GHz processor, 800MHz front-side-bus (Supports up to 2) |
Cache Memory | 2MB
second level ECC cache | Memory | 1
GB PC2-3200 DDR2 SDRAM running at 400MHz, with Advanced ECC capabilities |
Network Controller | Integrated
Dual Broadcom 10/100/1000 NICs (Wake on LAN and PXE capable) | Storage
Controller | U320 Single Channel
PCI-X controller (in low profile slot) | Hard
Drive |
36GB NHP SCSI HDD |
Internal Storage |
292GB maximum (with optional
hard drive) |
Form
Factor | Rack Mount (1U) |
|
ProLiant
DL140 G2 3.6 GHz Xeon 1GB, 80GB, (1P) NHP SATA 383504-xx1
| Processor | One
(1) Intel Xeon 3.6 GHz processor, 800MHz front-side-bus (Supports up to 2) |
Cache Memory | 2MB
second level ECC cache | Memory | 1
GB PC2-3200 DDR2 SDRAM running at 400MHz, with Advanced ECC capabilities |
Network Controller | Integrated
Dual Broadcom 10/100/1000 NICs (Wake on LAN and PXE capable) | Storage
Controller | Embedded SATA Controller |
Hard Drive |
80GB NHP SATA HDD |
Internal
Storage |
1TB maximum (with optional hard
drive) |
Form
Factor | Rack Mount (1U) |
|
ProLiant
DL140 G2 3.6 GHz Xeon 1GB, 36GB, (1P) NHP SCSI 383503-xx1
| Processor | One
(1) Intel Xeon 3.6 GHz processor, 800MHz front-side-bus (Supports up to 2) |
Cache Memory | 2MB
second level ECC cache | Memory | 1
GB PC2-3200 DDR2 SDRAM running at 400MHz, with Advanced ECC capabilities |
Network Controller | Integrated
Dual Broadcom 10/100/1000 NICs (Wake on LAN and PXE capable) | Storage
Controller | U320 Single Channel
PCI-X controller (in low profile slot) | Hard
Drive |
36GB NHP SCSI HDD |
Internal Storage |
292GB maximum (with optional
hard drive) |
Form
Factor | Rack Mount (1U) |
|
Country Code
Key
|
XX=00
|
NA |
XX=29 |
Japan |
XX=37 |
AP |
XX=42 |
Euro |
XX=AA |
PRC |
Configuration Information - Factory Integrated Models (North America only)
NOTE: For Configure
to Order requirements within EMEA region, please consult local Sales Contact.
NOTE: HP does not allow factory integration of options into standard
models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server
Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
|
|
Step 1: Base Configuration |
|
SATA Model |
HP ProLiant DL140 G2 SATA Rack
Chassis (North America) |
389452-405
|
Factory Integrated Model ships
with: |
|
Integrated Dual Broadcom 10/100/1000
NICs (Wake on LAN and PXE capable) |
|
Embedded SATA Controller |
|
Two available 64-bit/133MHz PCI-X
slots, including one full-length/full height and one low-profile/half height
slot |
|
500 Watt power supply |
|
One Highline IEC Power cord |
|
6 non-hot plug fans |
|
Rack (1U) |
|
SCSI Model |
HP ProLiant DL140 G2 SCSI Rack
Chassis (North America) |
376343-405
|
Factory Integrated Model ships
with: |
|
Integrated Dual Broadcom 10/100/1000
NICs (Wake on LAN and PXE capable) |
|
One available 64-bit/133MHz PCI-X
slot, (full-length/full height) The low-profile/half height slot houses
the SCSI controller. |
|
500 Watt power supply |
|
One Highline IEC Power cord |
|
6 non-hot plug fans |
|
Rack (1U) |
|
NOTE: The
selection of SCSI Model (P/N 376343-405), requires the selection of (1) SCSI
Controller. Please see Step 2 of this section for compatible SCSI Controllers. |
|
|
Base Memory |
1 GB of
Advanced PC2 PC3200 DDR2 SDRAM DIMM
Memory Kit (2 x 512 MB) |
|
2 GB of
Advanced PC2 PC3200 DDR2 SDRAM DIMM
Memory Kit (2 x 1024 MB) |
|
4 GB of
Advanced PC2 PC3200 DDR2 SDRAM DIMM
Memory Kit (2 x 2048 MB) |
|
|
