Up to two Quad-Core
or Dual-Core Intel® Xeon® processors or one Uni-Processor Intel®
Xeon®, Intel® Core™2 Duo or Intel® Celeron®
Also, up to two Small form factor (SFF) non-hot plug drives
7.
Six
(6) PC2 5200 Registered (DDR2 667) Memory DIMM slots
4.
Battery
Holder (Future option support)
What's
New
Support for HP
NC522m Dual Port 10GbE Multifunction BL-c Adapter
At
A Glance
This document covers the HP ProLiant BL260c G5 server
blade only. For more information on HP BladeSystems c-Class Enclosures
and HP BladeSystem c-Class Interconnect Components, please see the following
QuickSpecs:
The new HP ProLiant BL260c G5 offers small to mid-market class features
with high performance and reliability without compromising energy efficiency,
density or simplicity
HP ProLiant BL260c G5 server blade includes:
Processor:
Up to two Quad-Core Intel® Xeon® 5400 sequence processors
Up to two Dual-Core Intel® Xeon® 5200 sequence processors
Or one Uni-Processor Intel® Xeon®, Intel® Core™2 Duo
or Intel® Celeron® processor
Intel® 5100 chipset supporting up to a 1333 MHz Front Side
Bus
Memory:
Up to 48 GB of memory (with
8GB DIMMS), supported by (6) slots of PC2-5300 Registered ECC DIMMs
at 667 MHz
Advanced ECC memory support
Internal Drive Support:
Up to 2 small form factor
(SFF) HP Solid State Drives (SSD) For ProLiant Server Blades
Up to 2 small form factor (SFF) SATA Non-Hot Plug
hard disk drives
Storage Controller
HP Embedded G5 SATA RAID Controller NOTE: This is a chip set SATA
RAID controller. It supports RAID 0 and 1 only and no BBWC. User needs
to enable the RAID option through HP RBSU (ROM Base Setup Utility)
first before the RAID can be activated. Users also need to download
the OS driver from the HP.com website
for OS Array Monitoring.
Network Controller:
One HP Integrated NC326i
Dual Port Gigabit Server Adapter
Additional Ethernet adapter ports available via
the mezzanine expansion slot
One (1) additional 10/100 network adapter dedicated
to iLO 2 Management
Mezzanine Support:
One additional I/O expansion
slot via mezzanine card
PCIe, x8,standard Mezzanine
expansion slot
PCI x4 support for HP BladeSystem PCI Expansion
Blade
Supports up to 1 additional
mezzanine card of your choice:
Dual-Port Fibre Channel
Mezzanine (4-Gb) options for SAN connectivity (choice of Emulex
or QLogic).
Ethernet Network Mezzanine options for
additional network ports
HP NC325m PCI Express
Quad Port Gigabit Server Adapter for c-Class BladeSystem
HP NC326m PCI Express Dual Port 1Gb Server
Adapter for c-Class BladeSystem
HP NC360m Dual Port 1GbE BL-c Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
HP NC373m PCI Express Dual Port Multifunction
Gigabit Server Adapter
HP NC382m Dual Port 1GbE Multifunction BL-c
Adapter
HP NC522m Dual Port
10GbE Multifunction BL-c Adapter
HP NC532m Dual Port Flex-10 10GbE Multifunction
BL-c Adapter
4X DDR InfiniBand
(IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity
(based on Mellanox technology)
Internal USB Support:
One (1) internal USB 2.0 connector for security
key devices and USB drive keys
Form Factor:
HP ProLiant BL260c server
blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
16 blades per c7000 (10u)
enclosure
8 blades per c3000 (6U)
enclosure
Infrastructure Management:
HP ProLiant Onboard Administrator (powered by the HP Integrated
Lights-Out 2 management processor) for simplified server setup,
health monitoring and recovery, power and thermal control, and lights-out
remote administration.
HP Insight Control suites deliver essential infrastructure management
that can help save time and money by making it easy to deploy, monitor,
control and optimize your IT infrastructure through a single, simple
management console. Insight Control suites support both Windows
and Linux-based servers and management consoles.
HP Insight Dynamics - VSE suite for ProLiant servers, a product
option, is an integrated command center that enables you to continuously
analyze and optimize your adaptive infrastructure. This advanced
infrastructure management software lets you reduce the cost of common
data center tasks by as much as 40 percent while keeping pace with
your changing business.
Operating Systems:
Supports Windows RHEL, SLES, OEL, Solaris, NetWare,
operating systems,
Enclosures:
HP offers three different
c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000
rack enclosure is 10U high and holds up to 16 ProLiant BL260c G5
servers plugged vertically.
The HP BladeSystem c3000
rack enclosure is 6U high and holds up to 8 HP ProLiant BL260c G5
servers plugged horizontally.
The HP BladeSystem c3000
tower enclosure is designed with casters for sites without racks
and holds up to 8 HP ProLiant BL260c G5 servers plugged vertically.
Server blades, storage blades,
interconnect modules, power supplies, fans, and redundant Onboard
Administrator modules are all designed to fit into the c3000 and c7000
enclosures.
This product is covered by a global limited warranty
and supported by HP Services and a worldwide network of HP Authorized
Channel Partners. Hardware diagnostic support and repair is available
for one year from date of purchase. Support for software and initial
setup is available for 90 days from date of purchase. Enhancements
to warranty services are available through HP Care Pack services or
customized service agreements. Hard drives have either a one year
or three year warranty; refer to the specific hard drive QuickSpecs
for details. NOTE: Server Warranty includes
1 year Parts, 1 year Labor, 1-year on-site support. Warranty repairs
may be accomplished through the use of Customer Self Repair (CSR)
parts. These parts fall into two categories: 1) Mandatory CSR parts
are designed for easy replacement. A travel and labor charge will
result when customers decline to replace a Mandatory CSR part; 2)
Optional CSR parts are also designed for easy replacement but may
involve added complexity. Customers may choose to have HP replace
Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
*
Offered through Configure-To-Order only. See Factory Integrated Models section
for more details. NOTE: Intel® 5400 series processors are Quad-Core
and support 64-bit Intel VT. Intel®. NOTE: For the Intel®
5400 series, the letter preceding the model number indicates the performance/wattage
of the processor. "X" denotes High Performance/Wattage; "E"
denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes
Lower Wattage.
Upgradeability
Upgradeable to 2 processors
when selecting Intel Xeon® 5000 sequence processors
48 GB (6 x 8 GB DIMMs) NOTE: Memory must be installed in
pairs.
Network Controller
One (1) integrated dual-port
Broadcom 5715S-based Gigabit Ethernet network adapter
One (1) additional 10/100 network
adapter dedicated to iLO 2 Management
NOTE: The Gigabit
Ethernet adapters transmit from the server only at 2000 Mbps, full duplex
per port. However, within a Linux environment, the speed can be reduced
or "throttled" using a feature available within the Linux operating
system; see the white paper at: http://h71028.www7.hp.com/ERC/downloads/4AA1-5513ENW.pdf
for more information.
Once the adapter signal reaches the interconnect within the blade enclosure
and communicates outside the blade enclosure to the LAN, the blade interconnect
uplink types and settings determine the cable media, speed, duplex mode,
and auto negotiation mode. Interconnects are available with Ethernet uplinks
supporting 10/100/1000T, 10/100/1000 SFP, 1000 SX fiber, and 10Gb KX-4.
I/O Expansion Slots
One I/O expansion mezzanine
slot (Onex8 )
Integrated Manageability
Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (integrated on motherboard)
Storage Controller
HP Embedded G5 SATA RAID Controller
NOTE: This is
a chip set SATA RAID controller. It supports RAID 0 and 1 only and no BBWC.
User needs to enable the RAID option through HP RBSU (ROM Base Setup Utility)
first before the RAID can be activated. Users also need to download the
OS driver from the HP.com website for OS
Array Monitoring
Maximum Internal
Storage
Non Hot Plug Serial ATA
(SATA)
500GB SATA
2 x 250GB SATA
Non-Hot Plug SSD (SATA)
128GB SATA
2 x 64GB SATA
Graphics
Integrated ATI RN-50 1280 x
1024 x 16M color (32 MB DDR1 memory)
Graphics Resolution Supported
Resolution Color Depths
Depths
1280 x 1024, 16.7M, 64k, 256.16
1024 x 768, 16.7M, 64k, 256,16
800 x 600, 16,7M, 64k, 256, 16
640 x 480, 16,7M, 64k, 256, 16
Fibre Channel Support
Two optional Fibre Channel HBAs are supported by the HP ProLiant BL260c G5. Both mezzanine circuit boards connect directly to the server blade system board. These Fibre Channel HBAs are available via option kits and must be ordered separately.