Hard Drive | SATA - Non-Hot Plug | |
HP 80GB 1.5G SATA 7.2K NHP 3.5"
HDD | |
HP 160GB 1.5G SATA 7.2K NHP 3.5"
HDD | |
HP 250GB 1.5G SATA 7.2K NHP 3.5"
HDD | | HP
500GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO* | 404469-B21 |
NOTE: *Factory
Integrated Only | |
U320 SCSI- Non-Hot Plug |
| HP
36GB U320 15K NHP HDD | |
HP 72GB U320 10K NHP HDD |
| HP
146GB U320 10K NHP HDD | |
|
Controllers |
HP Low Profile U320 DL140 G2/DL145
G2 Controller, FIO
|
390402-B21
|
HP 8 Internal Port SAS HBA with
RAID
NOTE: For use with SATA drives only
|
|
HP SATA/SAS 1U Cable Kit
NOTE: For use with SATA drives only
|
|
HP Single Channel U320 SCSI Controller
|
|
HP PL100 SCSI RAID Controller
|
|
NOTE: Must choose
one of the above listed Controllers when selecting the SCSI Model (P/N 376343-405)
in Step 1 of this section |
|
|
Step 3: Choose Additional
Options for Factory Integration |
NOTE:
For additional options, please refer to the "Options" section
below. Some options may not be available for factory integration. Please
contact an HP sales representative for additional information. |
Options
ProLiant Essentials
Licensing and Packaging
|
ProLiant Essentials Intelligent
Networking Pack Windows Edition and Linux Edition |
|
ProLiant Essentials Intelligent
Networking Pack Windows Edition, Single Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
|
372906-B21
|
ProLiant Essentials Intelligent
Networking Pack Linux Edition, Single Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
|
397004-B21
|
NOTE: For additional
ProLiant Intelligent Networking Pack Windows Edition License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12062_div/12062_div.html |
|
NOTE: For additional
ProLiant Intelligent Networking Pack Linux Edition License Kits please see
the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12327_div/12327_div.html |
|
ProLiant Essentials Vulnerability
and Patch Management Pack |
|
ProLiant Essentials Vulnerability
and Patch Management Pack, Single-Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
|
371645-B21
|
NOTE: For additional
ProLiant Vulnerability and Patch Management Pack License Kits, please see
the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12111_div/12111_div.html |
|
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: https://www.hp.com/servers/proliantessentials.
|
|
|
Processor |
Intel Xeon 2.8 GHz/2MB Processor
Option Kit |
405635-B21
|
Intel Xeon 3.4 GHz/2MB Processor
Option Kit |
|
Intel Xeon 3.6 GHz/2MB Processor
Option Kit |
|
|
Memory (DIMMs)
|
1 GB of Advanced PC2 PC3200 DDR2
SDRAM DIMM Memory Kit (2x512 MB) |
|
2 GB of Advanced PC2 PC3200 DDR2
SDRAM DIMM Memory Kit (2x1024 MB) |
|
4 GB of Advanced PC2 PC3200 DDR2
SDRAM DIMM Memory Kit (2x2048 MB)
|
|
|
Hard Drives | SATA - Non-Hot Plug
| |
HP 80GB 1.5G SATA 7.2K NHP 3.5"
HDD | | HP
160GB 1.5G SATA 7.2K NHP 3.5" HDD | | HP
250GB 1.5G SATA 7.2K NHP 3.5" HDD | | NOTE:
When purchasing systems with the 500GB NHP SATA drives, please reference the Configuration
Information section of this QuickSpecs to order via Configuration to Order. | |
U320 SCSI- Non-Hot Plug |
| HP
36GB U320 15K NHP HDD | |
HP 72GB U320 10K NHP HDD |
| HP
146GB U320 10K NHP HDD | |
|
Optical Drives |
DVD-ROM Drive |
|
24x CD-ROM Drive |
349046-B21
|
Multibay II DVD/CD-RW Combo Drive
NOTE: When purchasing the Multibay
II DVD/CD-RW Combo Drive, (P/N PA850A), the USB 2.0 Multibay II Cradle (P/N
PA509A) is required.
|
PA850A
|
USB 2.0 MultiBay II Cradle, External
NOTE: When purchasing the Multibay II DVD/CD-RW
Combo Drive,(P/N 850A), the USB 2.0 Multibay II Cradle,(P/N PA509A) is
required
|
PA509A
|
|
Storage Controllers
and options |
HP U320 Internal SCSI Cable Kit |
385749-B21
|
64-Bit/133-MHz Single Channel
Ultra320 SCSI HBA G2 |
|
HP 8 Internal Port SAS HBA with
RAID
NOTE: For use with SATA drives only
|
|
HP SATA/SAS 1U Cable Kit
NOTE: For use with SATA drives only |
|
HP PL100 SCSI RAID Controller |
|
HP PCI Express Riser Board Kit |
378841-B21
|
|
Communications |
HP NC150T PCI 4-port Gigabit Combo
Switch Adapter |
|
HP NC310F PCI-X 1000SX Gigabit
Server Adapter |
|
HP NC320T PCI Express Gigabit
Server Adapter |
|
HP NC340T PCI-X Quad Port Gigabit
Server Adapter |
|
HP NC360T PCI Express Dual Port
Gigabit Server Adapter |
|
HP NC370F PCI-X Multifunction
1000SX Gigabit Server Adapter |
374193-B22
|
HP NC370T PCI-X Single Multifunction
Gigabit Server Adapter |
|
HP NC510C PCIe 10 Gigabit Server
Adapter |
|
HP NC510F PCIe 10 Gigabit Server
Adapter |
|
HP NC1020 PCI Single Port Gigabit
Server Adapter |
|
HP NC7170 PCI-X Dual Port Gigabit
Server Adapter |
|
HP NC7771 PCI-X Single Port Gigabit
Server Adapter |
|
NOTE: A minimum
of 1 GB of memory is required for NC370x adapters, with a maximum of two
NC370x adapters permitted in a server. |
|
HP 4x Fabric 1m Copper Cable |
376232-B21
|
HP 4x Fabric 3m Copper Cable |
376232-B22
|
HP 4x Fabric 5m Copper Cable |
376232-B23
|
Myrinet-Fiber/PCI-X Interface
(Dual channel Rev. D card) |
360040-B21
|
Myrinet -Fiber/PCI-X Interface,
M3F-PCIXD-2 |
257894-006
|
Myrinet 2XP PCI-X, Fiber F-Series,
2MB NIC |
390456-B21
|
NOTE: For HPC
interconnect adapters please see the HPC Interconnect section of this QuickSpecs. |
|
|
Rack Kits |
1U Cable Management Arm
NOTE: Package contains two cable
management arms
|
365403-B21
|
|
Tape Drives |
NOTE: A separate
SCSI Controller is required for connecting SCSI tape drives to this server. |
|
USB Tape Drives
|
|
HP StorageWorks DAT 24 USB External
Tape Drive (Carbonite)
|
DW070A
|
HP StorageWorks DAT 40 USB External
Tape Drive (Carbonite)
|
DW023A
|
HP StorageWorks DAT 72 USB External
Tape Drive (Carbonite)
|
|
DAT External Tape Drive
|
|
HP StorageWorks DAT 24 SCSI External
Tape Drive (Flint) |
|
HP StorageWorks DAT 40 SCSI External
Tape Drive (Carbon) |
|
HP StorageWorks DAT 72 SCSI External
Tape Drive (Carbon)
|
Q1523B
|
Ultrium External Tape Drive
|
|
HP StorageWorks Ultrium 232 External
Tape Drive, (Carbonite) |
DW065A
|
Rack-Mount Tape Drive |
|
HP StorageWorks 1U Rack-Mount
Kit with one DAT 72 drive (Carbon) |
A7443A
|
1U USB Cable Option Kit
NOTE: Converts a 1U SCSI rack-mount
kit to a USB interface to support the USB tape drives. |
|
NOTE: When attaching
to an external tape drive, autoloader or jukebox, you must also purchase
a HBA
NOTE: For a complete listing of HP tape drive offerings supported