Two option kits
Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem (403621-B21)
Based on the same field-proven ASIC, firmware, and driver technology
as Emulex's renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver
compatible with all Emulex HBAs
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem (403619-B21)
Uses common drivers which means that customers can standardize on one QLogic driver whether they are using the QMH2462 or other 4Gb and 2Gb HBAs powered by QLogic
Emulex and QLogic Fibre Channel HBAs feature:
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds
Dual-ports for redundant path connections
Up to two FC HBAs per server blade providing redundant FC HBA support
Optimized for HP StorageWorks and supported by third party SAN vendors
Support for Microsoft® Windows® and Linux operating systems environments
Compatible
SAN
HP ProLiant BL260c G5
server blades are optimized for HP StorageWorks MSA, EVA and XP
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: www.hp.com/go/foundation.
HP ProLiant Onboard Administrator (powered by the HP Integrated Lights-Out
2 management processor) simplifies server setup, health monitoring, power
and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP ProLiant Onboard Administrator functions without
additional software, and can be accessed from any location via a web browser.
It works hand-in-hand with HP Systems Insight Manager, Insight Control
suites, and the Insight Dynamics-VSE suite helping customers unlock the
value of the ProLiant platform and deliver the highest possible quality
of IT service to the business. See www.hp.com/go/ProLiantOA
HP Insight Control suites
HP Insight Control suites, as product options,
deliver essential infrastructure management that can help save time and
money by making it easy to deploy, monitor, remote control, and optimize
your IT infrastructure through a single, simple management console. ICE
Insight Control installs and licenses software modules that are integrated
into HP System Insight Manager.
Two Insight Control suites are available for environments requiring either
a Windows or a Linux-based management console: HP Insight Control suites
include one year of 24 x 7 HP Software Technical Support and Update Service
ensuring rapid access to HP support staff and proactive delivery of software
updates. For more information about this service, please visit: http://www.hp.com/services/insight.
HP Insight Dynamics - VSE suite
The HP Insight Dynamics - VSE suite for ProLiant,
a product option, is an integrated command center that enables you to continuously
analyze and optimize your adaptive infrastructure. This advanced infrastructure
management software that allows you to analyze and optimize your adaptive
infrastructure to manage physical and virtual resources in the same way.
HP Insight Dynamics - VSE gives you a powerful toolkit to accelerate complex
technology projects and simplify daily operations. It enables you to plan
capacity and power continuously, balance across physical and virtual resources,
ensure cost-effective high availability, and provision infrastructure consistently.
HP Insight Orchestration, an optional extension to Insight Dynamics - VSE,
enables IT organizations to provision infrastructure consistently and automatically
from pools of shared resources using a self-service portal. Resources provisioned
can range from a single virtual machine to complex multi-tier environments
and their associated physical and virtual resource requirements.
HP Insight Recovery, also an optional extension for Insight Dynamics - VSE,
enables cost-effective disaster recovery for physical and virtual environments.
Application environments can be reactivated in minutes with the touch of
a button to a remote location.
NOTE:
For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your
server, please visit our Support Matrix at: http://www.hp.com/go/supportos.
Integrated Manageability
Integrated Lights-Out 2 Standard Blade Edition (iLO 2)
Virtual KVM based remote console
Virtual media (single server, browser based access only)
Remote Serial Console
Virtual Power Button Control
Virtual Unit ID control
Integrated Remote Console (ActiveX Control client)
Dedicated network connectivity
OS independent hardware health status
Present server power consumption
Browser, command line and scripted access
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)
Advanced Encryption Standard (AES)/Triple Data Encryption Standard (3DES)
IML and iLO Event Logging
Support for 12 user accounts with customizable access privilege
Single sign-on from HP BladeSystem Onboard Administrator
Availability
Dual port Fibre Channel Mezzanine card for redundant SAN connection
Advanced ECC memory - can correct a multi-bit error (up to 4 bits)
that occurs within one memory chip
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Security
One (1) internal USB 2.0 connector for security key devices and USB
drive keys on every BTO model server blade
Power-on password
Administrator's password
Integrated Lights-Out 2 has 12 customizable user accounts and SSL
encryption
Integrated Lights-Out 2 can be disabled via a Global Setting
Factory Express Portfolio for
Servers and Storage
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server
model please contact your sales representative or go to http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eConfigure Enterprise
Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs
and expectations of our valued customers. If you require "custom"
rack configuration, please contact HP's Customer Business Center or an Authorized
Partner for assistance.