with the DL140 G2, visit https://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html |
|
|
StorageWorks Options |
NOTE:
The following is a list of all Fibre Channel Host Bus Adapters for Windows
and Linux. For detailed compatibility information please see: https://h18006.www1.hp.com/storage/saninfrastructure/hba.html
|
|
HP StorageWorks FC2214 2 Gb, 64-bit/133
MHz PCI-X-to-Fibre HBA |
|
HP StorageWorks FC2214DC 2 Gb,
Dual Port, 64-Bit/133 MHz PCI-X HBA
|
|
HP StorageWorks 2 Gb, Single Channel,
133 MHz PCI-X HBA
|
A7388A
|
HP StorageWorks 2 Gb, Dual Channel,
133 MHz PCI-X HBA
|
A7387A
|
HP StorageWorks FC1143 4Gb PCI-X
2.0 HBA |
AB429A |
HP StorageWorks FC1243 Dual Channel
4Gb PCI-X 2.0 HBA |
AE369A |
HP StorageWorks FC2142SR 4Gb PCI-e
HBA
|
|
HP StorageWorks FC2242SR Dual
Channel 4 Gb PCI-e HBA
|
|
HP StorageWorks FC1142SR 4Gb PCI-e
HBA
|
|
HP StorageWorks FC1242SR Dual
Channel 4 Gb PCI-e HBA
|
|
HP StorageWorks FC2143 4Gb PCI-X
2.0-to Fibre Channel HBA
|
|
HP StorageWorks FC2243 Dual Channel
4Gb PCI-X 2.0 C HBA |
|
|
HP Data Protector
Express Software
|
HP DP Express Backup Server Upgrade
for ProLiant Software |
BB117AP
|
HP DP Express Package for Microsoft
Small Business Server |
BB118AA
|
NOTE: Please see
the HP Data Protector Express QuickSpecs for additional information regarding
the purchase of HP Data Protector Express software: https://h18000.www1.hp.com/products/quickspecs/12337_div/12337_div.html
(Worldwide) |
|
|
NOTE: To obtain
a free licensed copy of HP Data Protector Express for ProLiant edition software,
please visit the "Protect Your Data" link accessible from your
ProLiant server's System Management Homepage (SMH) software (SmartStart
7.5 or later). |
|
|
USB Options |
128MB USB Drive Key |
DQ819B |
256MB USB Drive Key |
DL973B |
HP USB 2-Button Optical Scroll
Mouse (Carbonite/Silver) |
DC172B |
USB 1.44-MB External Diskette
Drive (Carbonite) |
DC141B |
HP USB 04 Standard Keyboard |
DT528A#xxx |
USB 2.0 4-port HUB |
DG954A |
HP 1GB Drive Key II- USB 2.0 Flash
Drive |
AG382AA |
HP 512MB DriveKey II- USB Flash
Drive |
ED516AA |
|
HP KVM Switch Options |
HP 1x4 USB/PS2 KVM Switch, TT
(NA/JPN) |
371301-D71 |
HP 1x4 USB/PS2 KVM Switch, TT
(AU/NZ) |
371301-011 |
HP 1x4 USB/PS2 KVM Switch, TT
(UK) |
371301-031 |
HP 1x4 USB/PS2 KVM Switch, TT
(EU) |
371301-A21 |
HP 1x4 USB/PS2 KVM Switch, RM
(ALL) |
371302-B21 |
HP PS2 KVM Cable with audio, 6',
2-pack |
371730-B21 |
HP USB KVM Cable with audio, 6',
2-pack |
371729-B21 |
NOTE:
For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following
URL: https://www.hp.com/go/kvm
|
|
|
HP Serial Console
Server Options |
HP 16 Port Serial Console Server
(worldwide) |
AF101A |
HP 48 Port Serial Console Server
(worldwide) |
AF102A |
Serial Adapter, RJ45-D89 DCE Female,
1-pack |
AF103A |
Serial Adapter, RJ45-D89 DCE Female,
8-pack |
AF110A |
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: https://www.hp.com/go/kvm