Service
and Support
HP Care Pack services provide total care and support expertise with committed
response designed to meet your IT and business needs.
The HP Care Pack service for HP ProLiant BL c-Class server blades, cover
the server blade and all HP branded hardware options qualified for the
server, purchased at the same time or afterwards, internal to the server.
To fully capitalize on your HP BladeSystem servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions provides a range of support services designed
to meet the varying needs of business. Whether an SMB or large global
corporation HP has a HP BladeSystem server support offer to help you speedily
deploy and maximize system uptime. Recommended Service - Simplify ProLiant
solution implementation, maintenance and management.
Support Service - 4-Hour Response Coverage,
3-Year, 24 x 7, Same Business Day
Deployment Service - Installation and
Start Up for HP BladeSystem Infrastructure
Enhanced Service - Optimize service level to increase IT performance and availability
Support Service - HP Proactive BladeSystem
Service, 1-Year
Deployment Service - Enhanced Network
Installation and Start-up for HP BladeSystem Switches
Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced Network Installation and Start-UP as per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.
Cache
Memory One of the following depending
on model
1x 6 MB Level
2 cache
Memory
One of the following depending on model
1
GB (2 x 512 MB) PC2-5300, FBD DDR2-667 2 GB (2 x 1 GB) PC2-5300, FBD DDR2-667
Network Adapter
One
(1) integrated dual-port Gigabit Ethernet Broadcom 5715S-based network adapter
plus one (1) additional 10/100 network adapter dedicated to iLO 2 Management
Storage Controller
HP
Embedded G5 SATA RAID Controller
Hard
Drives
No drives included; (2)
SFF Non-Hot Plug SATA drive bays
Internal
Storage
SATA: 500GB
Optical Drive
None
Form Factor
Up
to 8 half-height blades supported in HP BladeSystem c3000 Enclosure Up to
16 half-height blades supported in HP BladeSystem c7000 Enclosure
Uni-Processor Models NOTE:
The models below support Quad-Core, Dual-Core and Single–Core Xeon®
uP® Processors. NOTE: If
a Uni-processor model is selected, it cannot support a 2nd processor.
HP
BL260c G5 X3323 2G (1P) 467956-B21
HP
BL260c G5 E6405 2G (1P) 467957-B21
HP
BL260c G5 445 1G (1P) 467958-B21
Processor(s) One of the following depending on model
Configuration Information - Factory Integrated Models
NOTE:
This section lists some of the steps required to configure a Factory Integrated
Model. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for information
on CTO product offerings and requirements. NOTE: HP does not allow
factory integration of options into standard models listed above. Configure-to-order
server blades must start with a CTO Blade. NOTE: FIO indicates that
this option is a Factory Installable Option.
Step
1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP
ProLiant BL260c G5 CTO Blade
467657-B21
Configurable
Model ships with:
One
(1) integrated NC326i (Broadcom 5715) Gigabit Ethernet Adapter plus one (1) additional
10/100 network adapter dedicated to iLO 2 Management
Integrated
Lights-Out 2 Standard Blade Edition
Step
2: Choose Required Options (one of the following from each list unless otherwise
noted):
Processors
For
single processor configuration choose:
Intel® Xeon®
5000 Sequence Processor Option Kits:
Quad-Core Processor
Option Kits
Intel®
Xeon® processor E5450 (3.00 GHz, 1333 FSB, 80W), FIO Base NOTE:
If 2 processors are desired, select one 464885-B21 and one 464885-B21
HP NC325m PCI Express Quad Port
1Gb Server Adapter for c-Class BladeSystem
416585-B21
HP NC326m PCI Express Dual Port
1Gb Server Adapter for c-Class BladeSystem
406771-B21
HP NC360m Dual Port 1GbE BL-c
Adapter
445978-B21
HP NC364m Quad Port 1GbE BL-c
Adapter
447883-B21
HP NC382m Dual Port 1GbE Multifunction
BL-c Adapter
453246-B21
HP NC532m Dual Port Flex-10 10GbE
Multifunction BL-c Adapter NOTE: The NC532m network adapter
card is required for each server blade connecting to a 10Gb interconnect
in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem
c3000 Enclosure) NOTE: The NC532m requires a minimum of 2 GB of server memory. NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
467799-B21
HP NC522m Dual Port 10GbE Multifunction
BL-c Adapter NOTE: The NC522m requires a minimum
of 2 GB of server memory. NOTE: The NC522m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
467801-B21
QLogic QMH4062 1Gb E iSCSI Adapter
for HP BladeSystem c-Class
488074-B21
NOTE: The Gigabit
Ethernet adapters above transmit from the server only at 2000 Mbps, full
duplex per port. For more information, see the "Network Controller"
segment in the Standards Features section.
Fiber Channel Mezzanine
Options
Emulex LPe1105 FC Dual Channel 4Gb, PCI-E-to-Fibre Channel Host Bus Adapter
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and
the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all
components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SATA Non-Hot Plug SFF Entry (ETY)
Disk Drives
HP 250GB 3G SATA 5.4K NHP SFF
ETY HDD
460357-B21
HP 120GB 1.5G SATA 5.4K NHP SFF
ETY HDD
459357-B21
NOTE: Please see
the SATA Hard Drive QuickSpecs for Technical Specifications such as capacity,
height, width, interface, transfer rate, seek time, physical configuration,
and operating temperature: http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
HP Solid State Drives (SSD) For
ProLiant Server Blades
NOTE: Electronic
licensing options are available for Insight Control suites software products.
Please see the appropriate Insight Control QuickSpecs for additional information.
Insight Control suite
HP Insight Control suite, No Media,
1-Server License including 1 year of 24x7 Technical Support and Updates NOTE: Customer will receive a printed
license entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license
activation key(s). Includes one year of 24 x 7 HP Software Technical Support
and Update Service.
452148-B22
HP Insight Software Media Kit
NOTE: Insight Software DVD media
without licenses. Contains Insight Control suite and other Insight software
products and components licensed by Insight Control suites. Uses an integrated
installer to perform quick and accurate software installation and updates.
HP Insight Control suite for Linux,
No Media, 1-Server license, including one year of 24x7 Technical Support
and Updates NOTE: This part number can be used
to purchase one (1) license with a single activation key. Customer will
receive a printed license entitlement certificate via physical shipment.
The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x
7 HP Software Technical Support and Update Service. NOTE: One certificate is shipped for each license.
464423-B22
HP Insight Control suite for Linux,
Media pack (DVD) - No licenses included NOTE: This optional Media pack DVD
contains HP Insight Control suite for Linux, HP System Insight Manager,
HP Insight Power Manager, HP Insight Virtual Machine Management software,
and an integrated installer. Servers must be acquired separately. NOTE: This Media pack is optional because the latest ISO image and
latest updates may be downloaded at no cost from: http://www.hp.com/go/ice-linux
(click on Download button).
HP Integrated Lights-Out Advanced
for BladeSystem, No Media, 1-Server License, including 1 year of 24x7 Technical
Support and Updates NOTE: This license allows 1 server
to be managed via HP iLO Advanced for BladeSystem. Customer will receive
a printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support Service.
HP Insight Rapid Deployment software
No Media 1-Server License including 1 year of 24x7 Technical Support and
Updates NOTE: The license entitlement certificate
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
HP PCI Expansion Blade NOTE: Ships with one pre-installed
PCI-X connect board. Also includes one PCIe connect board which requires
installation. NOTE: Please see the for Technical Specifications and additional
information at: http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
448018-B21
HP
Ultrium Tape Blades
HP StorageWorks
SB920c Tape Blade NOTE: LTO-3 Ultrium
technology
AJ401A
HP
StorageWorks Ultrium 448c Tape Blade NOTE:
LTO-2 Ultrium technology
440947-B21
NOTE:
The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem (431643-B21) is
required when installing a tape blade adjacent to a full-height server blade. NOTE: Please see the for Technical Specifications and additional information
at: http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
HP 4GB USB Flash Media Key Kit NOTE: Blank USB media device is supported
for use with ProLiant iVirtualization. USB media must be installed in the
internal slot of the ProLiant server. Learn more at http://www.hp.com/go/proliantvirtualization.