|
|
2x1x16 IP Console Switch with
Virtual Media
|
AF601A |
4x1x16 IP Console Switch with
Virtual Media
|
AF602A |
2x16 Server Console Switch with
Virtual Media
|
AF600A |
PS/2
Virtual Media Interface Adapter, 1 pack
NOTE: Requires PS/2 and one USB port on server. |
AF604A |
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: https://www.hp.com/go/kvm |
|
|
Service and Support
Offerings (HP Care Pack Services)
|
Hardware Services 4-Hour On-site
Service |
|
13-Hour x 5-Day Coverage, 3 Years,
Electronic |
U9509E
|
24-Hour x 7-Day Coverage, 3 Years,
Electronic |
U9510E
|
Hardware Services Next Business
Day On-Site Service |
|
9-Hour x 5-Day Coverage, 3 Years,
Electronic |
U9508E
|
Hardware Services 6-Hour Call
to Repair On-Site Service |
|
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
U9511E
|
Hardware Installation, Electronic |
U9520E
|
NOTE: For more
information, customer/resellers can contact https://www.hp.com/services/carepack |
|
Memory
HP ProLiant DL140
G2 (all models) |
Standard
Memory
1
GB (2 x
512 MB) of PC2-3200 DDR2 SDRAM running at 400MHz, with Advanced ECC
capabilities Memory installed.
Maximum Memory
Up to 16GB memory is available with the optional installation of PC2-3200
Registered ECC DDR SDRAM DIMM Memory kits. Memory
should be installed in pairs and matched for optimum performance. |
NOTE: Chart does not represent all possible memory configurations.
|
Memory |
Slot
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
Standard (1 GB) |
512 MB
|
512 MB
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Maximum (16 GB) |
2 GB
|
2 GB
|
2 GB
|
2 GB
|
2 GB
|
2 GB
|
2 GB
|
2
GB
|
Following are memory options available from HP:
|
|
4096 MB of Advanced ECC PC2-3200 DDR SDRAM DIMM Memory Kit (2 x 2048 MB)
|
343057-B21
|
2048 MB of Advanced ECC PC2-3200 DDR SDRAM DIMM Memory Kit (2 x 1024
MB)
|
343056-B21
|
1024 MB of Advanced ECC PC2-3200
DDR SDRAM DIMM Memory Kit (2 x 512 MB) |
343055-B21 |
Storage
|
1
|
Two 1" Non-hot plug SATA
or SCSI Hard Drive Bays |
2
|
Optional CD- ROM or DVD drive |
3
|
Power On/Off |
Drive Support |
|
Removable Media |
|
Quantity
Supported |
Position
Supported |
Controller |
IDE (ATAPI) CD-ROM Drive |
Up to 1 |
2
|
Integrated IDE (ATAPI) (optional) |
DVD-ROM |
Up to 1 |
2 |
Integrated IDE (ATAPI) (optional) |
|
DL140 G2 Hard Drives | SATA -
Non-Hot Plug | | Quantity
Supported | Position Supported |
Controller | |
| |
|
80GB 7,200 rpm |
Up to 2 | 1 | Embedded
SATA Controller |
160GB 7,200 rpm |
Up to 2 | 1 | Embedded
SATA Controller |
250GB 7,200 rpm |
Up to 2 | 1 | Embedded
SATA Controller |
500GB 7,200 rpm |
Up to 2 | 1 | Embedded
SATA Controller | NOTE:
When purchasing systems with the 500GB NHP SATA drives, please reference the
Configuration Information section of this QuickSpecs to order via Configuration
to Order. | SCSI- Non-Hot
Plug | | | |
| Quantity
Supported | Position Supported |
Controller | | | | |
36GB 15,000 rpm
| Up
to 2 | 1 | Ultra320
Single Channel PCI-X card (in low profile slot) on SCSI models |
72GB 10,000 rpm |
Up
to 2 | 1 | Ultra320
Single Channel PCI-X card (in low profile slot) on SCSI models |
146GB 10,000 rpm |
Up
to 2 | 1 | Ultra320
Single Channel PCI-X card (in low profile slot) on SCSI models |
Power Specifications
Spare
Kit | 389322-001 |
Operational Input Voltage Range (Vrms)
| 90Vac to 264Vac full range |
Frequency Range (Nominal) (Hz) | 47
Hz to 63 Hz | |
|
Nominal Input Voltage (Vrms) |
100
|
115
|
200
|
220
|
230
|
240
|
Max Rated Output Wattage Rating |
500
|
500
|
500
|
500
|
500
|
500
|
Nominal Input Current (A rms) |
6.84
|
5.78
|
3.25
|
2.91
|
2.75
|
2.63
|
Max Rated Input Wattage Rating (Watts) |
684
|
665
|
649
|
641
|
632
|
632
|
Max. Rated VA (Volt-Amp) |
820
|
820
|
820
|
820
|
820
|
820
|
Efficiency (%) |
73
|
75
|
77
|
78
|
79
|
79
|
Power Factor |
1.00
|
1.00
|
.99
|
.98
|
.98
|
.98
|
Leakage Current (mA) |
<3.5
|
<3.5
|
<3.5
|
<3.5
|
<3.5
|
<3.5
|
Maximum Inrush Current (A peak) |
60
|
60
|
60
|
60
|
60
|
60
|
Maximum Inrush Current duration (mS) |
1
|
1
|
1
|
1
|
1
|
1
|
|
System Specifications |
Power
|
ProLiant DL140 G2 Fully Configured |
110V/60Hz |
220V/50Hz |
Fully Loaded System Input Wattage
(W) |
682 |
660 |
Fully Loaded System Input Current
(A rms) |
6.2 |
3.0 |
Fully Loaded System Thermal (BTU-
Hr) |
2327 |
2252 |
Fully Loaded System VA (Volt-Amp) |
682 |
660 |
System Leakage with all power
supplies loaded (mA) |
<3.5 |
<3.5 |
System Inrush Current with all
power supplies loaded (A) |
60 |
60 |
Power cord requirements |
Nema 5-15P to IEC320-C13 |
IEC320-C13 to IEC320-C14 |
**Power shown is for
a fully configured system consisting of (2) CPU, (8) double-sided DIMMs,
(2) HDDs, (1) CD-ROM, and (2) PCI cards. |
Power Cord Part Number-All Countries
|
307348-B21
|
Power Cord - 12' (US) |
307372-001
|
Quickspecs
System Unit |
Dimensions (HxWxD)
(with feet) |
1.70 x 16.78 x 26.75
in (4.32 x 42.62 x 67.95 cm) |
Weight (approximate) |
35 lb (15.87 kg) |
Fully configured |
Input Requirements
(per power supply) |
Range Input Voltage |
90 to 140 VAC/180 to 264 VAC |
Normal Line Voltage |
115 or 230 VAC |
Line Frequency |
47 to 63 Hz |
|
Rated Input Current load |
7.1A at 115VAC, 3.6A
at 230VAC |
BTU Rating |
BTU-Hr |
2371 |
Power Supply Output
Power (per power supply) |
Rated Steady-State Power |
500W |
Maximum Peak Power |
645W |
Temperature Range |
Operating |
50° to 95° F (10°
to 35° C) |
Shipping |
-40° to 140° F (-40°
to 60° C) |
Relative Humidity
(non-condensing)
|
Operating |
10% to 85% |
Non-operating |
10% to 95% |
Acoustic Noise |
Idle (Fixed Disk Drives
Spinning)
|
|
L WAd (BELS)
|
6.31 |
Operating
(Random Seeks to Fixed Disks) |
|
L WAd (BELS)
|
6.32 |
NOTE:
All temperature ratings shown are for sea level. An altitude derating of
1° C per 304.8 m (1.8°F per 1,000 ft) to 3048 m (10,000 ft) is applicable.