580385-B21
Service and Support
Offerings
(HP Care Pack Services)
NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Year, Electronic
UK042E
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Year, Electronic
UK043E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Year, Electronic
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
DIMM installation guidelines:
All DIMMs must be PC2-5300 Registered DDR2, 667 MHz,
ECC DIMMS.
Both DIMM slots in a memory bank should be populated.
The blade will work with 1 DIMM but not recommended as performance will
suffer.
Banks must be populated in sequential alphabetic
order, starting with bank A.
Both DIMMs in a memory bank should be identical.
Install identical DIMMs as pairs only, starting with DIMM socket 1,
bank A. If not; performance will suffer.
Multiple advanced memory protection (AMP) modes
are supported, based on DDR2 DIMM population and RBSU selection. The
server blade defaults to Advanced ECC
HP ProLiant BL260 G5c Server Blade (1P Model)
Standard Memory
1024 MB (2 x 512 MB) or 2048 MB (2 x 1024 MB) (depending on model)of PC2-5300,
Registered, DDR2-667 ECC DIMMs
Standard Memory Plus Optional
Memory
Up to 17408 MB or 18432 MB (depending on model) of PC2-5300, Registered,
DDR2-667 ECC DIMMs. Memory is available with the installation of optional
PC2-5300, Registered, DDR2-667 ECC DIMMs memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 24576 MB of PC2-5300, Registered, DDR2 667MHz, ECC DIMMs. Memory
is available with removal of standard and the installation of optional
PC2-5300, Registered, DDR2-667 ECC DIMM memory expansion kits.
Hard Drives NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
Serial-ATA (SATA) Non-Hot
Plug SFF Entry (ETY) Hard Drive
Quantity
Supported
Position Supported
Controller
250GB 3G SATA 5.4K 120GB 1.5G
SATA 5.4K
2
1-2
HP
Embedded G5 SATA Controller
HP
Solid State Drives (SSD) For ProLiant Server Blades
Quantity
Supported
Position Supported
Controller
32GB 1.5G SATA NHP SFF SP ENT
SSD
64GB 1.5G SATA NHP SFF SP ENT SSD
2
1-2
HP
Embedded G5 SATA Controller
NOTE:
Software RAID is not supported in Solid State Drives (SSD)
External Storage
Quantity
Supported
Position
Supported
Host Controller or Adapter
XP Disk Array Systems
Please
see the XP Disk Array Systems QuickSpecs below to determine configuration
requirements
External
Please see the XP Disk Array Systems
Quick Specs for the latest list of supported HBAs
10° to 35°C (50° to 95°F) at sea level with an altitude derating
of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to
a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of
change is 10°C/hr (18°F/hr). The upper limit may be limited by the type
and number of options installed.
System performance may be reduced if
operating with a fan fault or above 30°C (86°F).
Non-operating
-30°
to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity
(non-condensing)
Operating
10
to 85% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature,
non-condensing.
Non-operating
5
to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature,
non-condensing.
Altitude
Operating
3050
m (10,000 ft). This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144
m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
HP Integrated NC326i
Dual Port Gigabit Server Adapter Network Processor
Network Processor
Broadcom 5715S
Data Transfer Method
Four lane (x4) PCI
Express
Network Transfer Rate
2000 Mb/s full duplex
(theoretical maximum value)
IEEE Compliance
802.1p, 802.1Q, 802.3,
802.3ad, and 802.3x
Standard Features
9K jumbo frames
TCP/IP checksum offload (TCO)
Large send offload (LSO)
Interrupt coalescence
Dual address cycles (DAC)
Wake-on-LAN (WOL)
Pre-boot execution environment (PXE)
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
IPv6 packet transmit and receive (excluding all offload capabilities);
IPv6 aware SNMPv1 agents for Windows
Environment-friendly Products and
Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
DL QuickSpecs
US QuickSpecs 
464885-B21