No direct sunlight allowed. Upper operating limit is 3,048m (10,000 ft)
or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or
30.3KPa/4.4 psia. System performance may be reduced if operating with a
fan fault or above 30C.
NOTE: Storage maximum humidity of 90% is based on a maximum temperature
of 45° C (113° F).
Altitude maximum for storage corresponds to a pressure minimum of 70 KPa. |
|
Non-Hot Plug SATA Hard
Drives |
80 GB 7.2K
383410-B21 |
Capacity |
80027 MB |
Height |
1.028 in (2.61 cm) |
Width |
4.0 in (10.16 cm) |
Interface |
SATA 150 |
Transfer Rate Synchronous
(Maximum) |
150 MB/s |
Seek Time
(typical reads, including settling) |
Single Track |
0.8 ms |
Average |
9.0 ms |
Full-Stroke |
17.0 ms |
Rotational Speed |
7,200 rpm |
Physical Configuration |
Bytes/Sector |
512 |
Logical Blocks |
160,086,528 |
Operating Temperature |
41° to 131°
F (5° to 55° C) |
|
Non-Hot Plug SCSI Hard
Drives |
36.4-GB 15K
357012-B21 |
Capacity |
36419.2 MB |
Height |
1 in (2.54 cm) |
Width |
4 in (10.16 cm) |
Interface |
Ultra320 SCSI |
Transfer Rate Synchronous
(Maximum) |
320 MB/s |
Seek Time
(typical reads, including settling) |
Single Track |
0.4 ms |
Average |
3.8 ms |
Full-Stroke |
8 ms |
Rotational Speed |
15,000 rpm |
Physical Configuration |
Bytes/Sector |
512 |
Logical Blocks |
71,132,000 |
Operating Temperature |
50° to 95° F
(10° to 35° C) |
|
Integrated Dual Broadcom
10/100/1000 NICs (Wake on LAN and PXE capable) |
Network Interface
Compatibility |
10Base-T/100Base-TX/1000Base-TX |
IEEE 802.3 10Base-T |
IEEE 802.3 1000Base-T |
IEEE 802.3 100Base-TX |
Data Transfer Method |
64-bit, 133MHz PCI(X)1.0 |
Network Transfer
Rate |
10Base-T (Half-Duplex) |
10 Mb/s |
10Base-T (Full-Duplex) |
20 Mb/s |
100Base-TX (Half-Duplex) |
100 Mb/s |
100Base-TX (Full-Duplex) |
200 Mb/s |
1000Base-TX (Half and Full-Duplex) |
2000 Mb/s |
Connector |
RJ-45 |
|
Cable Support |
10Base-T |
Categories 3, 4 or 5 UTP;
up to 328 ft (100 m) |
10/100/1000Base-TX |
Category 5 UTP (2 Pair);
up to 328 ft (100 m) |
|
|